Losi 8ight-X Elite Upgrade/Optional Parts
These weights should be secured with the included screws; We recommend also use a small amount of blue loctite to avoid them vibrating loose.
Packet includes:
- 1 x 20g Brass Weight
- 1 x 40g Brass Weight
- 2 x mounting screws
The Punisher body by JConcepts for the TLR 8ight-X Elite is unique. As with all new and popular vehicles on the market, JConcepts wanted to deliver the best looking and performing body shell on the market. Throw everything you know out the window, the Punisher separates itself from the rest of the bodies on the market with its distinctive styling. In the hands of Dakotah Phend, the P1 body shell debuted at the 2020 Southern Indoor Championships.
In the development stage, the P1 was difficult, trying to slick out a design more powerful than the last. However, after fitment, discussion with newly acquired drivers, the form started to take shape. Incredibly low side-pod designs with an ultra-heavy chamfer are traditional looks for JConcepts, however, the power scoops along the cab add some overall muscle to the design, and that gets any racer wired.
The P1 has a broad cab and the placement moves it forward just behind the body mount and front shock tower. The new body was designed to turn and cut through the rough stuff with balance and precision. A centered roof “shark fin” is light and adds, tracking stability and rigidity to the tallest and most pressure sensitive area on the vehicle. Behind the cab, things begin to get interesting with an engine bay roof-top blended into rear kick-up winglets. The rear winglets strike where it gets hot, just behind the engine heat-sink and gives that last bit of downforce area prior to the rear shock tower.
Each P1 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. Performance driven, battle tested – JConcepts is, World Proven Innovation and Design.
Features:
- Original – JConcepts P1 design
- Incredibly low side-pod layout
- Power scoops for added muscle
- Cock-pit “shark fin” for added stability
- Engine bay, roof-top
- Rear winglets for downforce
- Clear polycarbonate with protective film
- Includes window masks and decal sheet
Bearing Kit fits:
- 8ight X
Bearing Kit Includes:
- 6 x 8x14x4 Flanged Revolution Bearings
- 8 x 8x16x5 Revolution Bearings
- 4 x 6x10x3 Revolution Bearings
- 2 x 5x11x4 Revolution Bearings
- 2 x 5x13x4 Revolution Bearings
- 2 x 3/32 X 3/16 X 3/32 Metal Bearings
- 1 x 5x10x4 Metal Clutch Bearings
- 1 x 5x13x4 Metal Clutch Bearings
The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use.
Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!
The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.
The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.
Features:
- Durable, heavy-duty bag material
- Dual handles won't interfere with tires
- Safe, one handed pit operation
- Straps optimized for truggy use
- No fumes in your face
- Compatible with boxes up to 14cm wide x 36.8cm long
- Made in the USA
Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8
NOTE: Truggy in pictures is for display purposes only and is not included.
These can be used in the front or rear.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Yellow wing
- 2x wickerbills
- Required hardware
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x White wing
- 2x wickerbills
- Required hardware
Avid Triad Titanium Wing Screws are a minimal design approach for securing your wing in 10th scale off/on-road applications. The low profile head is only 1.5mm thick instead of our standard Triad Wing Buttons which are 2.25mm. The OD of the button is also reduced to only 12mm from the standard 16mm which allows the Triad Ti Wing Screw to come in at 0.34g/ea which includes the screw where the standard Triad Wing Button comes in at 0.39g/ea not including the screw.
Features:
- Machined from billet 6Al-4V Titanium
- Designed for 10th scale off/on-road applications with a 6mm long screw
- Low profile 1.5mm screw head
- Screw head is only 12mm instead of the standard 16mm
- Broached with a 2mm allen head on outer side for easy installation and removal
- Weighs 0.34g/ea
Package Includes:
- 2x wing screws
- 1x Avid mini-decal
Package Include:
- 340 M3 Screws of various sizes from 6mm to 12mm
- M3 & M4 Washers
- 1 x Handy plastic storage case
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Packet Includes:
- 1 x rear shock shaft
- 1 x piston screw
Packet Includes:
- 1 x front shock shaft
- 1 x piston screw
This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.
Packet includes:
- 1 x 2.2mm front swaybar
- 1 x 2.4mm front swaybar
- 1 x 2.6mm rear swaybar
- 1 x 2.8mm rear swaybar
These buttons are 2.5mm thick, feature several highlight cuts, and have the Avid "A" laser etched on the surface, making them an attractive and practical addition to any kit.
Features:
- Aluminium anodized black with machining highlights and the Avid logo laser etched.
- Designed with strength in mind for 8th scale (2.5mm thick, 16mm OD, and cutouts don't go all the way through).
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market.
- Comes in Black, Blue, Black/Blue, and Black/Gold.
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
- 1