Standard Bearings
Team Losi 8x14x4mm Rubber Sealed Ball Bearing (4) (LOSA6945)
This is a packet of (4) 8mm x 14mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm bearings
Four 8x14x4mm bearings
Out of Stock
$30.95 Inc Tax
Team Losi 8 x 12 x 3.5mm Ball Bearing, Flanged, Rubber (2): PM-MX (LOS267000)
This is a packet of two 8 x 12 x 3.5mm Flanged Ball Bearings, (Rubber) from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
For the awesome Promoto MX
Out of Stock
$23.95 Inc Tax
Team Losi 8x16x5mm Rubber Sealed Ball Bearing (4) (LOSA6942)
This is a packet of (4) 8mm x 16mm x 5mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x16x5mm bearings
Four 8x16x5mm bearings
Team Losi 7 x 14 x 5mm Ball Bearing, Rubber (2): PM-MX (LOS267002)
This is a packet of two 7 x 14 x 5mm Ball Bearings, (Rubber) from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
For the awesome Promoto MX
Out of Stock
$20.95 Inc Tax
Team Losi 4 x 8 x 3mm Bushing, Oil-Embedded (6): PM-MX (LOS267001)
This is a packet of two 4 x 10 x 4mm Ball Bearings, (Rubber) from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
For the awesome Promoto MX
Out of Stock
$19.95 Inc Tax
Team Losi 6x12mm Sealed Ball Bearing (4) (LOSA6940)
This is a packet of (4) 6x12mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 6x12mm bearings
Four 6x12mm bearings
Out of Stock
$19.95 Inc Tax
Team Losi 6x10x3mm Rubber Sealed Ball Bearing (4) (LOSA6946)
This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.
This set includes:
This set includes:
- Four 6x10x3mm bearings
Four 6x10x3mm bearings
Team Losi Heavy Duty Clutch Bearings (2) (5x10mm) (LOSA6954)
This is a packet of (2) optional Losi 5x10mm Heavy Duty Clutch Bearings from Team Losi Racing intended for use with their 1/8 scale 8ight buggy and truggy.
Can also be used in other clutches that use 5x10x4mm Bearings.
(5x10x4mm) (Heavy Duty)
Team Losi Heavy Duty Clutch Bearings (2) (5x13mm) (LOSA6955)
This is a packet of (2) optional Losi 5x13mm Heavy Duty Clutch Bearings from Team Losi Racing intended for use with their 1/8 scale 8ight buggy and truggy.
(5x13x4mm) (Heavy Duty)
Out of Stock
$14.95 Inc Tax
Team Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing (4) (LOSA6948)
This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm Flanged Bearings
Four 8x14x4mm flanged bearings
Out of Stock
$13.50 Inc Tax
$22.00
Team Losi 5x11x4mm Rubber Sealed Ball Bearing (4) (LOSA6947)
This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 5x11x4mm bearings
Four 5x11x4mm bearings
Arrowmax Clutch Bearings (2) (5x10mm) (AM-200105)
This is a packet of (2) 5x10x4mm clutch bearings from Arrowmax.
(5x10x4mm)
Out of Stock
$11.95 Inc Tax
AVID Racing Concepts Bearing (5x8x2.5mm) (Ceramic) (AVD AVMR85ZZC)
This is a single 5x8x2.5 Ceramic Metal bearing from AVID Racing Concepts.
The 5x8x2.5 Ceramic Metal bearing (MR85ZZC) is a high quality steel/chrome bearing with metal shields and silicone nitride ceramic balls (Si3N4).
Check your manual for the correct size for your vehicle if you are not certain.
The 5x8x2.5 Ceramic Metal bearing (MR85ZZC) is a high quality steel/chrome bearing with metal shields and silicone nitride ceramic balls (Si3N4).
Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x8mm (Outer) x2.5mm (Width)
2x Metal Seals
Out of Stock
$10.00 Inc Tax
Team Losi Racing 5x8x2.5mm Bearings (2) (TLR237000)
This is a packet of (2) replacement 5x8x2.5mm Bearings from Team Losi Racing and are intended for use with their 22 line of 1/10 scale vehicles, as well as the XXX line of 1/10 scale vehicles.
These bearings are used in the ball differential.
These bearings are used in the ball differential.
Common bearing used in TLR ball differential.
