Tamiya On-Road Electric Kits
Tamiya 1/10 R/C TRF101W Chassis Kit (TAM 42279)
The Tamiya Racing Factory has come up with a new variant of the TRF101. The "Wide-tread" Specification, designated as the TRF101W F1 chassis kit, is ideally suited for high speed racing circuits. The TRF101W benefits from the TRF team's wealth of racing experience and data. It retains many of the original basic features of the TRF101 chassis while adding a number of upgrades to transform the front suspension into a wide-tread unit to make the chassis suitable for "foam-tire" racing. Other tweaks include a 2.5mm thickness main chassis to make the car more adaptable to low grip surfaces as well as a change to the damper position to make initial dampening more effective.
Revamped front suspension arms: The redesigned carbon fiber upper arm piece is married with carbon fiber lower arms to bring the chassis excellent durability and enhance the unit's controllability. Both the front suspension mount and aluminum servo stay have also been redesigned for the TRF101W chassis.
Greater Flexibility: The thickness of the carbon fiber lower deck has been reduced to 2.5mm to provide greater chassis flexibility, which will provide enhanced stability on low-grip surfaces. Battery posts have been moved forward, transferring pitch loads closer to the front of the unit and boosting front traction.
Smoother, faster dampening: The newly-designed middle brace moves the pitch damper attachment position 2.5mm to the rear, leading to faster response and keeping the car close to the track surface. The roll damper employs a new piston with equal contraction and extension lengths for smoother performance.
Requires:2-channel radio, steering servo, ESC, motor, battery with compatible charger, F-1 body set, and foam racing tires with wheels.
Revamped front suspension arms: The redesigned carbon fiber upper arm piece is married with carbon fiber lower arms to bring the chassis excellent durability and enhance the unit's controllability. Both the front suspension mount and aluminum servo stay have also been redesigned for the TRF101W chassis.
Greater Flexibility: The thickness of the carbon fiber lower deck has been reduced to 2.5mm to provide greater chassis flexibility, which will provide enhanced stability on low-grip surfaces. Battery posts have been moved forward, transferring pitch loads closer to the front of the unit and boosting front traction.
Smoother, faster dampening: The newly-designed middle brace moves the pitch damper attachment position 2.5mm to the rear, leading to faster response and keeping the car close to the track surface. The roll damper employs a new piston with equal contraction and extension lengths for smoother performance.
Requires:2-channel radio, steering servo, ESC, motor, battery with compatible charger, F-1 body set, and foam racing tires with wheels.
Collectors delight; Very Rare - Selling on Behalf
Tamiya 1/10 RC Chassis Kit (M-08R) (TAM 47480)
The Tamiya M-08 Chassis platform gets a performance boost with this Limited-Edition release. The M-08R Chassis Kit employs various kinds of option parts such as a ball differential, for the rear gearbox, and TRF (Tamiya Racing Factory) precision oil dampers to get ready for club races!
About the M-08 standard edition:
This assembly kit creates the M-08 Concept high performance R/C chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections that allow 3 different wheelbase selections. Smooth 4-wheel double wishbone suspension utilizes CVA oil dampers and long suspension arms for ground hugging performance, and front caster with a pairing of 0-degree suspension mount and 2-degree hub carrier. An oil-filled gear differential provides smooth drive, while motor and gearbox are positioned to ensure powerful drive under acceleration.
Option Parts Included in the M-08R kit:
42143: 4mm Aluminum Serrated Wheel Nut (4pcs. -Blue)
42357: Cross Joints for Low Friction Assembly Universal Shafts
51000: Hi-Torque Servo Saver (Black)
53509: Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201)
53642: 5mm Aluminum Ball Connector (Blue)
53823: Clamp Type Aluminum Wheel Hub (5mm Thick)
53851: 46mm Titanium Coated Suspension Shafts 2pcs.
53917: 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension
53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)
54183: M-Chassis Reinforced Freewheel Axle Set
54868: Open Face 5mm Reinforced Adjusters (Medium/8pcs.)
54869: Open Face 5mm Reinforced Adjusters (Long/8pcs.)
54906: M-08 Concept Aluminum Shaft Set
54969: 33mm Lightweight Aluminum Swing Shafts (2pcs.)
