Losi 8ight-T 3.0 Standard Parts

This is the Clutch Rebuild/Service Box from Team Losi Racing for their 8ight buggy & 8ight-T Truggy.

This set includes:

• Composite Clutch Shoes (4) 
• Aluminium Clutch Shoes (4) 
• Clutch Nut, 1/8 (1) 
• Spacer, 1/8 4 Shoe Clutch (2) 
• 3 x 6mm Button Head Screw, Zinc (4) 
• 3 x 8mm Flat Head Screw (4) 
• Shim, 5 x 7 x.2mm (12) 
• Flywheel Collet (4) 
• Clutch Screw, 4 Shoe (16) 
• Crank Spacer Washer (2) 
• Clutch Spring, .040 Diameter (8) 
• Clutch Spring, .040 Diameter (8) 
• Clutch Spring, .036 Diameter (8) 
• Clutch Spring, .036 Diameter (8) 
• Ball Bearing, 5x10x4 HD (2)
• Ball Bearing, 5x13x4 HD (2) 
• Instructions (1) 
• Plastic Box (1) 
• Losi Sticker (1) 
• Scotchbrite pad (1)

This is a packet of (4) 16mm Shock Nuts & O-rings from Team Losi Racing compatible with all their 16mm Shocks.

This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.

Key Features:

• Machined from massive 6mm thick aircraft grade aluminium
• Hard anodize coated for long lasting good looks
• Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
• Quickly change out the adjustment cams for 0.5° increment adjustments
• Front Brace allows Kick-Up adjustment from -2° to +2° from standard
• Adjustment cams are available separately and can be replaced quickly and easily

This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.

Features

• Machined from massive 6mm thick aircraft grade aluminium
• Hard anodize coated for long lasting good looks
• Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
• Rear Brace facilitate Toe adjustment from 1-3°, and Anti-Squat from 2-4°
• Quickly change out the adjustment cams for 0.5° increment adjustments
• Adjustment cams are available separately and can be replaced quickly and easily
• Higher roll center for better support in the rear and turn initiation when using stock caster blocks.

This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x 1.4 x 5 tapered hole pistons
• 2 x 1.5 x 5 tapered hole pistons

This is a Front & Rear Gear Box Set from Team Losi Racing compatible with their 8ight family of vehicles, and have been molded from a stiffer material to deliver a more consistent gear mesh under load.

Packet Include:

• 1 x front gear box halves
• 1 x rear gear box halves
• 2 x rear gear box bearing inserts

This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

Does not fit the 8ight-X models

Key Features:

• High-durability aluminium allows inserts to be used for the life of the vehicle
• Hard anodized to improve durability and be resistant against scratching
• Left- and right-side inserts key into gear box to disallow any rotation of the inserts that can cause drivetrain failure
• Laser-etching identification designates inserts for 2.0 gear boxes only
• .1 and .25mm shims included for differential shimming

This is a packet of (2) 16mm Shock Bodies from Team Losi Racing for the rear of their 8IGHT-T 3.0 & 4.0 1/8 truggies.

This is a Steering Rack Set with Hardware from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies & 8IGHT-T 3.0 and 4.0 Truggies.

This is a packet of (2) Front/Rear CV Drive Shafts from Team Losi Racing for their 8IGHT-T 2.0 & 3.0 racing Truggy.

These drive shafts can be used in either the front of rear of the vehicle.

This is a packet of (4) 8mm x 14mm x 4mm bearings from Team Losi Racing.


This set includes:

• Four 8x14x4mm bearings

This is a Fuel Tank from Team Losi Racing for their 8ight-T Truggy 2.0 & 3.0.

This is a packet of (4) 16mm 5-hole Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x five 1.4mm hole pistons
• 2 x five 1.5mm hole pistons

The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.  

This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x 1.3 x 8 hole piston
• 2 x "split" pistons that have four 1.3 holes and four 1.2 holes

This is a packet of (4) Droop Screws from Team Losi Racing suitable for most of their 1/8 buggies and truggies.

These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.

This is a Shock End, Cup & Bushing Set from Team Losi Racing for most of their 8IGHT racing buggies.

NOTE: The spring cups included in this packet are not compatible with the Losi 16mm shocks included with the 8IGHT 3.0/4.0 vehicles. The rod ends, rod end pivot balls and shock cap bushings are compatible with the 8IGHT 3.0/4.0, but the 3.0/4.0 uses the TLR243009 16mm spring cups.

