Losi 8ight-T 2.0 Standard Parts

This is the Clutch Rebuild/Service Box from Team Losi Racing for their 8ight buggy & 8ight-T Truggy.

This set includes:

• Composite Clutch Shoes (4) 
• Aluminium Clutch Shoes (4) 
• Clutch Nut, 1/8 (1) 
• Spacer, 1/8 4 Shoe Clutch (2) 
• 3 x 6mm Button Head Screw, Zinc (4) 
• 3 x 8mm Flat Head Screw (4) 
• Shim, 5 x 7 x.2mm (12) 
• Flywheel Collet (4) 
• Clutch Screw, 4 Shoe (16) 
• Crank Spacer Washer (2) 
• Clutch Spring, .040 Diameter (8) 
• Clutch Spring, .040 Diameter (8) 
• Clutch Spring, .036 Diameter (8) 
• Clutch Spring, .036 Diameter (8) 
• Ball Bearing, 5x10x4 HD (2)
• Ball Bearing, 5x13x4 HD (2) 
• Instructions (1) 
• Plastic Box (1) 
• Losi Sticker (1) 
• Scotchbrite pad (1)

This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.

Key Features:

• Machined from massive 6mm thick aircraft grade aluminium
• Hard anodize coated for long lasting good looks
• Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
• Quickly change out the adjustment cams for 0.5° increment adjustments
• Front Brace allows Kick-Up adjustment from -2° to +2° from standard
• Adjustment cams are available separately and can be replaced quickly and easily

This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.

Features

• Machined from massive 6mm thick aircraft grade aluminium
• Hard anodize coated for long lasting good looks
• Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
• Rear Brace facilitate Toe adjustment from 1-3°, and Anti-Squat from 2-4°
• Quickly change out the adjustment cams for 0.5° increment adjustments
• Adjustment cams are available separately and can be replaced quickly and easily
• Higher roll center for better support in the rear and turn initiation when using stock caster blocks.

This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

Does not fit the 8ight-X models

Key Features:

• High-durability aluminium allows inserts to be used for the life of the vehicle
• Hard anodized to improve durability and be resistant against scratching
• Left- and right-side inserts key into gear box to disallow any rotation of the inserts that can cause drivetrain failure
• Laser-etching identification designates inserts for 2.0 gear boxes only
• .1 and .25mm shims included for differential shimming

This is a packet of (2) Front/Rear CV Drive Shafts from Team Losi Racing for their 8IGHT-T 2.0 & 3.0 racing Truggy.

These drive shafts can be used in either the front of rear of the vehicle.

This is a packet of (4) 8mm x 14mm x 4mm bearings from Team Losi Racing.


This set includes:

• Four 8x14x4mm bearings

This is a Fuel Tank from Team Losi Racing for their 8ight-T Truggy 2.0 & 3.0.

This is a Shock End, Cup & Bushing Set from Team Losi Racing for most of their 8IGHT racing buggies.

NOTE: The spring cups included in this packet are not compatible with the Losi 16mm shocks included with the 8IGHT 3.0/4.0 vehicles. The rod ends, rod end pivot balls and shock cap bushings are compatible with the 8IGHT 3.0/4.0, but the 3.0/4.0 uses the TLR243009 16mm spring cups.

This is a Differential Gear & Shaft Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This packet contains all the gears and pins to rebuild one differential.

This is a packet of (4) 8mm x 16mm x 5mm bearings from Team Losi Racing.


This set includes:

• Four 8x16x5mm bearings

This is a packet of (2) 3.5mm Outer Hinge Pin Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

This is a packet of (6) Light Weight Aluminium Differential Shafts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.

This is a packet of (2) Front/Rear CV Driveshaft Axles from Team Losi Racing for their 8ight 1.0, 2.0 & 3.0 racing buggies and 8ight-T Truggies 1.0, 2.0 & 3.0.

These axles are universal and can be used for the front or rear of the buggy.

This is a packet of (4) 6x12mm bearings from Team Losi Racing.


This set includes:

• Four 6x12mm bearings

This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.


This set includes:

• Four 6x10x3mm bearings

This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

Does not fit the 8ight-X models

This is a packet of (2) Metal Servo Arm Inserts from Team Losi Racing intended for use with Futaba, ProTek R/C, Highest, Savox, and Orion servos, as well as any servo that uses a 25T spline pattern.

These inserts are installed over the steering and throttle servo output shafts.

This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.


This set includes:

• Four 8x14x4mm Flanged Bearings

This is a packet of Differential gaskets and seals from Team Losi Racing for their 8ight range of Buggies and Truggies.

Packet includes:

• 3 x Differential Gaskets
• 6 x Differential outdrive seals

This is a  packet of (12) 6x11x.2mm Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.


This set includes:

• Four 5x11x4mm bearings

This is a 4x50mm Shock Shaft from Team Losi Racing for their 8IGHT racing buggy and 8ight-T Truggy 1.0 & 2.0.

This is a Chassis Guard Set from Team Losi Racing for their 8ight-T 2.0 & 3.0 Racing Truggy.

This is a Drive Pin Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.

This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This is a  packet of (20) Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This set of Gear Box Shims includes:

• 10 x 14x17x.25mm Shims
• 10 x 14x17x.10mm Shims
  
  

This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.

NOTE: These are not to fit a 8IGHT-X

This is a packet of (4) Front Arm Bushing from Team Losi Racing for their 8ight-T 2.0 Racing Truggy.

This is a Brake Pad & Screw Set from Team Losi Racing for their 8IGHT 2.0, 3.0 and 4.0 Nitro buggies & truggies.

This is a packet of (4) 6.8mm Flanged Suspension Ball (4) from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.

This is a packet of (4) Bladder Compensators from Team Losi Racing included with the 8IGHT 2.0 EU kit, but can be used on any of the 8IGHT family of vehicles.

These foam bladder inserts are installed between the shock cap and the shock bladder and help to re-enforce the bladder, providing more consistent shock damping.

This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.

This is a packet of (2) F/R CV Driveshaft Coupling Sets from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0, 3.0 & 4.0.

These couplers are to be used for the front or rear of the buggy.

This is a tuned pipe mount from Team Losi Racing compatible with their 8ight family of vehicles.

This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.


NOTE: These are not to fit a 8IGHT-X

This is a 4x57mm Shock Shaft from Team Losi Racing for their 8IGHT racing buggy and 8ight-T Truggy 1.0 & 2.0.

This is a Rear Chassis Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0 & 3.0.