Off-Road Nitro Parts

This is the 1/8 Buggy Tire Bag from ProTek RC.

The ProTek RC 1/8 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 8" tall, 4.75" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 17" wide, 12"deep, and 9" tall.

The lid of the bag features a large ProTek RC logo in white, and has a 16x11" mesh zipper pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory.

Features:

• Perfect for 1/8 Buggy, 1/10 Short Course, No Prep/Outlaw Drag Racing, and Crawler tires smaller than 12cm
• Six airtight 20.5cm tall, 12cm diameter PET tubes with screw on lid
• Heavy duty nylon material
• Bag measures 43.5cm wide, 30.5cm deep and 23cm tall
• Internal 40.5 x 28cm mesh zippered pocket

The ProTek R/C 1/10 Buggy Carrying Bag is a clean and convenient way to transport your buggy.

Designed for racers looking for a convenient solution to transport an electric 1/10 buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.

The ProTek R/C Carrying Bag is big enough to fit one 1/10 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.

The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your workshop. At the races, roll the bag up until you need it again.

Features:

• Fits 1/10 buggies with tires on
• Contains all dirt and grime inside
• Foam padded
• Carry-on sized for flights
• Can be rolled up when not in use
• Convenient side carrying handle
• Can be used with optional shoulder strap

Specifications:
Fits: 1/10 buggy w/body and w/tires
Dimensions (W x L x H): 28 x 41 x 11cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included

The ProTek R/C 1/8 Buggy Carrying Bag is a clean and convenient way to transport your buggy.

Designed for racers looking for a convenient solution to transport a nitro or electric buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.

The ProTek R/C Carrying Bag is big enough to fit one 1/8 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.

The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.

Features:

• Fits 1/8 buggies with tires on
• Contains all dirt and grime inside
• Foam padded
• Carry-on sized for flights
• Can be rolled up when not in use
• Convenient side carrying handle
• Can be used with optional shoulder strap

Specifications:
Fits: 1/8 buggy w/body and w/tires
Dimensions (W x L x H): 34 x 45.5 x 14.5cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included

The ProTek R/C 1/8 Truggy Carrying Bag is a clean and convenient way to transport your truggy.

Designed for racers looking for a convenient solution to transport a nitro or electric Truck, this bag is a great way to keep your Truck from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.

The ProTek R/C Carrying Bag is big enough to fit one 1/8 Truggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.

The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the Truggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.

Features:

• Fits 1/8 buggies with tires on
• Contains all dirt and grime inside
• Foam padded
• Carry-on sized for flights
• Can be rolled up when not in use
• Convenient side carrying handle
• Can be used with optional shoulder strap

Specifications:
Fits: 1/8 truggy w/body and w/tires
Dimensions (W x L x H): 44.5 x 53.5 x 12cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included

The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use. 

Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!

The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.

The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.

Features:

• Durable, heavy-duty bag material
• Dual handles won't interfere with tires
• Safe, one handed pit operation
• Straps optimized for truggy use
• No fumes in your face
• Compatible with boxes up to 14cm wide x 36.8cm long
• Made in the USA

Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8

This is the Pro Pit Pack from ProTek RC.

Designed for racers and mechanics alike, this versatile pack ensures that your essential tools and accessories are organized and easily accessible during pit stops. Whether you're at the track or in the workshop, the Pro Pit Pack keeps everything you need within reach, allowing for quick and efficient adjustments.

Constructed from heavy-duty fabric, this pack is built to withstand the rigors of the racing environment. Its compact design makes it easy to carry, while a zippered compartment and elastic straps securely hold your tools, ensuring nothing is left behind. The zippered pouch is perfect for storing small parts like glow plugs, and the additional elastic straps behind the zippered pouch are ideal for items like tuning screwdrivers or glow igniters. With belt clips included, this is a must have for any racer!

Features:

• Compact design for easy portability
• Durable construction to withstand tough conditions
• Multiple compartments for organized storage
• Elastic straps to securely hold tools in place
• Zippered pouch for small part storage

This is the Fuel Gun and Bottle Holster from ProTek RC.

This innovative and handy accessory allows you to securely carry your fuel gun and bottle, making it easy to access during races and practice sessions. No more fumbling around searching for your fuel bottle or gun, give yourself the holster the pro's use and dominate pit lane!

Note: This holster fits most fuel bottles and guns but may not be compatible with every option available. We recommend the ProTek RC "Fast Fill 2" fuel bottle (PTK-7606) and the ProTek RC "Quick Pit 2" Dump Fuel Gun (PTK-7608) for proper fitment.

Features:

• Securely holds fuel gun and bottle
• Convenient for quick access during races
• Durable construction for long-lasting use
• Secure belt loop and thigh strap mounting
• Pair with the ProTek RC Pro Pit Pack (PTK-8125) for the ultimate pit stop experience!
• Holds both a fuel bottle Fuel Gun