Features:
Required Items (Sold Separately)
About the M-08 standard edition:
This assembly kit creates the M-08 Concept high performance R/C chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections that allow 3 different wheelbase selections. Smooth 4-wheel double wishbone suspension utilizes CVA oil dampers and long suspension arms for ground hugging performance, and front caster with a pairing of 0-degree suspension mount and 2-degree hub carrier. An oil-filled gear differential provides smooth drive, while motor and gearbox are positioned to ensure powerful drive under acceleration.
Option Parts Included in the M-08R kit:
42143: 4mm Aluminum Serrated Wheel Nut (4pcs. -Blue)
42357: Cross Joints for Low Friction Assembly Universal Shafts
51000: Hi-Torque Servo Saver (Black)
53509: Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201)
53642: 5mm Aluminum Ball Connector (Blue)
53823: Clamp Type Aluminum Wheel Hub (5mm Thick)
53851: 46mm Titanium Coated Suspension Shafts 2pcs.
53917: 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension
53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)
54183: M-Chassis Reinforced Freewheel Axle Set
54868: Open Face 5mm Reinforced Adjusters (Medium/8pcs.)
54869: Open Face 5mm Reinforced Adjusters (Long/8pcs.)
54906: M-08 Concept Aluminum Shaft Set
54969: 33mm Lightweight Aluminum Swing Shafts (2pcs.)
Features:
- 1/10 scale R/C model assembly kit.
- The TA06 Rear Ball Differential Set (Item 54306) utilizes twelve 3/32-inch balls to give superb stability.
- Includes carbon fiber components such as battery holders and body mount base (Item 54908).
- M-08 Concept Reinforced K Parts (Gearbox) (Item 54983) give sturdier gearbox and steering setups, for more efficient drive and improved steering feel.
- Comes with the dedicated chassis weight (20g).
- Features hex head screws.
- M-07 Concept Reinforced D Parts (Suspension Arms) (Item 54811) featuring carbon fiber-reinforced resin allow superior cornering ability.
- Durable, lightweight aluminum turnbuckle shafts (3x18mm; Item54247, 3x23mm; Item 54248, and 3x32mm; Item 54249) allow adjustment of length without removing adjusters.
- Includes a blue anodized finish version of the TRF Super Short Big Bore Dampers+ (4pcs.) (Item 42355).
- The 1.3mm diameter damper pistons (x3) give smooth oil flow and facilitate more flexible suspension.
- Requires: 2-channel radio, steering servo, ESC, 540-motor, 7.2-7.4volt battery pack with compatible charger, M-chassis 60D tires, and M-chassis body set.
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Battery
- Charger
- M-Chassis Body
- M-chassis tires
- Paint
- AA Batteries for Transmitter
Special Limited-Edition Model
Out of Stock
$535.00 Inc Tax
Tamiya 1/10 RC Volkswagen Type 2 (T1) Kitset (M-05) (TAM 47453)
This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans.
For a limited time only, you can get your hands on this Peace and Love decorated version body that turns it into a veritable Hippy wagon!
The R/C assembly kit is based upon the proven 2WD M-05 chassis. The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity.
Features:
• PRE-PAINTED polycarbonate body in TAMIYA PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors.
• Brand new sticker sheet with hippy-inspired designs included to decorate the body.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• The M-05 has a wide range of Hop-Up Option parts available separately to tune it.
Specifications:
Required Items (Sold Separately)
For a limited time only, you can get your hands on this Peace and Love decorated version body that turns it into a veritable Hippy wagon!
The R/C assembly kit is based upon the proven 2WD M-05 chassis. The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity.
Features:
• PRE-PAINTED polycarbonate body in TAMIYA PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors.
• Brand new sticker sheet with hippy-inspired designs included to decorate the body.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• The M-05 has a wide range of Hop-Up Option parts available separately to tune it.
Specifications:
| Length: | 426mm |
| Width: | 195mm |
| Height: | 177mm |
| Wheelbase: | 239mm |
| Chassis: | M-05 lightweight monocoque |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Very Rare - Selling on Behalf
Tamiya 1/10 RC RC FORMULA E GEN2 Kitset (TC-01) (TAM 58681)
This R/C model assembly kit recreates the GEN2 race car that is used in the Formula E world championship, the pinnacle of electric car racing. The sleek, high-tech body with arch covered wheels is recreated in polycarbonate.
Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Required Items (Sold Separately)
Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Specifications:
| Length: | 430mm |
| Width: | 188mm |
| Height: | 99mm |
| Wheelbase: | 257mm |
| Tire Width/Diameter (Front and Rear): | 24/64mm |
| Chassis: | Composite Monocoque-Frame Chassis |
| Transmission type: | Shaft-Driven Full-Time 4WD |
| Differential type: | Front & Rear Oil-Filled Gear Differentials |
| Suspension: | Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension |
| Gear Ratio: | 6.56:1 (with kit 24T pinion) |
| Motor: | Type 540 motor (included) |
| Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Electronic Speed Control
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Amazingly detailed body
Tamiya 1/10 RC MERCEDES CLK GT-R Kitset (TC-01) (TAM 58731)
The Mercedes-Benz CLK-GTR R/C car kit first made its appearance in the Tamiya product catalog in 1998 on the popular TA-03R chassis platform then later the easy to assemble TT-01E platform. The CLK-GTR has made a return this time on our high-performance TC-01 chassis platform, which is destined to provide the most performance yet as it takes advantage of the Mercedes sleek body profile and the low center of gravity of the TC-01!
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Features:
Specifications:
Required Items (Sold Separately)
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Features:
- 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
- 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
- Separately molded white ABS plastic parts recreate side mirrors and rear wing.
- Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
- TC-01 chassis
- The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
- 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
- Use spacers and shims to easily alter camber, skid, and toe angle settings.
- Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
- Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.
Specifications:
| Length: | 470mm |
| Width: | 194mm |
| Wheelbase: | 257mm |
| Tire Width/Diameter (Front and Rear): | 24/64mm |
| Chassis: | Composite Monocoque-Frame Chassis |
| Transmission type: | Shaft-Driven Full-Time 4WD |
| Differential type: | Front & Rear Oil-Filled Gear Differentials |
| Suspension: | Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension |
| Gear Ratio: | 6.56:1 (with kit 24T pinion) |
| Motor: | Type 540 motor (included) |
| Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Electronic Speed Control
- Low Profile Servo (Note: Standard Size Servos cannot be used),
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Amazing suspension setup
Out of Stock
$499.95 Inc Tax
Tamiya 1/10 RC NISSAN R91CP Kitset (TAM 47531)
This R/C model assembly kit recreates the Nissan R91CP, which followed up its 1991 All-Japan Sports Prototype Championship triumph with a victory in the 24 Hours of Daytona in 1992. The aerodynamic, sleek form is recreated in lightweight and durable polycarbonate plastic.
The rear induction pod, side mirror on the driver’s side and windshield wiper are separately molded and add extra realism. Stickers are included for sponsor logos and racing number, and masking stickers for windows and headlights. The cockpit is realistically recreated with a steering wheel and shift lever; the driver figure has 3 marking options.
The direct-drive 2WD chassis gives a crisp, responsive drive and allows a range of settings for features such as ground clearance, chassis roll and rear oil damper. Take this chance to get your hands on a champion!
Direct-Drive 2WD Chassis
Based around an ABS plastic bathtub, with space frames front and rear and FRP plate, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive drive.
At the front, it has an independent coil spring king pin suspension setup, while the rear rigid suspension is a 3-point design with a 1.5mm thickness FRP T-bar and CVA oil damper; teamed up with sponge tires front and rear, they ensure superb road holding. Additionally, use of spacers allows two different front and three rear ground clearance setups.
The 2WD direct-drive setup transmits power straight to the rear wheels via a spur gear, with a built-in ball differential giving limited slip diff effect.
Features include:
Required Items (Sold Separately)
The rear induction pod, side mirror on the driver’s side and windshield wiper are separately molded and add extra realism. Stickers are included for sponsor logos and racing number, and masking stickers for windows and headlights. The cockpit is realistically recreated with a steering wheel and shift lever; the driver figure has 3 marking options.
The direct-drive 2WD chassis gives a crisp, responsive drive and allows a range of settings for features such as ground clearance, chassis roll and rear oil damper. Take this chance to get your hands on a champion!
Direct-Drive 2WD Chassis
Based around an ABS plastic bathtub, with space frames front and rear and FRP plate, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive drive.
