Losi 8ight-XT Standard Parts

This is an Engine Mount Set from Team Losi Racing for their Nitro 8IGHT-X family of racing buggies & truggies.

This is packet of (2) Universal Driveshafts from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

This is an adjustable Aluminium Rear Hinge Pin Brace Set from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is an adjustable Aluminium Front Hinge Pin Brace Set from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a packet of (4) 16mm Shock Nuts & O-rings from Team Losi Racing compatible with all their 16mm Shocks.

This is a packet of (4) Hard Anodized Aluminium Covered 17mm Wheel Nuts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x 1.4 x 5 tapered hole pistons
• 2 x 1.5 x 5 tapered hole pistons

This is packet of (2) Rear Arms with Inserts from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

Includes upgraded metal inserts at pivot points for reduced slop.

This is a packet of (2) 16mm Aluminium Bleeder Shock Caps from Team Losi Racing for their 8IGHT-X and 8IGHT XT racing buggies and truggies.

Packet includes:

• 2 x aluminium bleeder shock caps
• 2 x bleeder screws
• 2 x washers

This is a replacement Fuel Tank from Team Losi Racing for their Nitro 8IGHT-XT racing Truggy.

This is packet of (2) Front Arms with Inserts from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

Includes upgraded metal inserts at pivot points for reduced slop.

This is a packet of (2) 4x66mm Hinge Pins from Team Losi Racing for their 8IGHT-X racing buggies and 8IGHT-XT racing truggies.

This is a replacement Wing Mount Set from Team Losi Racing for their 8IGHT-XT and 8IGHT-XTE racing Truggies.

This is a packet of (4) 16mm 5-hole Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x five 1.4mm hole pistons
• 2 x five 1.5mm hole pistons

The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.  

This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


Packet Includes:

• 2 x 1.3 x 8 hole piston
• 2 x "split" pistons that have four 1.3 holes and four 1.2 holes

This is a packet of (4) Shock Stand Offs from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a packet of (4) Droop Screws from Team Losi Racing suitable for most of their 1/8 buggies and truggies.

These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.

This is an Axle Boot Set from Team Losi Racing suitable for most of their 1/8 buggies and truggies since 4.0.

These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.

Packet includes:

• 4 x axle boots
• 4 x boot retainer rings
• 2x  center driveshaft coupler boots

This is a pair of replacement 17.5° Front Spindle Carriers from Team Losi Racing for their 8IGHT-X racing buggies and 8IGHT-XT racing truggies.

This is a V2 Heavy Duty Differential Case from Team Losi Racing for their 1/8 8IGHT-X / XE Buggy and 8IGHT-XT/XTE Truggy Nitro and Electric 4WD Off-Road racing Kits.

This is replacement rear gearbox and sway bar mounts from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

Packet Includes:

• 1x Rear Gear Box bottom
• 1x Rear Gear Box bottom
• 2x sway bar mounts

This is a Centre rear dogbone from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

This is a Differential Gear & Shaft Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

This packet contains all the gears and pins to rebuild one differential.

This is a packet of (2) Rear Hubs from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a Shock Plastics Set from Team Losi Racing for their 8IGHT-X racing buggies and truggies.

Packet includes:

1. 4 x lower spring retainers
2. 4 x 3.5mm shock ends
3. 4 x 4mm shock ends
4. 4 x lower mounting balls
5. 4 x shock end screws

This is a pair of replacement Front Gearbox Set from Team Losi Racing for their 8IGHT-X racing buggies and truggies.

This is a packet of (4) 1/8 17mm Black Covered Wheel Nuts which will fit most 1/8 scale buggies and truggies.

This is a packet of (4) 6.8mm Suspension Balls from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a packet of (4) 6.8mm Flanged Suspension Balls from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a Center Drive Coupler from Team Losi Racing for their 8ight-X family of buggies and truggies.

This is a packet of (4) King Pin Bolts from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.

This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.


This set includes:

• Four 6x10x3mm bearings

This is a Body Post & Tank Mount Set from Team Losi Racing for their 8IGHT-X range of vehicles.


Used when fitting the Proline Bruggy Body to the TLR 8ight-XT

This is a 3.5mm Rear Shock Shaft from Team Losi Racing for their 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kits.

This is a Clutch Pin and Hardware Set from Team Losi Racing for their 8IGHT-X Buggy and XT Truggy 1/8 Nitro 4WD Off-Road Racing Kits.

This is a packet of (2) Metal Servo Arm Inserts from Team Losi Racing intended for use with Futaba, ProTek R/C, Highest, Savox, and Orion servos, as well as any servo that uses a 25T spline pattern.

These inserts are installed over the steering and throttle servo output shafts.

This is a packet of (4) 16mm Shock Bladders from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm 1.2mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm 1.3mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (2) 16mm Split Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.


These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.

This is a packet of (4) Lower Shock Cap Seals & (8) X-Ring Seals from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.


This set includes:

• Four 8x14x4mm Flanged Bearings

This is a standard replacement Front Spindle Shims from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies .

This is a packet of Differential gaskets and seals from Team Losi Racing for their 8ight range of Buggies and Truggies.

Packet includes:

• 3 x Differential Gaskets
• 6 x Differential outdrive seals

This is a  packet of (12) 6x11x.2mm Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.


This set includes:

• Four 5x11x4mm bearings

This is a Drive Pin Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.

Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.

This is a Differential Case from Team Losi Racing for their 1/8 8IGHT-X / XE Buggy and 8IGHT-XT/XTE Truggy Nitro and Electric 4WD Off-Road racing Kits.

This is a  packet of (20) Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.

This set of Gear Box Shims includes:

• 10 x 14x17x.25mm Shims
• 10 x 14x17x.10mm Shims
  
  

This is a standard replacement Front Bumper from Team Losi Racing for their 8IGHT-X family of racing buggies & truggies..

This is a packet of (4) Pinion Bearing Spacer from Team Losi Racing compatible with their 8ight 4.0 and 8IGHT-X buggies & truggies.

This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.

This is a packet of (8) 16mm Shock Piston Washers from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.

Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.