Tamiya M-07 Parts

Sort By:  
Tamiya Race Factory Dampers
$155.00  Inc Tax
Fits all M-Chassis kits
$125.00  Inc Tax
Official Spec motor for a number of NZRCA classes
Out of Stock
$120.00  Inc Tax
ideally suited to off-road cars
Out of Stock
$64.95  Inc Tax
Produces excellent torque
$59.95  Inc Tax
Great for M-Chassis class racing
Out of Stock
$49.95  Inc Tax
for direct drive F1 kits
$49.95  Inc Tax
Good upgrade from standard kit motors
$39.95  Inc Tax
Good upgrade from standard kit motors
$34.95  Inc Tax
Supplied with most Tamiya RC Kits
$34.95  Inc Tax
M-07 Front & Rear Stabilizer Set
$32.50  Inc Tax
Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
M-07 Main Chassis Section
$29.95  Inc Tax
Reduce the rotating mass of your drivetrain
$29.95  Inc Tax
Includes a handy plastic storage case
Out of Stock
$27.50  Inc Tax
Perfect for building Tamiya RC Models
$19.95  Inc Tax
Reduce weight and look great
Out of Stock
$19.95  Inc Tax
Reduce weight and look great
Out of Stock
$19.95  Inc Tax
Add some bling to toolbox
Out of Stock
$19.50  Inc Tax
M-07 Chassis Parts
Out of Stock
$17.95  Inc Tax
A must for any Tamiya Enthusiast
$17.95  Inc Tax
Add some bling to your ride
$15.50  Inc Tax
Great for M-Chassis class racing
Out of Stock
$12.50  Inc Tax
Great for M-Chassis class racing
Out of Stock
$12.50  Inc Tax
Includes enough for 5 motors
$9.95  Inc Tax
M-07 Spur Gear and Counter Gear
$7.50  Inc Tax
Strengthen your 1/10 On-Road Body
$5.00  Inc Tax
$10.00
Tamiya TRF Special Damper Set (4) (TAM 42102)
This is a set of (4) Special TRF Dampers from Tamiya.

R/C world champion team TRF will never rest in its pursuit of excellence. Knowledge is power, and the knowledge and experience of the Tamiya racing factory team will give you the power to win!


★These dampers feature a hard cylinder interior coating even more advanced than that on Item 53571 TRF Dampers (Fluorine Coated).
★This coating on the heat-treated surface enables over 14% less static and kinetic friction values.
★Cylinder cap, spring adjuster and O-ring cap parts have a blue anodized finish.

XV-01 PRO Chassis / TA07 PRO Chassis / TA06 PRO Chassis / TA06 MS Chassis / FF-04 EVO Chassis / FF-03 PRO Chassis / TB-03 VDS Chassis / TB-04 PRO Chassis / TB-05 PRO Chassis: Kit standard
M-08 CONCEPT Chassis: Use with TAM54909



Tamiya Race Factory Dampers
$155.00  Inc Tax
Tamiya Aluminium Damper Set (4): M-Chassis (TAM 54000)
This is Aluminium Damper Set from Tamiya for their chassis.

★These high-performance oil dampers were designed with M-Chassis models in mind.
★Aluminum cylinders feature a slick black coating on their mirror-surface interior.
★Fluorine resin 2- and 3-hole pistons are included.
★Soft silicone O-rings and fluorine resin spacers minimize oil leakage.
★Resin spring retainers allow setting of spring length.
★Comes with 3 hardnesses of spring.



Fits all M-Chassis kits
$125.00  Inc Tax
Hobbywing 30408011 XERUN Justock 3650SD G2.1 17.5t (HBW 30408011)
This is the JUSTOCK 3650SD 17.5T-BLACK-G2.1 Sensored Brushless Motor from Hobbywing.

This motor is the spec motor for the following NZRCA spec racing classes:
  • TAMIYA M-CHASSIS
  • TCR FWD

Features:
  • Fixed timing motor for spec racing
  • Compliant with ROAR and IFMAR rules
  • The use of a heat-resistant magnet attached aluminium case and double insulated windings, high precision bearings, and rotor with a strong structure guarantee outstanding performance and super durability.
  • The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantee the user a smooth and linear power on demand.
  • The silicone O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
  • The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
  • Perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
  • Battery: 2S-3S LiPo
  • 2 POLE
  • 1/10 ,1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck /Truck) STOCK / SPORT Race (choose the motor base on competition rules.).