At the front, it has an independent coil spring king pin suspension setup, while the rear rigid suspension is a 3-point design with a 1.5mm thickness FRP T-bar and CVA oil damper; teamed up with sponge tires front and rear, they ensure superb road holding. Additionally, use of spacers allows two different front and three rear ground clearance setups.
The 2WD direct-drive setup transmits power straight to the rear wheels via a spur gear, with a built-in ball differential giving limited slip diff effect.
Features include:
- The sleek, low-profile and wide aerodynamic form is recreated by a polycarbonate body.
- Headlights are separate polycarbonate parts. Paint them black and use the included stickers to finish them off.
- The cockpit is realistically recreated with a steering wheel and a shift lever; the driver figure has 3 marking options.
- The aero mirror on the driver’s side A pillar is faithfully captured.
- The rear induction pod for cooling brakes is depicted with a separately molded component.
- The large rear wing consists of plastic stays and a polycarbonate main wing and end plates.
- The composite chassis is based around an ABS plastic bathtub frame with space frames front and rear and FRP plate.
- An upper space frame solidifies the front end. Choose between two ground clearance settings.
- The front suspension uses kingpins and coil springs.
- The front 1-piece wheels feature a stylish 5-spoke design. Stickers are included to recreate the Goodyear and Eagle logos.
- The gearbox rests atop an FRP T-bar, which is damped with a CVA oil damper in a rigid rear setup.
- The 2WD direct-drive setup has a spur gear with built-in ball differential. Choose between three ground clearance setups.
- Lightweight and grippy sponge tires are wider at the rear.
Specifications:
| Length: | 480mm |
| Width: | 204mm |
| Height: | 109mm |
| Wheelbase: | 270mm |
| Tire Width/Diameter (Front and Rear): | 28/64mm (front), 45/68mm (rear) |
| Chassis: | Bathtub frame with space frame and FRP plate |
| Transmission type: | Transverse motor direct-drive 2WD |
| Differential type: | Ball differential |
| Suspension: | Independent coil spring king pin suspension (front), 3-point suspension with a 1.5mm thickness |
| Gear Ratio: | 5.00:1 |
| Motor: | 23T Sport-Tuned motor (included) |
| Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Electronic Speed Control
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Limited Edition kit
Tamiya 1/10 R/C FORD ESCORT MK.II RALLY: MF-01X (4wd) (TAM 58687)
This R/C model assembly kit recreates the classic Ford Escort Mk.II in rally racing form. It was a RAC Rally Champion from 1975-1979. The pre-painted body sits on top the Tamiya MF-01X chassis that is capable both on asphalt and flat dirt surfaces.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tires with width/diameter of 27/69mm are also included.
Features:
Specifications:
Required Items (Sold Separately)
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tires with width/diameter of 27/69mm are also included.
Features:
- 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L).
- Polycarbonate body pre-painted in White.
- Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps.
- Polycarbonate front and rear light cases are compatible with separately sold Tamiya 5mm LEDs.
- Stickers are included to recreate blue livery sections, sponsor logos and more.
- The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
- Tamiya Torque Tuned Motor included.
Specifications:
| Length: | 414mm |
| Wheelbase: | 239mm (L) |
| Transmission type: | 4WD |
| Differential type: | Gears |
| Suspension type: | Fully Independent Double Wishbone |
| Damper: | Friction type |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Pre-Painted Body
Out of Stock
$350.00 Inc Tax
Tamiya 1/10 HONDA CITY TURBO (WR-02C) (TAM 58611)
This RC model is an updated release of a Tamiya classic, which was released as "Willy"s Wheeler" back in 1983. It has returned upon a newly-overhauled variant of the WR-02 chassis. It is fitted with a Honda City Turbo body, which also includes a comical driver figure.
WR-02C
The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension.
The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the centerline-mounted motor, and passes it on to the rear wheels.
A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is also positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling.
The model also features 4-wheel independent double wishbone suspension for a smooth ride. For ease of assembly, the gearbox and motor come pre-assembled.
Features:
Specifications:
Required Items (Sold Separately)
WR-02C
The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension.
The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the centerline-mounted motor, and passes it on to the rear wheels.
A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is also positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling.
The model also features 4-wheel independent double wishbone suspension for a smooth ride. For ease of assembly, the gearbox and motor come pre-assembled.
