4wd Clod Buster, Bullhead

Sort By:  
Twin Motor ESC
Out of Stock
$99.95  Inc Tax
ideally suited to off-road cars
Out of Stock
$64.95  Inc Tax
Produces excellent torque
$59.95  Inc Tax
for direct drive F1 kits
$49.95  Inc Tax
Replace that old chassis
Out of Stock
$45.00  Inc Tax
Add new parts for your old car
$35.95  Inc Tax
Supplied with most Tamiya RC Kits
$34.95  Inc Tax
Engine blower assembly
$26.95  Inc Tax
Lower arms
$24.95  Inc Tax
Gearbox case & wheel adapters
$24.95  Inc Tax
Grille, roll bar and light
Out of Stock
$22.50  Inc Tax
Some common Nuts and Bolts for Tamiya cars
$20.00  Inc Tax
Perfect for building Tamiya RC Models
$19.95  Inc Tax
Front and Rear bumpers
$18.95  Inc Tax
Some common Nuts and Bolts for Tamiya cars
Out of Stock
$18.00  Inc Tax
A must for any Tamiya Enthusiast
$17.95  Inc Tax
Add new parts for your old car
$16.95  Inc Tax
Includes enough for 5 motors
$9.95  Inc Tax
Tamiya TEU-201BK Electronic Speed Controller (TAM 45073)
This is the TEU-201BK Twin Motor Electronic Speed Controller from Tamiya that is Compatible with brushed motors.

This ESC is designed for dual motor builds and features smooth, predictable power output.


Specifications:
  • Maximum continuous current: 80A
  • Input voltage: 6.6V - 7.2V
  • Dimensions: 45.9mm x 34.7mm x 26.5mm
  • Weight: 75g (including cables)
  • Output – Forward 100%, reverse 50%
  • Tamiya JST type battery connector

Twin Motor ESC
Out of Stock
$99.95  Inc Tax
Tamiya 23T Brushed 540 Super Stock Motor Type-BZ (TAM 53930)
This is a 23T Brushed 540 Super Stock Motor Type-BZ from Tamiya ideally suited to their 1/10 Off-road RC kits.


Features include:
  • This versatile motor features torque ideally suited to off-road cars.
  • It utilizes brush damper, terminal heat sink, and chip condenser components.
  • A sponge cover is included to protect the motor.
  • The gun metal color can has slits to help heat dissipate.
  • Features a blue anodized end bell.
  • Input voltage: 7.2V
  • RPM (without load): 26,500
  • Maximum torque: 49mN-m (7.2V)
  • Use ball bearings when installing this motor.
  • XV-01 series chassis will require motor extension cables.
        


ideally suited to off-road cars
Out of Stock
$64.95  Inc Tax
Tamiya 23T Brushed 540 Super Stock Motor Type-TZ (TAM 53696)
This is a 23T Brushed 540 Super Stock Motor Type-TZ from Tamiya which produces excellent torque, making it well-suited to low speed circuits or for endurance racing.

Features include:
  • Input voltage: 7.2-8.4V
  • RPM (without load): 26,500
  • Maximum torque: 500gf-cm (at 7.2V)
  • 23T




Produces excellent torque
$59.95  Inc Tax
Tamiya 32T Brushed 540 Formula Tuned Motor (TAM 54176)
This is a 32T Brushed 540 high performance electric motor from Tamiya with replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor cooling and incorporates a detachable inboard capacitor.

• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).

Features include:
  • Input voltage: 7.2-8.4V
  • RPM (without load): 14,000
  • Maximum torque: 39mN/m of torque (at 7.2V)
  • 32T



for direct drive F1 kits
$49.95  Inc Tax
Tamiya Chassis: Clod Buster / Bullhead (TAM 0335085)
This is a replacement chassis from Tamiya for their Clod Buster and Bullhead monster trucks.

Replace that old chassis
Out of Stock
$45.00  Inc Tax
Tamiya Wheel Bag (2): Clod Buster / Bull Head (TAM 9335085)
This is the Wheel Bag from Tamiya designed for their Clod Buster and Bull Head RC Kits.

May fit other cars, please check your manual for compatibility.
Add new parts for your old car
$35.95  Inc Tax
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.

These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.  

                                                                               
Supplied with most Tamiya RC Kits
$34.95  Inc Tax
Tamiya L Parts (Chrome): Clod Buster (TAM 9115146)
This is the "L" parts from Tamiya for their Clod Buster monster trucks.


Engine blower assembly
$26.95  Inc Tax
Tamiya C Parts: Clod Buster (TAM 0005295)
This is the "C" parts from Tamiya for their Clod Buster monster trucks.


Lower arms
$24.95  Inc Tax
Tamiya B Parts: Clod Buster (TAM 0005294)
This is the "B" parts from Tamiya for their Clod Buster monster trucks.


Gearbox case & wheel adapters
$24.95  Inc Tax
Tamiya H Parts (Chrome): Clod Buster (TAM 0004894)
This is the "H" parts from Tamiya for their Clod Buster monster trucks.


Grille, roll bar and light
Out of Stock
$22.50  Inc Tax
Tamiya Screw Bag B: Bull Head (TAM 9465367)
This is the screw bag 'B' from Tamiya for their Bull Head vehicles.

Some common Nuts, Washers and Bolts for Tamiya cars.




Some common Nuts and Bolts for Tamiya cars
$20.00  Inc Tax
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.

This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.

An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.

  • Precision tooled magnetic bit
  • For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
  • Bit diameter/length: 4mm / 100mm
  • Grip diameter/length: 28mm / 98mm
.
Perfect for building Tamiya RC Models
$19.95  Inc Tax
Tamiya J Parts (Chrome): Clod Buster (TAM 9115021)
This is the "J" parts from Tamiya for their Clod Buster monster trucks.


Front and Rear bumpers
$18.95  Inc Tax
Tamiya Screw Bag A: Bull Head (TAM 9465366)
This is the screw bag 'A' from Tamiya for their Bull Head vehicles.

Some common Nuts, Washers and Bolts for Tamiya cars.




Some common Nuts and Bolts for Tamiya cars
Out of Stock
$18.00  Inc Tax
Tamiya Philips (+) Screwdriver Pro (Medium) (TAM 74119)
This is a Medium Philips (+) Screwdriver Pro from Tamiya.

This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.

An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.

  • Precision tooled magnetic bit
  • For use with PH1 (2-2.6mm; JIS M2-M2.6) plus (+) head screws.
  • Bit diameter/length: 4mm / 100mm
  • Grip diameter/length: 26mm / 83mm
.
A must for any Tamiya Enthusiast
$17.95  Inc Tax
Tamiya Roll bar: Clod Buster / Bull Head / Midnight Pumpkin (TAM 9335041)
This is the Roll Bar from Tamiya designed for their Clod Buster, Bull Head, Midnight Pumpkin RC Kits.

May fit other cars, please check your manual for compatibility.


Add new parts for your old car
$16.95  Inc Tax
Tamiya Motor Connector Plugs (10) (TAM 50245)

This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor. 

This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.

The connectors in this set can be used to replace worn out connectors.

Key Features:

  • For: 540 Brushed Motor
  • Material: Metal / Rubber
  • Color: Silver

What's In The Box?

  • 10 Male connectors
  • 10 Male rubber boots
  • 10 Female connectors
  • 10 Female rubber boots






Includes enough for 5 motors
$9.95  Inc Tax
Per Page      1 - 18 of 18
  • 1