Kyosho MP7.5 Nitro Buggy Parts
Kyosho Aluminium Front Hub Carrier Set: MP7.5/IGT/IGT2 (KYO KP IGW001)
This is an Aluminium Front Hub Carrier Set from Kyosho to fit their 7.5, GT and GT2 vehicles, as well as any vehicle that is compatible with the KYOIF145 front hub carriers..
Improve looks and strength to your Inferno GT
Kyosho 5.8mm Hard Anodized 7075 Aluminum Lower Sway Bar Ball (5) (KYO KP W0201HB)
This is a set of replacement 5.8mm Hard Anodized 7075 Lower Sway Bar Balls from Kyosho.
These are used in the lower ball end of the sway bar ball ends.
Extremely light, these parts lower stiction in the ball end and allow free movement. These parts can also be used to lower overall weight on all Inferno kits.
These are used in the lower ball end of the sway bar ball ends.
Extremely light, these parts lower stiction in the ball end and allow free movement. These parts can also be used to lower overall weight on all Inferno kits.
Light and strong
Kyosho Ball Ends (5.8mm) (Hard) (12) (KYO KP LA043H)
This is a Packet of (12) 5.8mm Hard Ball Ends from Kyosho.
Fits many models, check manual first
Out of Stock
$13.95 Inc Tax
Kyosho Ball Ends (5.8mm) (8) (KYO KP 1295)
This is a Packet of ((8) 5.8mm Ball Ends from Kyosho.
Fits many models, check manual first
Out of Stock
$7.95 Inc Tax
Kyosho 20 Degree Front Hub Carriers: MP7.5 (KYO KP IFW138)
This is a packet of (2) 20 Degree Front Hub Carriers from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
For early 1/8 Nitro Inferno MP7.5 racer
Kyosho Front Torque Rod: MP7.5 (KYO KP IFW112)
This is a Front Torque Rod from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
For early 1/8 Nitro Inferno MP7.5 racer
Avid Racing Concepts Spring Tube Pack (8th Off-Road) (4) (AVD AV1203-TUBE)
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
Keep your 1/8 springs safe and tidy
Kyosho 1/8 Front Bumper (KYO KP IF127)
This is a 1/8 Front Bumper from Kyosho for their older 1/8 buggies and truggies.
Fit a number of older 1/8 vehicles
- 1