Features:
- Adjustable Gear Ratio Yes
- Bearings Plastic bushing
- Body Material ABS Plastic
- Body Stickers Included
- Chassis Material ABS Plastic
- Chassis Type WR-02
- Construction Type Assembly kit
- Differential Type Gear
- Drive Type 2WD
- Electronic Speed Control (ESC) Includes Hobbywing 1060
- Led Light Buckets No
- Motor 540-brushed type
- Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint.
- Scale 1/10
- Shock Damper Friction damper
- Special Feature 1 The WR-02C chassis is based upon the WR-02, and inherits its playful and fun drivability. It features an unusual 185mm wheelbase.
- Special Feature 2 Power is supplied to the rear wheels from the centrally-mounted motor.
- Special Feature 3 Features wide rear tires.
- Special Feature 4 Comes with a pre-assembled gearbox and motor unit for faster ease of assembly.
- Special Feature 5 The small, playful hatchback body remains as the original 1983 release.
- Special Feature 6 Includes Hobbywing 1060
- Suspension Fully independent double wishbone
- Terrain Use On-Road
Specifications:
- Length: 345mm
- Width: 210mm
- Height: 165mm
- Wheelbase: 185mm
- Tread: 165mm (Front), 170mm (Rear)
- Tire Width/Diameter: 35/70mm (Front), 42/70mm (Rear)
- Resin Monocoque Frame
- Rear-Wheel 2WD
- 4-Wheel Double Wishbone Suspension
- Front/Rear Friction Dampers
- 2-Piece Steering Tie Rod
- 3-Bevel Differentials
- Gear Ratio: 16.5:1
- Torque-Tuned Motor
| Length: | 345mm |
| Width: | 210mm |
| Height: | 165mm |
| Wheelbase: | 185mm |
| Tire Width/Diameter (Front and Rear): | 35/70mm (Front), 42/70mm (Rear) |
| Chassis: | Resin Monocoque Frame |
| Transmission type: | Rear-Wheel 2WD |
| Differential type: | 3-Bevel Resin Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 16.5:1 |
| Motor: | Type 540 Torque-Tuned (included) |
Required Items (Sold Separately)
- 2 channel Transmitter/Receiver
- Steering Servo
- Electronic Speed Controller
- Paint
- 7.2-7.4volt Battery
- Charger
- AA Batteries for Transmitter
- Tamiya PS paints
- Tools
Updated release of a Tamiya classic
Tamiya 1/10 BMW M4 GT3 Evo (TT-02) (TAM 58751)
This R/C assembly kit depicts the BMW M4GT3 EVO as it raced in 2025 FIA World Endurance Championship (WEC) in the LMGT3 class used by both customer and works teams. The all-new polycarbonate body featured in this kit is paired with the fun and easy to build TT-02 chassis.
The M4GT3 EVO is used by top teams in the WEC series, including the works factory team co-piloted by renowned former MOTO GP champion Valentino Rossi. The livery used in this release depicts the show car livery when the car was unveiled to the public in its promotional debut. R/C fans can use the show car livery or use their imagination to create one of their favorite WEC racing teams.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability.
In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes.
It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios.
It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features:
Required to complete:
Specifications:
Required Items (Sold Separately)
The M4GT3 EVO is used by top teams in the WEC series, including the works factory team co-piloted by renowned former MOTO GP champion Valentino Rossi. The livery used in this release depicts the show car livery when the car was unveiled to the public in its promotional debut. R/C fans can use the show car livery or use their imagination to create one of their favorite WEC racing teams.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability.
In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes.
It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios.
It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features:
- 1/10 scale R/C model assembly kit. Length: 443mm, width: 188mm, height: 132mm. Wheelbase: 257mm
- Lightweight, rigid 1mm thick polycarbonate body with separate polycarbonate front and rear light cases add three-dimension depth (Note: LED lights are not attachable) and rear wing.
- Separate black ABS plastic parts realistically depict side mirrors and rear wing stays.
- Newly designed black 5-spoke wheels (offset +2) accurately depict those on the actual car. They are paired with racing slick tires.
- The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.
- Includes Item 51019 Urethane Bumper (TT-01, TGS) to keep the body in top condition.
- The kit features pre-cut wheel arches and pre-made body mount holes.
- Includes window masking stickers for use in the painting process.
