2wd - Fox
Tamiya TBLE-04S Electronic Speed Controller (TAM 45069)
This is the TBLE-04S Electronic Speed Controller from Tamiya that is Compatible with brushed and brushless motors.
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
Features:
LO/HI Battery Cut-off Information:
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
- Maximum continuous current: 75A
- Input voltage: 6.6V - 7.2V
- Dimensions: 41.5mm x 33.4mm x 18mm
- Weight: 45g (including cables)
Features:
- Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
- Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
- Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
- Features overheating and overload protection functions to help ensure that your equipment avoids damage.
- Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.
LO/HI Battery Cut-off Information:
- LOW & HIGH Battery Low Voltage Protection Feature:
- LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
- HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)
Compatible with brushed and brushless motors
Tamiya 23T Brushed 540 Super Stock Motor Type-BZ (TAM 53930)
This is a 23T Brushed 540 Super Stock Motor Type-BZ from Tamiya ideally suited to their 1/10 Off-road RC kits.
Features include:
Features include:
- This versatile motor features torque ideally suited to off-road cars.
- It utilizes brush damper, terminal heat sink, and chip condenser components.
- A sponge cover is included to protect the motor.
- The gun metal color can has slits to help heat dissipate.
- Features a blue anodized end bell.
- Input voltage: 7.2V
- RPM (without load): 26,500
- Maximum torque: 49mN-m (7.2V)
- Use ball bearings when installing this motor.
- XV-01 series chassis will require motor extension cables.
ideally suited to off-road cars
Out of Stock
$64.95 Inc Tax
Tamiya 23T Brushed 540 Super Stock Motor Type-TZ (TAM 53696)
This is a 23T Brushed 540 Super Stock Motor Type-TZ from Tamiya which produces excellent torque, making it well-suited to low speed circuits or for endurance racing.
Features include:
Features include:
- Input voltage: 7.2-8.4V
- RPM (without load): 26,500
- Maximum torque: 500gf-cm (at 7.2V)
- 23T
Produces excellent torque
Tamiya 32T Brushed 540 Formula Tuned Motor (TAM 54176)
This is a 32T Brushed 540 high performance electric motor from Tamiya with replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor cooling and incorporates a detachable inboard capacitor.
• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).
Features include:
• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).
Features include:
- Input voltage: 7.2-8.4V
- RPM (without load): 14,000
- Maximum torque: 39mN/m of torque (at 7.2V)
- 32T
for direct drive F1 kits
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
Supplied with most Tamiya RC Kits
Tamiya Gold Plated Wheel Set: Fox & NovaFox (TAM 9335696)
This is a Gold Plated Front & Rear Wheel Set from Tamiya designed for their (58051) Fox / (58577) Novafox RC Kits.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
Both Front and Rear Included
Tamiya A Parts Bumpers: Fox & Novafox (TAM 0005184)
This is an A parts sprue from Tamiya designed for their (58051) Fox / (58577) Novafox RC Kits.
good for restoration projects
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 28mm / 98mm
Perfect for building Tamiya RC Models
Kyosho Delta Peak USB Charger, 7.2V - NiMH/NiCd (Deans) (KYO KP 72203D)
This is a USB peak charger from Kyosho suitable for use with standard 7.2V RC NiMH/NiCd batteries.
Instruction manual included.
Specifications:
Instruction manual included.
Specifications:
- Connector: Deans T-Style
- Output: 7.2V DC, 250mA
- Input: 5V DC
Nice budget charger
Team Losi Racing TLR-LOK Threadlocker (Blue) (5ml) (TLR76009)
This is a 5mL bottle of TLR-LOK Blue Threadlocker from Team Losi Racing.
Features:
- Prevents threaded fasteners, nuts, bolts and screws from loosening
- Can be removed using normal hand tools
- Ideal for clutch screws, motor mount screws, shock piston screws, or anywhere that screws meet with metal
- TLR's removable threadlock
- Withstands vibrations
- Keeps air, oil and water out
Stops screws rattling loose.
Out of Stock
$15.95 Inc Tax
Koswork Thread lock (Blue) (10ml) (KOS50111)
This is a 10mL bottle of Blue (medium) Thread lock from Koswork.
Features:
- Prevents threaded fasteners, nuts, bolts and screws from loosening
- Can be removed using normal hand tools
- Ideal for clutch screws, motor mount screws, shock piston screws, or anywhere that screws meet with metal
- Withstands vibrations
- Keeps air, oil and water out
Stops screws rattling loose.
Tamiya Motor Connector Plugs (10) (TAM 50245)
This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor.
This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.
The connectors in this set can be used to replace worn out connectors.
Key Features:
- For: 540 Brushed Motor
- Material: Metal / Rubber
- Color: Silver
What's In The Box?
- 10 Male connectors
- 10 Male rubber boots
- 10 Female connectors
- 10 Female rubber boots
Includes enough for 5 motors
- 1