Losi 8ight 3.0 Nitro Buggy Parts
This is the Clutch Rebuild/Service Box from Team Losi Racing for their 8ight buggy & 8ight-T Truggy.
This set includes:- Composite Clutch Shoes (4)
- Aluminium Clutch Shoes (4)
- Clutch Nut, 1/8 (1)
- Spacer, 1/8 4 Shoe Clutch (2)
- 3 x 6mm Button Head Screw, Zinc (4)
- 3 x 8mm Flat Head Screw (4)
- Shim, 5 x 7 x.2mm (12)
- Flywheel Collet (4)
- Clutch Screw, 4 Shoe (16)
- Crank Spacer Washer (2)
- Clutch Spring, .040 Diameter (8)
- Clutch Spring, .040 Diameter (8)
- Clutch Spring, .036 Diameter (8)
- Clutch Spring, .036 Diameter (8)
- Ball Bearing, 5x10x4 HD (2)
- Ball Bearing, 5x13x4 HD (2)
- Instructions (1)
- Plastic Box (1)
- Losi Sticker (1)
- Scotchbrite pad (1)
The 1/8 Nitro 8IGHT 3.0 Cab Forward body was designed to give the Team Losi Racing 8IGHT 3.0 buggy more down force and better stability on the straight-away and over jumps.
This is the first body to have an optional rear fin that is removable and will give the buggy an increase in side-bite when installed.
Features:
- Cab Forward Design – Better overall down force, improving steering and overall stability
- Optional Rear Fin – Provides more tuning options by giving the 8IGHT 3.0 more side-bite. Proper mounting hardware is included
- Window Mask – A quick and easy solution to mask windows for painting
- Pre-Cut Body – The cab forward 8IGHT 3.0 body comes completely trimmed allowing for easy mounting
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Key Features:
- Machined from massive 6mm thick aircraft grade aluminium
- Hard anodize coated for long lasting good looks
- Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
- Quickly change out the adjustment cams for 0.5° increment adjustments
- Front Brace allows Kick-Up adjustment from -2° to +2° from standard
- Adjustment cams are available separately and can be replaced quickly and easily
These are the updated 2.0 rear hub carriers, which feature a new inner camber link hole and are designed to be used with 3.5mm hingepins.
These hub carriers have been CNC machined from high quality aluminium, and hard anodized for durability and good looks.
This brace set with inserts includes 16 adjustment cams for quick and easy Rear Toe, and Anti-Squat adjustments.
Key Features:
- Machined from massive 6mm thick aircraft grade aluminium
- Hard anodize coated for long lasting good looks
- Includes 16 adjustment cams for quick and easy Rear Toe and Anti-Squat adjustments
- Quickly change out the adjustment cams for 0.5° increment adjustments
- Adjustment cams are available separately and can be replaced quickly and easily
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Features
- Machined from massive 6mm thick aircraft grade aluminium
- Hard anodize coated for long lasting good looks
- Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
- Rear Brace facilitate Toe adjustment from 1-3°, and Anti-Squat from 2-4°
- Quickly change out the adjustment cams for 0.5° increment adjustments
- Adjustment cams are available separately and can be replaced quickly and easily
- Higher roll center for better support in the rear and turn initiation when using stock caster blocks.
Packet Includes:
- 2 x 1.4 x 5 tapered hole pistons
- 2 x 1.5 x 5 tapered hole pistons
Packet Include:
- 1 x front gear box halves
- 1 x rear gear box halves
- 2 x rear gear box bearing inserts
NOTE: Do not fit Truggies.
Does not fit the 8ight-X models
Key Features:
- High-durability aluminium allows inserts to be used for the life of the vehicle
- Hard anodized to improve durability and be resistant against scratching
- Left- and right-side inserts key into gear box to disallow any rotation of the inserts that can cause drivetrain failure
- Laser-etching identification designates inserts for 2.0 gear boxes only
- .1 and .25mm shims included for differential shimming
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Yellow wing
- 2x wickerbills
- Required hardware
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x White wing
- 2x wickerbills
- Required hardware
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
This set includes:
- Four 8x14x4mm bearings
Packet Includes:
- 2 x five 1.4mm hole pistons
- 2 x five 1.5mm hole pistons
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Packet Includes:
- 2 x 1.3 x 8 hole piston
- 2 x "split" pistons that have four 1.3 holes and four 1.2 holes
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
Also fits most other brand Nitro Buggies.
NOTE: This does not fit the TLR 8IGHT Truggy.
Has less binding than CV driveshaft to allow the suspension to work better on rough tracks
NOTE: The spring cups included in this packet are not compatible with the Losi 16mm shocks included with the 8IGHT 3.0/4.0 vehicles. The rod ends, rod end pivot balls and shock cap bushings are compatible with the 8IGHT 3.0/4.0, but the 3.0/4.0 uses the TLR243009 16mm spring cups.
This packet contains all the gears and pins to rebuild one differential.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
This set includes:
- Four 8x16x5mm bearings
This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.
These axles are universal and can be used for the front or rear of the buggy.
One of the easiest ways to improve overall performance is to reduce rotating weight. The Lightened HD Center Outdrives provide just such an advantage over the competition. These outdrives are “Heavy Duty” type direct replacement parts that fit the center differential of all 8IGHT and 8IGHT-T models and feature tight tolerance flats for the brake discs. These parts are precision machined from premium high-carbon steel and feature additional machining to remove heavy steel material without sacrificing strength. These ultra strong and light weight parts are heat treated to produce a hard wear resistant surface then get a black rust-resistant finish.
Features
- Reduce rotating weight
- Fit the center differential of all 8IGHT and 8IGHT-T models
- Parts are precision machined from premium high-carbon steel and feature additional machining to remove heavy steel material without sacrificing strength
- Parts are heat treated to produce a hard wear resistant surface then get a black rust-resistant finish
This set includes:
- Four 6x12mm bearings
This set includes:
- Four 6x10x3mm bearings
Does not fit the 8ight-X models
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Fits 3.0 Buggy Only (Use TLR244016 For Truggy)
These inserts are installed over the steering and throttle servo output shafts.
These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.
Losi center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the CV coupler wears.
This set includes:
- Four 8x14x4mm Flanged Bearings
When compared to the kit black rod ends these new Low Friction Moly rod ends do not bind up under loading allowing the suspension to be more plush creating a quicker more stable car.
Packet includes:
- 3 x Differential Gaskets
- 6 x Differential outdrive seals
This set includes:
- Four 5x11x4mm bearings
Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.
This set of Gear Box Shims includes:
- 10 x 14x17x.25mm Shims
- 10 x 14x17x.10mm Shims
NOTE: These are not to fit a 8IGHT-X
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
- 2x .250 spacers
- 2x .500 spacers
These are the springs that are installed in between the brake calipers.
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
These couplers are to be used for the front or rear of the buggy.
NOTE: These are not to fit a 8IGHT-X
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
- 1