- Includes 540-Type Torque Tuned motor and ESC.
Required to complete:
- 2-channel radio
- steering servo
- 7.2-7.4volt battery with compatible charger
- Tamiya PS paints
- Tools
Specifications:
| Length: | 443mm |
| Width: | 188mm |
| Height: | 132mm |
| Wheelbase: | 257mm |
| Tire Width/Diameter (Front and Rear): | 27/67mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Shaft-Driven Full-Time 4WD |
| Differential type: | Front/Rear 4-Bevel Resin Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Great Choice for TT-02 Spec Racing
Tamiya 1/14 R/C BUGGYRA FAT FOX Kitset (TT-01E) (TAM 58661)
This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
TT-01E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
Specifications:
Required Items (Sold Separately)
TT-01E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
- 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm.
- The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape.
- Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper.
- Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko.
- Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models.
- Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit.
- The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability.
- TT-01 Type-E chassis Hop-Up Options available.
- Includes 540-Type Brushed motor.
- Electronic Speed Controller included.
Specifications:
| Length: | 420mm |
| Width: | 187mm |
| Height: | 188mm |
| Tire Width/Diameter: | 28/70mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD |
| Differential type: | F/R 3-Bevel Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.35:1 |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Realistic Looking Racing Truck
Tamiya 1/10 R/C FIAT 131 ABARTH RALLY: MF-01X (TAM 58723)
This R/C model assembly kit recreates the classic FIAT 131 Abarth Rally Olio Fiat on the easy to assemble and drive MF-01X rally chassis platform. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori which made its debut in 1976 and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
Specifications:
Required Items (Sold Separately)
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
- 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
- The body is breathtakingly recreated in durable, lightweight polycarbonate.
- Separately molded plastic components recreate side mirrors and rear wings.
- The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Polycarbonate light cases are compatible with separately sold 5mm LEDs.
- Stickers are included to recreate body details and logos.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Specifications:
| Length: | 400mm |
| Width: | 180mm |
| Height: | 132mm |
| Wheelbase: | 239mm (L-size wheelbase) |
| Transmission type: | 4WD |
| Differential type: | Gears |
| Suspension type: | Fully Independent Double Wishbone |
| Damper: | Friction type |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
This kit depicts the Olio Fiat’s livery.
Tamiya 1/10 R/C FIAT ABARTH 1000 TCR: MB-01 (TAM 58721)
The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
Specifications:
Required Items (Sold Separately)
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
- The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
- Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
- Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
- The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
- While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
- Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
- Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
- Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
- Includes 540 motor and ESC.
Specifications:
| Length: | 322mm |
| Width: | 163mm |
| Wheelbase: | 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup). |
| Transmission type: | 2WD |
| Differential type: | Gears |
| Gear ratio: | 5.83:1 (when using kit-standard 29T pinion gear) |
| Suspension type: | 4-wheel double wishbone suspension features symmetrical structure |
| Damper: | Friction type |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Can be run FWD or RWD
Tamiya 1/10 R/C ALFA ROMEO GIULIA SPRINT: MB-01 (TAM 58732)
The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front or rear wheel drive system.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front or rear wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
Required Items (Sold Separately)
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front or rear wheel drive system.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front or rear wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L)
- The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
- Features 60mm front and rear tires.
- This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
- Includes 540-Type brushed motor.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Can be run FWD or RWD
Tamiya 1/10 R/C Volkswagen Beetle Rally: MF-01X (TAM 58650)
This R/C model assembly kit recreates the classic Volkswagen Beetle in rally racing form. Thanks to its superlative reliability and uncomplicated upkeep, it was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. The VW body sits atop Tamiya’s proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
Specifications:
Required Items (Sold Separately)
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
- 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
- The body is breathtakingly recreated in durable, lightweight polycarbonate.
- Separately molded plastic components recreate side mirrors and rear wings.
- The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Polycarbonate light cases are compatible with separately sold 5mm LEDs.