AVID Racing Concepts "Revolution" Bearing (5x10x4mm) (AVD AVMR105-RSZ)
This is a single 5x10x4mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x10x4mm Revolution bearing by Avid Racing Concepts is the standard bearing for 1/8th nitro clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x10x4mm Revolution bearing by Avid Racing Concepts is the standard bearing for 1/8th nitro clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x10mm (Outer) x4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (5x11x4mm) (AVD AVMR115-RSZ)
This is a single 5x11x4mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x11x4 Revolution bearing by Avid Racing Concepts is the standard bearing for Traxxas Revo clutch and many more. Check your manual for the correct size for your vehicle if you are not certain.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x11x4 Revolution bearing by Avid Racing Concepts is the standard bearing for Traxxas Revo clutch and many more. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x11mm (Outer) x4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (5x13x4mm) (AVD AVMR695-RSZ)
This is a single 5x13x4mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
>But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x13x4 Revolution bearing by Avid Racing Concepts is a popular bearing for Losi 8ight, Serpent, and Agama clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
>But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
5x13x4 Revolution bearing by Avid Racing Concepts is a popular bearing for Losi 8ight, Serpent, and Agama clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x 13mm (Outer) x 4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (5x8x2.5mm) (AVD AVMR85-RSZ)
This is a single 5x8x2.5mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
Check your manual for the correct size for your vehicle if you are not certain.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x8mm (Outer) x2.5mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (1/2 x 3/4 x 5/32) (AVD AVR1212-RSZ)
This is a single 1/2 x 3/4 x 5/32 Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
1/2 x 3/4 x 5/32 Revolution bearing by Avid Racing Concepts is the standard Inner bearing for 1/8 Losi Axles. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
1/2 x 3/4 x 5/32 Revolution bearing by Avid Racing Concepts is the standard Inner bearing for 1/8 Losi Axles. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- STANDARD:0.5" (Inner) x0.75" (Outer) x0.15625" (Width)
- FRACTION:1/2" (Inner) x3/4" (Outer) x5/32" (Width)
- METRIC:12.7mm (Inner) x19.05mm (Outer) x3.96875mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (8x16x5mm) (AVD AV688-RSZ)
This is a single 8x16x5mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x16x5 Revolution bearing by Avid Racing Concepts is the standard bearing for the Kyosho MP series, Mugen MBX series, Xray XB8, Thunder Tiger, Ofna Hyper 7, HPI Savage, and many more..
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x16x5 Revolution bearing by Avid Racing Concepts is the standard bearing for the Kyosho MP series, Mugen MBX series, Xray XB8, Thunder Tiger, Ofna Hyper 7, HPI Savage, and many more..
Bearing Dimensions:
- METRIC:8mm (Inner) x16mm (Outer) x5mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (8x14x4mm) (AVD AVMR148-RSZ)
This is a single 8x14x4mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x14x4 Revolution bearing by Avid Racing Concepts is the standard outer bearing for the Losi 8ight up to version 3.0; (4.0 uses an 8x16x4 Bearing). Check your manual for the correct size for your vehicle.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x14x4 Revolution bearing by Avid Racing Concepts is the standard outer bearing for the Losi 8ight up to version 3.0; (4.0 uses an 8x16x4 Bearing). Check your manual for the correct size for your vehicle.
Bearing Dimensions:
- 8mm (Inner) x14mm (Outer) x4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Revolution" Bearing (8x14x4mm) ( Flanged ) (AVD AVMF148-RSZ)
This is a single 8x14x4mm Flanged Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x14x4 Revolution Flanged bearing by Avid Racing Concepts is the standard diff outdrive bearing for the Losi 8ight. Check your manual for the correct size for your vehicle.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x14x4 Revolution Flanged bearing by Avid Racing Concepts is the standard diff outdrive bearing for the Losi 8ight. Check your manual for the correct size for your vehicle.
Bearing Dimensions:
- 8mm (Inner) x 14mm (Outer) x 4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Revolution" Bearing (3/16 x 3/8 x 1/8 ) (AVD AVR166-RSZ)
This is a single 3/16 x 3/8 x 1/8 Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
3/16 x 3/8 x 1/8 Revolution bearing by Avid Racing Concepts is the standard bearing for the B4, B3, B2, XXX, XX, TC3, T4, TC4, & T3 for hubs, wheels, and transmissions.. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
3/16 x 3/8 x 1/8 Revolution bearing by Avid Racing Concepts is the standard bearing for the B4, B3, B2, XXX, XX, TC3, T4, TC4, & T3 for hubs, wheels, and transmissions.. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- STANDARD: 0.1875" (Inner) x 0.375" (Outer) x 0.125" (Width)
- FRACTION: 3/16" (Inner) x 3/8" (Outer) x 1/8" (Width)
- METRIC: 4.7625mm (Inner) x 9.525mm (Outer) x 3.175mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Revolution" Bearing (8x12x3.5mm) (AVD AVMR128-RSZ)
This is a single 8x12x3.5mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x12x3.5 Revolution bearing by Avid Racing Concepts is the standard bearing for the Associate 18T outdrives. Check your manual for the correct size for your vehicle.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
8x12x3.5 Revolution bearing by Avid Racing Concepts is the standard bearing for the Associate 18T outdrives. Check your manual for the correct size for your vehicle.