Specifications:
  • Scale: 1/10, 1/12
  • Brushless: Yes
  • Sensored: Yes
  • Pole count: 2
  • KV / Turn: 2450kv / 17.5T
  • LiPo Cells: 2-3S
  • Current w/o Load Amp: 3.5A
  • Weight: 176g
  • Size:
    • Can: Outer diameter 35.9mm / (L): 52.5mm
    • Shaft: diameter 3.17mm / (L) Projecting part: 15mm
  • Rotor: ∅7-12.3-U
Official Spec motor for a number of NZRCA classes
Out of Stock
$120.00  Inc Tax
Tamiya 23T Brushed 540 Super Stock Motor Type-BZ (TAM 53930)
This is a 23T Brushed 540 Super Stock Motor Type-BZ from Tamiya ideally suited to their 1/10 Off-road RC kits.


Features include:
  • This versatile motor features torque ideally suited to off-road cars.
  • It utilizes brush damper, terminal heat sink, and chip condenser components.
  • A sponge cover is included to protect the motor.
  • The gun metal color can has slits to help heat dissipate.
  • Features a blue anodized end bell.
  • Input voltage: 7.2V
  • RPM (without load): 26,500
  • Maximum torque: 49mN-m (7.2V)
  • Use ball bearings when installing this motor.
  • XV-01 series chassis will require motor extension cables.
        


ideally suited to off-road cars
Out of Stock
$64.95  Inc Tax
Tamiya 23T Brushed 540 Super Stock Motor Type-TZ (TAM 53696)
This is a 23T Brushed 540 Super Stock Motor Type-TZ from Tamiya which produces excellent torque, making it well-suited to low speed circuits or for endurance racing.

Features include:
  • Input voltage: 7.2-8.4V
  • RPM (without load): 26,500
  • Maximum torque: 500gf-cm (at 7.2V)
  • 23T




Produces excellent torque
$59.95  Inc Tax
Ride RC 1/10 M-Chassis 60A belted tires with LT inners Tires (4) (M-Chassis) (RRC 24405)
This is a packet of (4) 60A belted tires with LT inners from Ride RC for M-Chassis.

Great for M-Chassis class racing
Out of Stock
$49.95  Inc Tax
Tamiya 32T Brushed 540 Formula Tuned Motor (TAM 54176)
This is a 32T Brushed 540 high performance electric motor from Tamiya with replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor cooling and incorporates a detachable inboard capacitor.

• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).

Features include:
  • Input voltage: 7.2-8.4V
  • RPM (without load): 14,000
  • Maximum torque: 39mN/m of torque (at 7.2V)
  • 32T



for direct drive F1 kits
$49.95  Inc Tax
Tamiya 23T Brushed RS-540 Sport Tuned Motor (TAM 53068)
This is a 23T Brushed RS-540 Sport Tuned Motor from Tamiya.

The Tamiya RS-540 sport tuned motor is an economical high performance motor for on-road and off-road vehicles.

It will work in many Tamiya vehicles (check instruction manual for applications.)

                                                                               
Specifications:
Usable Voltage:  6-8.4V (5-7 cells)                                           
RPM at Best Efficiency: 18,300 RPM (7.2v)                       
Torque at Best Efficiency: 350g/cm (7.2v)   
peak rpm: 21,000
Current drain at best efficiency: 12A (7.2v)

Peak Current Draw: 50+A





Good upgrade from standard kit motors
$39.95  Inc Tax
Tamiya 25T Brushed RS-540 Torque Tuned Motor (TAM 54358)
This is a 25T Brushed RS-540 Torque Tuned Motor from Tamiya, which offers performance that is between that of a standard Type 540 27T motor and the Sport-Tuned 23T Motor.

Compared to a standard Type 540 motor, it offers a higher top speed and improved acceleration when used with RC car models with standard gear ratios.

It will work in many Tamiya vehicles (check instruction manual for applications.)

                                                                               
Specifications:
Usable Voltage:  6.6-7.2V                                           
RPM at Best Efficiency: 16,000 RPM (7.2v)                       
Torque at Best Efficiency: 305g/cm (7.2v)   
Current drain at best efficiency: 10A (7.2v)



Good upgrade from standard kit motors
$34.95  Inc Tax
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.

