Putty, Glues, Polishing Compounds

This is a 34 gram tube of Light Curing Putty from Tamiya.

Revolutionary Light-Curing Putty to speed-up finishing time!

• For any busy modeler.
• Putty cures rapidly once exposed to a direct light source.
• Unbelievable curing time.
• The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).
• Easy to handle one-component putty.
• The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very easy usability. Consisting of a smooth paste property, the putty is easy to apply to all surfaces.
• Does not shrink during curing.
• Compared to conventional polyester based putties, the Light-Curing Putty displays almost no shrinking when drying.
• Realizes excellent workability after curing.
• After completely curing, the Light-Curing Putty realizes easy cutting, trimming and filing, ensuring to obtain a smooth surface.
• Can be painted over with plastic paints.
• After curing, the Light-Curing Putty can be easily painted over with plastic paints.
• *Original color: Yellow, Net: 34g (aluminum tube).

This is a 20g tube of Tamiya Clear Multipurpose Cement.



Characteristics:

• Highly transparent cement is great for affixing a range of parts including clear and plated components.
• Is gentle on painted surfaces.
• Low viscosity makes for minimal stringing and easy use.

This is a 32 gram tube of White Putty from Tamiya.

The currently available Tamiya Putty (Basic Type) has long been praised by modellers for its high quality and ease of use. However, it's gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modellers with a white-colored putty to solve this problem.

Useful for filling holes and seam lines, this versatile putty can be used on plastic, wood, or metal, and can also be diluted with lacquer thinner for a wide range of applications.

Each aluminum tube contains 32 grams of putty.

This is a 32 gram tube of Basic Putty from Tamiya.

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a flat surface tool.

Note: Tamiya's basic type putty is not intended to fill large gaps. It is meant to fill in seams and imperfections in plastic model surfaces. The basic putty may also be used for resin model, metal model and vinyl model applications.

Each aluminum tube contains 32 grams of putty.

This is a 20g tube of Tamiya Craft Bond.


Perfect for Papercraft Projects!
This water-based craft bond can be used for diorama creation and papercraft model assembly. It is compatible with paper, wood, fabric, leather, foam board, and styrofoam and can even attach them to other materials such as metal and soft vinyl.


Characteristics:

• Compared to standard wood glues, this craft bond dries into a softer consistency to help provide shock protection. Also, it does not transfer excessive water to paper, so the joints remain wrinkle-free.
• The nozzle features a thin tube to aid with application on small parts.
• The craft bond dries transparently and thus can be used for attaching clear parts such as car headlights.

This is a 22 gram tube of Coarse Polishing Compound from Tamiya.

This paste polishing compound was developed specifically for use on plastic models.

Relatively large particles - in combination with the paste - are highly effective when smoothing out any rough finishes on your model's surface, and it can be washed away using water when the job is finished.

Great for use before painting, plus on clear or metal parts.

This is a 22 gram tube of Fine Polishing Compound from Tamiya.

This paste polishing compound was developed specifically for use on plastic models.

This paste polishing compound uses small particles for the kind of finely-polished, smooth surface that is required before applying your model's topcoat.

It can also be used to clear up any scratches on transparent parts. and it can be washed away using water when the job is finished.

This is a 40ml bottle of cement from Tamiya for assembling plastic (styrene) models.

Comes is a stable 40mm square bottle which is 3.5cm tall.
Contents: 40ml.
Features a brush for application on the reverse side of the cap.

This is a 20ml bottle of cement from Tamiya for assembling plastic (styrene) models.

Comes is a stable hexagonal bottle 47mm tall.
Contents: 20ml.
Features a brush for application on the reverse side of the cap.