1/8 4wd SWORKz S35-4 Buggy Parts

Sort By:  
Fits Buggy and Truggy
Out of Stock
$79.95  Inc Tax
Fits both buggy and truggy
$39.95  Inc Tax
Includes 0.5mm and 1mm spacers
$36.00  Inc Tax
May fit other buggies
Out of Stock
$27.95  Inc Tax
Fits both Nitro and EP buggies
Out of Stock
$27.95  Inc Tax
Fits both buggy and truggy
$23.95  Inc Tax
Fits both Nitro and EP buggies
Out of Stock
$23.00  Inc Tax
Also comes in other compounds
$21.95  Inc Tax
Fits Buggy and Truggy
Out of Stock
$21.95  Inc Tax
Fits both buggy and truggy
Out of Stock
$19.95  Inc Tax
Fits 5x13x4mm ball bearings
Out of Stock
$17.95  Inc Tax
Use to tune your SWORKz buggy
$17.95  Inc Tax
Fits both buggy and truggy
$17.95  Inc Tax
Fits Buggy and Truggy
Out of Stock
$17.95  Inc Tax
Also comes in other compounds
$13.95  Inc Tax
Fits both buggy and truggy
$12.95  Inc Tax
Also comes in other compounds
Out of Stock
$9.95  Inc Tax
Fits both buggy and truggy
$9.95  Inc Tax
Fits both buggy and truggy
Out of Stock
$7.95  Inc Tax
May fit other buggies
Out of Stock
$5.95  Inc Tax
SWORKz 1/8 Rear Chassis Balance weight (15g) (2): S35-4 Series (SW-330168A)
This is a packet of (2) 15g Rear Chassis Balance weights from SWORKz for their S35-4 Series 1/8 scale off-road buggies and Truggies. 
 


 



Fits Buggy and Truggy
Out of Stock
$79.95  Inc Tax
SWORKz Uni-Design Aluminum Throttle Servo Horn 25T (SW-338079-25)
This is a 25 tooth Nitro Series Aluminum Throttle Servo Horn from SWORKz for their S35-3 and 4 Series 1/8 scale Nitro off-road Buggies and Truggies. 


Fits both buggy and truggy
$39.95  Inc Tax
Avid Racing Concepts 8th Hex Track Width Spacers: Carbon Set (AVD AV1049-17-SET)
This is a set of 0.5mm and 1mm Hex Track Width Spacers by Avid RC for tuning 1/8th vehicles.

The Avid 8th Hex Track Width Spacers (17mm) are a great way to adjust the width on any 8th scale buggy or truggy without having to change out your hubs. Typically this will help stabilize a vehicle by increasing track width and scrub.

Details / Tips

  • Includes (5) 0.5mm and (5) 1.0mm Carbon Fiber 17mm Spacers, doodad container, and an Avid mini decal.
  • To install it is usually best to put them in your wheel first before putting on to the car. Just remember there are in there when you take them off! This is why we included an extra one in this pack because they like to float away like a snowflake.

NOTICE: You may need to lightly ream out the center of the 0.5mm shims to get the burrs off to fit on some axles.




Includes 0.5mm and 1mm spacers
$36.00  Inc Tax
SWORKz Shock End/Body Mount/Ball Ends Set (2): S35-4 / S35-T (SW-228006)
This is a packet of Shock Ende, Body Mounts and Ball Ends from SWORKz for their S35-4 Series 1/8 scale off-road Buggies and Truggies. 
 


 



includes 2 sets
$35.95  Inc Tax
SWORKz Aluminum Wing Washers (Gunmetal) (2): S35-3/4 (SW-330424GM)
This is a packet (2) Gunmetal Aluminum Wing Holder from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
May fit other buggies
Out of Stock
$27.95  Inc Tax
SWORKz Uni-Design Aluminum Steering Servo Horn 25T (SW-338078-25)
This is a 25 tooth Aluminum Steering Servo Horn from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 


Fits both Nitro and EP buggies
Out of Stock
$27.95  Inc Tax
SWORKz Knuckle Pivot Ball Nut (4): S35-3/4 (SW-330118A)
This is a packet of (4) Knuckle Pivot Ball Nuts from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 
Fits both buggy and truggy
$23.95  Inc Tax
ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T) (PTK-7825)
This is Dual Offset Heavy Duty Clamping Servo Horn from ProTek R/C which features a dual offset allowing you to choose the best offset for your setup. 

The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one standard length servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.