These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.  

                                                                               
Supplied with most Tamiya RC Kits
$34.95  Inc Tax
Tamiya Stabilizer (Front & Rear) Set: M-07 Concept (TAM 54757)
This is the Front & Rear Stabilizer Set from Tamiya for their M-07 Concept Chassis.
M-07 Front & Rear Stabilizer Set
$32.50  Inc Tax
Ride RC 1/10 M-Chassis MT33R Mid Temp High Grip Tires with LT inners (2) (RRC 24402)
This is a packet of (2) MT33R Mid Temp High Grip Tires with LT inners from Ride RC for M-Chassis.


Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
Ride RC 1/10 M-Chassis MT30R Mid-Low Temp High Grip with LT inners Tires (2) (RRC 24403)
This is a packet of (2) MT30R Mid-Low Temp High Grip Tires with LT inners from Ride RC for M-Chassis.


Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
Ride RC 1/10 M-Chassis MT36R Hi-Mid Temp High Grip Tires with LT inners (2) (RRC 24401)
This is a packet of (2) MT36R Hi-Mid Temp High Grip Tires with LT inners from Ride RC for M-Chassis.


Great for M-Chassis class racing
Out of Stock
$32.50  Inc Tax
Tamiya Lower Deck: M-07 Concept (TAM 51600)
This is the Lower Deck (Main Chassis Section) from Tamiya for their M-07 Concept Chassis.
M-07 Main Chassis Section
$29.95  Inc Tax
Tamiya 33mm Lightweight Aluminium Swing Shafts (2): M-07 & M-08 (TAM 54969)
This is a packet of (2) Lightweight Aluminium Swing Shafts from Tamiya for their M-07 & M-08 kits.

These lightweight aluminium swing shafts have drive pin and cross joint apart by 90 degrees to ensure smoother power.

They also realize a weight savings of around a half.

Components have a stylish blue anodized finish. 


Compatible Chassis
M-07 Concept & M-08 Concept Chassis




Reduce the rotating mass of your drivetrain
$29.95  Inc Tax
Metric M3 Screw and Washers Set (340 pieces) (SCREWBOX-SML)
This is a 340 piece Metric M3 Screw and Washers Set


Package Include:
  • 340 M3 Screws of various sizes from 6mm to 12mm
  • M3 & M4 Washers
  • 1 x Handy plastic storage case

Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.

Compatible with:

Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Includes a handy plastic storage case
Out of Stock
$27.50  Inc Tax
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.

This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.

An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.

  • Precision tooled magnetic bit
  • For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
  • Bit diameter/length: 4mm / 100mm
  • Grip diameter/length: 28mm / 98mm
.
Perfect for building Tamiya RC Models
$19.95  Inc Tax
Tamiya 5X5mm Aluminium Ball Connector (5) (TAM 53906)
This is the packet of (5) 5x5mm blue anodised aluminium Ball Connectors from Tamiya for almost all of their vehicles.

Use to adjust position of upper arm on competition-ready R/C chassis.





Reduce weight and look great
Out of Stock
$19.95  Inc Tax
Tamiya Aluminium Servo Step Screws (4) (Blue) (TAM 54862)
This is the packet of (4) Blue Anodised Aluminium Servo Step Screws from Tamiya for almost all of their vehicles.


Securely attach your servos and add some colour with these blue Aluminum step screws.
  • Aluminum Step Screws x4
  • Step screws cater to holes between 4.5mm and 5mm, and do not require washers, meaning that they give a great fit and save maintenance time.
  • Hex holes ensure tight attachment.
  • Some servos may only require 2 screws.




Reduce weight and look great
Out of Stock
$19.95  Inc Tax
Tamiya Anodised Turnbuckle Wrench (Blue) (TAM 53602)
This is the Blue Anodised Turnbuckle Wrench from Tamiya for almost all of their vehicles.


This is a dedicated, compact tool for the adjustment of your turnbuckle shafts. Features just the right thickness of material for easy adjusting. Has a stylish blue anodized finish.