This is a Differential Gear & Shaft Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This packet contains all the gears and pins to rebuild one differential.

This is a packet of (4) 8mm x 16mm x 5mm bearings from Team Losi Racing.


This set includes:

• Four 8x16x5mm bearings

This is a packet of (2) 3.5mm Outer Hinge Pin Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

This is a packet of (6) Light Weight Aluminium Differential Shafts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.

This is a packet of (2) Front/Rear CV Driveshaft Axles from Team Losi Racing for their 8ight 1.0, 2.0 & 3.0 racing buggies and 8ight-T Truggies 1.0, 2.0 & 3.0.

These axles are universal and can be used for the front or rear of the buggy.

This is a packet of (4) 6x12mm bearings from Team Losi Racing.


This set includes:

• Four 6x12mm bearings

This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.


This set includes:

• Four 6x10x3mm bearings

This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.

Does not fit the 8ight-X models

This is a 4x67mm TiCn Shock Shaft from Team Losi Racing for the rear of their 8IGHT-T 3.0 & 4.0 1/8 truggies.

The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.

This is a 4x59.5mm TiCn Shock Shaft from Team Losi Racing for the rear of their 8IGHT 3.0 & 4.0 1/8 buggies and front of their 3.0 & 4.0 1/8 truggies.

The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.

This is a packet of (2) 15° Front Spindle Carriers from Team Losi Racing for their 8ight 3.0 Racing Buggy.

15° non-inclined caster blocks raise the spindle, allowing the vehicle to soak up bumps with less dog bone plunge.

Fits 3.0 Truggy Only (Use TLR244004 For Buggy)

This is a packet of (2) Metal Servo Arm Inserts from Team Losi Racing intended for use with Futaba, ProTek R/C, Highest, Savox, and Orion servos, as well as any servo that uses a 25T spline pattern.

These inserts are installed over the steering and throttle servo output shafts.

This is a packet of (4) 16mm Shock Bladders from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm 1.2mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm 1.3mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm Split Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.

This is a packet of (4) Lower Shock Cap Seals & (8) X-Ring Seals from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.


This set includes:

• Four 8x14x4mm Flanged Bearings

This is a packet of (8) 5mm Low Friction Moly Rod Ends from Team Losi Racing compatible with their 8ight family of vehicles.

When compared to the kit black rod ends these new Low Friction Moly rod ends do not bind up under loading allowing the suspension to be more plush creating a quicker more stable car.

This is a packet of Differential gaskets and seals from Team Losi Racing for their 8ight range of Buggies and Truggies.

Packet includes:

• 3 x Differential Gaskets
• 6 x Differential outdrive seals

This is a  packet of (12) 6x11x.2mm Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This is a packet of (4) Shock Spring Cup from Team Losi Racing compatible with their 8IGHT 3.0 & 4.0 Buggies and Truggies.

This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.


This set includes:

• Four 5x11x4mm bearings

This is a Drive Pin Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.

This is a Coupler Outdrive from Team Losi Racing for their 8IGHT 3.0 & 4.0 1/8 buggy and truggy.

This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.

This is a  packet of (20) Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This set of Gear Box Shims includes:

• 10 x 14x17x.25mm Shims
• 10 x 14x17x.10mm Shims
  
  

This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.

NOTE: These are not to fit a 8IGHT-X

This is a packet of (2) Ackerman Shoulder Screws from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Ball raced Ackerman Plate.

This is a .250 & .500 Wing Spacer Set from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0, 3.0 & 4.0.

These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.

Packet includes:

1. 2x .250 spacers
2. 2x .500 spacers

This is a Brake Pad & Screw Set from Team Losi Racing for their 8IGHT 2.0, 3.0 and 4.0 Nitro buggies & truggies.

This is a Tri-Horn from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Gen III Radio Tray.

This is a packet of (4) Brake Caliper Springs from Team Losi Racing for their 8IGHT 3.0 & 4.0 1/8 buggy and truggy.

These are the springs that are installed in between the brake calipers.

This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.

This is a tuned pipe mount from Team Losi Racing compatible with their 8ight family of vehicles.

This is a packet of (2) F/R CV Driveshaft Coupling Sets from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0, 3.0 & 4.0.

These couplers are to be used for the front or rear of the buggy.

This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.


NOTE: These are not to fit a 8IGHT-X

This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies & 8IGHT-T 3.0 and 4.0 Truggies.

This is a packet of (8) 16mm Shock Piston Washers from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.

This is a Rear Chassis Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0 & 3.0.