Features:
  • Clamp design
  • 20mm & 16.0mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
  • 4.0mm thick arm
  • 33mm Overall End to End length
  • Linkage holes threaded for 3mm hardware
  • 25T Spline Futaba/Savox/ProTek Output Shaft

Fits both Nitro and EP buggies
Out of Stock
$23.00  Inc Tax
SWORKz 1/8 Rear Lower Arm (Hard) (1): S35-4 Series (SW-228015H)
This is a Rear Lower Arm in Hard material from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



Also comes in other compounds
$21.95  Inc Tax
SWORKz 1/8 Front Bumper (2): S35-4 Series (SW-2501097B)
This is a packet of (2) Bumpers from SWORKz for their S35-4 Series 1/8 scale off-road buggies and Truggies. 
 


 



Fits Buggy and Truggy
Out of Stock
$21.95  Inc Tax
SWORKz 1/8 BBS System Teflon Coated Durable Shock Shaft (L) (2): S35-4 Series (SW-338062)
This is a packet of (2) Long BBS System Teflon Coated Durable Shock Shaft from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



Fits Buggy Rear shocks
$21.95  Inc Tax
SWORKz Lower Arm Hinge Pin (68.5mm) (2): S35-3/4 (SW-338056)
This is a packet of two 68.5mm Lower Arm Hinge Pin from SWORKz for the front and rear of their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 

 
Fits both buggy and truggy
Out of Stock
$19.95  Inc Tax
SWORKz 1/8 BBS System Teflon Coated Durable Shock Shaft (S) (2): S35-4 Series (SW-338063A)
This is a packet of (2) Short BBS System Teflon Coated Durable Shock Shaft from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



Fits Buggy front shocks
$19.95  Inc Tax
SWORKz Gear Box Set: S35-3/4/GT (SW-2503261A)
This is a Gear Box Set from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 
This gear box set has been upgraded to fit 5x13x4mm ball bearings which can handle higher RPMs and create less temperature. 

The drivetrain remains smooth over longer runtimes.
 



Fits 5x13x4mm ball bearings
Out of Stock
$17.95  Inc Tax
SWORKz Front Sway Bar 2.2mm: S35-3/4 Buggy (SW-115035A)
This is a 2.2mm Front Sway Bar from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies.  





Use to tune your SWORKz buggy
$17.95  Inc Tax
SWORKz Nitro Series Pipe Spring Lock: S35-3/4 (SW-338036)
This is a Nitro Series Pipe Spring Lock from SWORKz for their S35-3 and 4 Series 1/8 scale Nitro off-road Buggies and Truggies. 
Fits both buggy and truggy
$17.95  Inc Tax
SWORKz 1/8 BBS System Shock Piston 1.4 mm x 6 Holes (2): S35-4 Series (SW-330563)
This is a packet of (2) BBS System Shock Piston 1.4mm x 6 Holes from SWORKz for their S35-4 Series 1/8 scale off-road buggies and Truggies. 
 


 



Fits Buggy and Truggy
Out of Stock
$17.95  Inc Tax
SWORKz 1/8 Front Lower Arm (Hard) (1): S35-4 Series (SW-228005H-F)
This is a Front Lower Arm in Hard material from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



Also comes in other compounds
$13.95  Inc Tax
SWORKz Front Steering Knuckle Set (Type 2.0): S35-3/4 (SW-2503264A)
This is a version 2 Front Steering Knuckle Set from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 

 
Fits both buggy and truggy
$12.95  Inc Tax
SWORKz 1/8 Front Upper Arm (1): S35-4 Series (SW-2503270-01)
This is a Front Upper Arm from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



Also comes in other compounds
Out of Stock
$9.95  Inc Tax
SWORKz Optional Air Filter Extension Adapter S35-3/4 (SW-420026)
This is an Optional Air Filter Extension Adapter from SWORKz for their S35-3 and 4 Series 1/8 scale Nitro off-road Buggies and Truggies. 
Fits both buggy and truggy
$9.95  Inc Tax
SWORKz Center Big Bore Plastic Differential Paper Gaskets (3): S35-3/4 (SW-610020P)
This is a packet (3) Center Big Bore Plastic Differential Paper Gaskets from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 

Fits both buggy and truggy
$7.95  Inc Tax
SWORKz Front/Rear Differential Paper Gaskets (3): S35-3/4 (SW-610023P)
This is a packet (3) Front/Rear Differential Paper Gaskets from SWORKz for their S35-3 and 4 Series 1/8 scale off-road Buggies and Truggies. 
 

Fits both buggy and truggy
Out of Stock
$7.95  Inc Tax
SWORKz 1/8 Plastic Arm Inserts Set: S35-4 Series (SW-2503260-02)
This is a Plastic Arm Inserts Set from SWORKz for their S35-4 Series 1/8 scale off-road buggies. 
 


 



May fit other buggies
Out of Stock
$5.95  Inc Tax
Per Page      1 - 24 of 24
  • 1