Add some bling to toolbox
Out of Stock
$19.50  Inc Tax
Tamiya "K" Parts (Stiffener): M-07 Concept (TAM 51599)
This is the "K"Parts (Chassis Stiffener) from Tamiya for their M-07 Concept Chassis.
M-07 Chassis Parts
Out of Stock
$17.95  Inc Tax
Tamiya "A" Parts (Body Mounts): M-07 Concept (TAM 51595)
This is the "A" Parts (Body mounts) from Tamiya for their M-07 Concept Chassis.
M-07 Body Mounts
$17.95  Inc Tax
Tamiya Philips (+) Screwdriver Pro (Medium) (TAM 74119)
This is a Medium Philips (+) Screwdriver Pro from Tamiya.

This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.

An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.

  • Precision tooled magnetic bit
  • For use with PH1 (2-2.6mm; JIS M2-M2.6) plus (+) head screws.
  • Bit diameter/length: 4mm / 100mm
  • Grip diameter/length: 26mm / 83mm
.
A must for any Tamiya Enthusiast
$17.95  Inc Tax
Tamiya "B" Parts (Bumpers): M-07 Concept (TAM 51596)
This is the "b"Parts (Bumpers) from Tamiya for their M-07 Concept Chassis.
M-07 Bumpers
$15.95  Inc Tax
Tamiya Stabilizer Rod Stopper (4) (TAM 53827)
This is a packet of (4) Stabilizer Rod Stoppers from Tamiya.


★ Get maximum efficiency from your stabilizers with these rod stoppers to ensure that they are snugly attached.
★ Stylish blue anodized parts will add a classy accent to your car.
★ Set includes four rod stoppers and four grub screws.



TA06 Chassis / TA06 PRO Chassis / TA06 MS Chassis / TB-04 Chassis / TB-04 PRO Chassis: Use with TAM54309.
FF-03 Chassis / FF-03 PRO Chassis: Use with TAM54230.
TB-03 Chassis / TB-03 VDS Chassis / TA05 ver.Ⅱ Chassis: Use with TAM53842.
M-07 CONCEPT Chassis / M-08 CONCEPT Chassis: Use with TAM54757.
TRF502X Chassis / DB02 Chassis: Use with TAM53963.


Add some bling to your ride
$15.50  Inc Tax
Tamiya "D" Parts (Suspension Arms): M-07 Concept (TAM 51598)
This is the "D"Parts (Suspension Arms) from Tamiya for their M-07 Concept Chassis.
M-07 Suspension Arms
$14.95  Inc Tax
Tamiya "C" Parts (Uprights): M-07 Concept (TAM 51597)
This is the "C" Parts (Uprights) from Tamiya for their M-07 Concept Chassis.
M-07 Uprights
$14.95  Inc Tax
Ride RC 1/10 M-Chassis 60 size wheels (2) (Black) (RRC 25402)
This is a packet of (2) 1/10 M-Chassis 60 size 10-spoke Black wheels from Ride RC.



Great for M-Chassis class racing
Out of Stock
$12.50  Inc Tax
Ride RC 1/10 M-Chassis 60 size wheels (2) (White) (RRC 25401)
This is a packet of (2) 1/10 M-Chassis 60 size 10-spoke White wheels from Ride RC.



Great for M-Chassis class racing
Out of Stock
$12.50  Inc Tax
Tamiya Motor Connector Plugs (10) (TAM 50245)

This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor. 

This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.

The connectors in this set can be used to replace worn out connectors.

Key Features:

  • For: 540 Brushed Motor
  • Material: Metal / Rubber
  • Color: Silver

What's In The Box?

  • 10 Male connectors
  • 10 Male rubber boots
  • 10 Female connectors
  • 10 Female rubber boots






Includes enough for 5 motors
$9.95  Inc Tax
Tamiya Spur Gear and Counter Gear: M-07 Concept (TAM 51601)
This is the Spur Gear and Counter Gear from Tamiya for their M-07 Concept Chassis.
M-07 Spur Gear and Counter Gear
$7.50  Inc Tax
Yeah Racing Carbon Body Wing Protector (2) (YR YA-0278G)
This is a packet of (2) carbon fibre plates designed to protect the body of 1/10 touring car where the rear wing mounts

Features:
    1. For: On Road Cars
    2. Color: carbon fibre
Strengthen your 1/10 On-Road Body
$5.00  Inc Tax
$10.00
Per Page      1 - 33 of 33
  • 1