Bearing Dimensions:
- METRIC:8mm (Inner) x12mm (Outer) x3.5mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (3x7x3mm) (AVD AV683-RSZ)
This is a single 3x7x3mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
Bearing Dimensions:
- METRIC:3mm (Inner) x7mm (Outer) x3mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Halo" Bearing (3/32 x 3/16 x 3/32) (AVD AVR133ZZ)
This is a single 3/32 x 3/16 x 3/32 Halo Bearing from AVID Racing Concepts.
Bearing Dimensions:
The Halo series of bearings are a high quality steel/chrome bearing with metal shields. These bearings have been tested and proven by many racers.
Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- STANDARD: 0.09375" (Inner) x 0.1875" (Outer) x 0.09375" (Width)
- FRACTION: 3/32" (Inner) x 3/16" (Outer) x 3/32" (Width)
- METRIC: 2.38125mm (Inner) x 4.7625mm (Outer) x 2.38125mm (Width)
Halo have 2x Metal Seals
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Revolution" Bearing (10x15x4mm) (AVD AV6700-RSZ)
This is a single 10x15x4mm Revolution Bearing from AVID Racing Concepts.
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
10x15x4 Revolution bearing by Avid Racing Concepts is the standard bearing for the Adam Drake 2 Losi truck in the rear hubs, Xray hubs and 1/8th scale on-road hubs. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
10x15x4 Revolution bearing by Avid Racing Concepts is the standard bearing for the Adam Drake 2 Losi truck in the rear hubs, Xray hubs and 1/8th scale on-road hubs. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 10mm (Inner) x15mm (Outer) x4mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Revolution" Bearing (6x10x3mm) (AVD AVMR106-RSZ)
This is a single 6x10x3mm Revolution Bearing from AVID Racing Concepts.
Bearing Dimensions:
The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal. Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs. This is the best performance you could attain while maintaining some protection from dirt.
6x10x3 Halo bearing by Avid Racing Concepts is the standard bearing for 1/8th scale steering posts. Check your manual for the correct size for your vehicle if you are not certain
.Bearing Dimensions:
- 6mm (Inner) x 10mm (Outer) x 3mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
AVID Racing Concepts "Metal" Bearing (5x10x4mm) (AVD AVMR105ZZ)
This is a single 5x10x4mm Metal Bearing from AVID Racing Concepts.
Bearing Dimensions:
The Halo series of bearings are a high quality steel/chrome bearing with metal shields. These bearings have been tested and proven by many racers.
5x10x4 Halo bearing by Avid Racing Concepts is the standard bearing for 1/8th nitro clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x10mm (Outer) x4mm (Width)
Fits most 1/8 Clutch bells
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Metal" Bearing (5x13x4mm) (AVD AV695ZZ)
This is a single 5x13x4mm Metal Bearing from AVID Racing Concepts.
Bearing Dimensions:
The Halo series of bearings are a high quality steel/chrome bearing with metal shields. These bearings have been tested and proven by many racers.
5x13x4 Halo bearing by Avid Racing Concepts is a popular bearing for Losi 8ight, Serpent, and Agama clutches. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x13mm (Outer) x4mm (Width)
Fits TLR Serpent, and Agama clutch bells
Out of Stock
$2.00 Inc Tax
AVID Racing Concepts "Revolution" Bearing (5x10x3mm) (AVD AVMR105-RSZ/B3)
This is a single 5x10x3mm Revolution Bearing from AVID Racing Concepts.
NOTICE: This is not the 5x10x4 bearing normally used in clutches. The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal.
Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs.
This is the best performance you could attain while maintaining some protection from dirt.5x10x3 Revolution bearing (MR105-RSZ/B3) by Avid Racing Concepts is used in the TLR 22-4 and touring cars that upgrade to DCJ's. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
NOTICE: This is not the 5x10x4 bearing normally used in clutches. The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this bearing unique is that it has a rubber seal on one side while having a metal shield on the other. Rubber seals are great protectors against dirt but the price is that they offer a little more friction due to the tighter seal.
Now the performance of a metal shield is excellent but allows dirt to get in easily. So with the Revolution series, you run the rubber side towards the outside and the metal towards the inside. You get the protection of the rubber but the added performance by having one less rubber seal.
But you don't have to stop there, if you are truly performance oriented and want the least amount of friction then you're in luck. You can quickly pop off the rubber seal with an X-acto and place the metal shield facing outward in your hubs.
This is the best performance you could attain while maintaining some protection from dirt.5x10x3 Revolution bearing (MR105-RSZ/B3) by Avid Racing Concepts is used in the TLR 22-4 and touring cars that upgrade to DCJ's. Check your manual for the correct size for your vehicle if you are not certain.
Bearing Dimensions:
- 5mm (Inner) x10mm (Outer) x3mm (Width)
Revolution have 1x Rubber and 1x Metal Seal
- 1