Vintage/Retro Cars & Parts
Schumacher Pro Transmission Upgrade - CAT XLS/PROCAT (SCH U7236)
Full blown transmission upgrade so you can use modern more powerful motors below 17.5T.
The ProCat has been tested with 13.5T motors and the standard transmission and not experienced any issues.
Kit includes;
The ProCat has been tested with 13.5T motors and the standard transmission and not experienced any issues.
Kit includes;
- U7241 - Pro Front Belt - CAT XLS
- U7242 - Pro Rear Belt (pr) - CAT XLS
- U7154 - Gear; 89T Spur - Slipper
- U7239 - Pro Layshaft - CAT XLS
- U7244 - Pro Transmission O-Rings - CAT XLS
- U7239 - Pro Layshaft - CAT XLS
- U3869 - Slipper Set - CAT SX3 (pr)
- U3364 - Slipper Pad; PTFE Octagon pr
- U3136 - Ball Bearing - 5x8x2.5 - Shield (pr)
- U4124 - SPEED PACK - Shims 5 x 7 x 0.4mm - pk6
- U4106 - Slipper Spring
- U7244 - Pro Transmission O-Rings - CAT XLS
- U7281 - Tungsten Carbide Balls 3mm (pk12) X 2
- U4943 - Ball Bearing - 1/8x1/4 Sheild - (pr) X 3
- U7216 - Thrust Race F1/8 x 5/16 x 9/64 Grooved X 2
- U7155 - Bearing 8 x16 x 5 Black Seal (pr) X 2
- U4869 - Spool Fences - Mi6 (pr) X 2
- U4899 - Wishbone Thrust Washers - Mi6 - (pk4) X 2
- U7142 - Integrator Axle - CAT XLS X 2
- U7158 - Integrator Washer (pr) - CAT XLS X 2
- U7144 - Drive Shaft Mouldings (8 pcs) - CAT XLS X 2
- U7243 - Alloy Washer Carriers (pr) - CAT XLS X 2
- U4238 - M3 x 16mm Alloy Csk Screws pk10
- U7238 - Pro Rear Diff Diff Pulley & Fences - CAT XLS
- U7237 - Pro front Diff Pulley & Fences - CAT XL
Allows for modern powerful motors
Schumacher Pro Transmission Upgrade - Topcat / Cougar Classic (SCH U7600)
Pro transmission set for the TOP CAT and Cougar Classic, enables the use of modern power systems and motors down to 6.5T. Includes slipper clutch, coarser pitched belts and pulleys and alloy washer carriers.
Layshaft bearings pictured not included, use original transmission bearings.
Comes with 98T spur.
Layshaft bearings pictured not included, use original transmission bearings.
Comes with 98T spur.
Allows for modern powerful motors
Jconcepts 2.2” Front Rims (4) (Yellow): RC10, RC10B2 and RC10B3 RC kits. (JCO 3403Y)
This is a packet of (4) Yellow Front Rims from Jconcepts for the RC10, RC10B2 and RC10B3 RC kits.
JConcepts Mono 2.2 Front Wheels were developed to support the vintage RC enthusiast. The original offset front wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape and utilize the non-flanged 3/16 x 3/8” bearing.
JConcepts Mono 2.2 Front Wheels were developed to support the vintage RC enthusiast. The original offset front wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape and utilize the non-flanged 3/16 x 3/8” bearing.
JConcepts has taken the liberty of increasing the wheel width to the inside in order to accommodate today’s race tires. The wheels include a vent hole on the outer diameter and an added outer “catch” to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are molded in a durable material with precise techniques to ensure dependability and performance.
Mono wheels are available in bright white and fluorescent racing yellow, packaged 4 pieces per package and backed with JConcepts racing heritage and customer support.
Notes from the team
The Mono front wheel is designed using the original and intended RC10 offset. In order for the track width to be original, it’s important to use either the AE #6220 or JC #2308 front axle.
Features:
- Classic dish styling
- Popular 2.2” mounting bead diameter
- Available in bright white and fluorescent racing yellow
- Added width to accommodate modern tires
- Durable material, precision molding techniques
- Compatible with RC10, RC10B2 and RC10B3
Added width to accommodate modern tires
Jconcepts 2.2” Rear Rims (4) (Yellow): RC10, RC10B2 and RC10B3 RC kits with 3/16" axle (JCO 3404Y)
This is a packet of (4) Yellow Rear Rims from Jconcepts for the RC10, RC10B2 and RC10B3 RC kits with a 3/16" axle.
Features:
JConcepts Mono 2.2 Rear Wheels were developed to support the vintage RC enthusiast. The original offset rear wheels for the RC10, RC10B2 and RC10B3 have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape and utilize the pin drive setup for 3/16" axels.
JConcepts has taken the liberty of increasing the wheel width to the inside in order to accommodate today’s race tires. The wheels include a vent hole on the outer diameter and an added outer “catch” to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are molded in a durable material with precise techniques to ensure dependability and performance.
Mono wheels are available in bright white and fluorescent racing yellow, packaged four pieces per package and backed with JConcepts racing heritage and customer support.
Notes from the team
The inner hole diameter of the Mono wheels are designed for 3/16” axles with traditional pin drive setup.
Features:
- Classic dish styling
- Popular 2.2” mounting bead diameter
- Available in bright white and fluorescent racing yellow
- Added width to accommodate modern tires
- Durable material, precision molding techniques
- Compatible with RC10, RC10B2 and RC10B3
Added width to accommodate modern tires
- 1