Kyosho MP10 Nitro Buggy Parts
Kyosho Aluminium Front Knuckle Arm Set: MP10 (KYO KP IF655)
This is a Front Aluminium Knuckle Arm Set from Kyosho for their MP10 1/8 Scale Buggy Kit.
- 1 x left side knuckle
- 1 x right side knuckle
- 4x king pin bushings, and
- 4x mounting screws.
Includes both Left and Right
Kyosho High Quality Clutch Bell (13T) (KYO KP 97035-13)
This is a High Quality 13T Clutch Bell from Kyosho.
Uses (2) 5x10x4 Clutch Bearings
Kyosho Fuel Tank: MP9 & MP10 (KYO KP IF444C)
This is a replacement Fuel Tank from Kyosho for their MP9 & MP10 1/8 Scale Buggy Kits.
Packet includes:
Packet includes:
- 1 x fuel tank
- 4 x rubber grommets
- 1 x factory installed pull handle.
Keep your fuel tank healthy to remain engine tune
Kyosho 1/8 Plastic Wing (Black): MP9 TKI4 (KYO KP IF491BK)
This is the replacement Black Plastic Wing from Kyosho included with the MP9 TKI4 Buggy Kit.
Packet includes:
Packet includes:
- (1) Black Kyosho 1:8 Wing
- (2) Wickerbills
- Wickerbill Hardware (high and low downforce)
2 wickerbills included for high or low downforce
Out of Stock
$29.95 Inc Tax
Kyosho Light Weight Shock Bushings (4): MP7/MP9/MP10/STRR (KYO KP IF346-04L)
This is a packet of Lightweight 7075 Shock Bushings from Kyosho for their MP9 & MP10 1/8 Scale Buggy and ST-RR Truggy Kits.
These Shock Bushings lower the overall weight and center of gravity and are anodized for looks and durability.
These Shock Bushings lower the overall weight and center of gravity and are anodized for looks and durability.
Lower CoG and overall weight on vehicle
Out of Stock
$29.95 Inc Tax
Kyosho 5.8mm Hard Anodized 7075 Aluminum Lower Sway Bar Ball (5) (KYO KP W0201HB)
This is a set of replacement 5.8mm Hard Anodized 7075 Lower Sway Bar Balls from Kyosho.
These are used in the lower ball end of the sway bar ball ends.
Extremely light, these parts lower stiction in the ball end and allow free movement. These parts can also be used to lower overall weight on all Inferno kits.
These are used in the lower ball end of the sway bar ball ends.
Extremely light, these parts lower stiction in the ball end and allow free movement. These parts can also be used to lower overall weight on all Inferno kits.
Light and strong
Kyosho Carbon Clutch Shoes (3) (KYO KP IFW052)
This is a packet of (3) Carbon Clutch Shoes from Kyosho designed to fit all thier 1/8 off road vehicles, and can be found on select DBX vehicles as well.
These shoes last a long time, and you can fine tune the way the clutch engages by trimming about 1-2mm of the end of the clutch shoes, or by using different clutch springs.
Package includes:
These shoes last a long time, and you can fine tune the way the clutch engages by trimming about 1-2mm of the end of the clutch shoes, or by using different clutch springs.
Package includes:
- 3 x clutch shoes
- 1 x washer
Long lasting shoes for 3 shoe clutch
Kyosho 5x10 metal shielded clutch bearings (4) (KYO KP BRG001)
This is a packet of (4) 5x10 metal shielded clutch bearings from Kyosho included in most of their nitro powered kit.
Very common Nitro clutch bearings
Kyosho Differential Bevel Gear Set: MP9 & MP10 (KYO KP IF402)
This is a packet of Differential Bevel Gear Set from Kyosho for their MP9 & MP10 1/8 Scale Buggy Kits.
Packet includes:
Packet includes:
- 2 x sun gears
- 4 x planetary gears
- 4 x washers
- 2 x cross pins
Keep differential operating smooth
Kyosho 5x7mm Clutch Shims (30) (KYO KP 96643)
This is a packet of (30) 5x7mm shims from Kyosho used for shimming the clutch bell bearings, and can be used with any brand of clutch system.
Packet includes:
Packet includes:
- 10 x 5x7x0.1mm shims
- 10 x 5x7x0.2mm shims
- 10 x 5x7x0.3mm shims
Includes 0.1mm, 0.2mm & 0.3mm shims
Out of Stock
$13.95 Inc Tax
Avid Racing Concepts Spring Tube Pack (8th Off-Road) (4) (AVD AV1203-TUBE)
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
Keep your 1/8 springs safe and tidy
Kyosho 2.6x17mm Wheel Pins (4): MP9/MP10/ST-RR (KYO KP IF110)
This is a packet of (4) 2.6x17mm Wheel Pins from Kyosho for their MP9 & MP10 1/8 Scale Buggy and ST-RR Truggy Kits.
Pin to attach the wheel hubs
- 1