- Stickers are included to recreate body details and logos.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Specifications:
| Length: | 400mm |
| Width: | 180mm |
| Height: | 132mm |
| Wheelbase: | 239mm (L-size wheelbase) |
| Transmission type: | 4WD |
| Differential type: | Gears |
| Suspension type: | Fully Independent Double Wishbone |
| Damper: | Friction type |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Classic Volkswagen Beetle in rally racing form
Tamiya 1/10 RC Mini Cooper Racing: MB01 (TAM 58747)
The Legend Lives On
About 5.3 million units of the Mini were produced from 1959 until 2000 - remarkably without major model changes - and this legendary little car even achieved second place in the Car of the Century award for the best cars of the 20th century. Its front-wheel drive layout was rare for its time, and it featured ergonomic body structure with compact mechanics and maximum interior space, as well as frisky performance.
In 1961, the sporty Mini Cooper joined the line-up and with great racing success, the car gained even greater popularity around the world. This assembly kit creates a radio control model assembly kit depicting the car, with stickers included for the bonnet stripes, body-side pinstripes and racing numbers. 8-spoke wheels are paired with 60D radial tires.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a front-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone
Specifications:
Required Items (Sold Separately)
About 5.3 million units of the Mini were produced from 1959 until 2000 - remarkably without major model changes - and this legendary little car even achieved second place in the Car of the Century award for the best cars of the 20th century. Its front-wheel drive layout was rare for its time, and it featured ergonomic body structure with compact mechanics and maximum interior space, as well as frisky performance.
In 1961, the sporty Mini Cooper joined the line-up and with great racing success, the car gained even greater popularity around the world. This assembly kit creates a radio control model assembly kit depicting the car, with stickers included for the bonnet stripes, body-side pinstripes and racing numbers. 8-spoke wheels are paired with 60D radial tires.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a front-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone
Specifications:
| Length: | 315mm |
| Width: | 167mm |
| Height: | 140mm |
| Wheelbase: | 210mm (Short) |
| Transmission type: | Front-wheel drive |
| Suspension: | 4-wheel double wishbone |
| Motor: | Includes a 540-type motor |
| Tread: | 140mm (front & rear) |
| Tire width/diameter: | 25/59mm (front and rear) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
- Paint
- Tools to assemble
The iconic Mini Cooper returns
Tamiya 1/14 R/C Team Hahn Racing MAN TGS Kitset (TT-01) (TAM 58632)
Hahn-tastic!!!
This is an exciting R/C model assembly kit recreating the Team Hahn Racing MAN TGS truck which stars on the truck racing circuit in Europe.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated new wheels and tires for the model.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
Specifications:
Required Items (Sold Separately)
This is an exciting R/C model assembly kit recreating the Team Hahn Racing MAN TGS truck which stars on the truck racing circuit in Europe.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated new wheels and tires for the model.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
- Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
- Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
- Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
- The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
- The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.
Specifications:
| Length: | 438mm |
| Width: | 190mm |
| Height: | 207mm |
| Wheelbase: | 257mm |
| Tire Width/Diameter: | 28/70mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD |
| Differential type: | F/R 3-Bevel Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.35:1 |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Realistic Looking Racing Truck
Out of Stock
$274.95 Inc Tax
Tamiya 1/14 R/C Reinhert Racing MAN TGS Kitset (TT-01) (TAM 58642)
REINERT's Rampaging Racer
This is an exciting R/C model assembly kit recreating the Team REINERT Racing MAN TGS truck which starred on the 2016 European truck racing circuit.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
Stickers are included in the kit to recreate the truck's numerous sponsor markings and logos, etc. The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated racing truck model wheels and tires.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
Specifications:
Required Items (Sold Separately)
This is an exciting R/C model assembly kit recreating the Team REINERT Racing MAN TGS truck which starred on the 2016 European truck racing circuit.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
Stickers are included in the kit to recreate the truck's numerous sponsor markings and logos, etc. The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated racing truck model wheels and tires.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
- Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
- Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
- Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
- The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
- The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.
Specifications:
| Length: | 438mm |
| Width: | 190mm |
| Height: | 207mm |
| Wheelbase: | 257mm |
| Tire Width/Diameter: | 28/70mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD |
| Differential type: | F/R 3-Bevel Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.35:1 |
| Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Realistic Looking Racing Truck
Out of Stock
$274.95 Inc Tax
Tamiya 1/10 RC Ford Mustang GT4 Kitset (TT-02) (TAM 58664)
Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tire SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.
The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!
TT-02 Chassis:
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features:
Specifications:
Required Items (Sold Separately)
The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!
TT-02 Chassis:
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features:
- 1/10 scale R/C model assembly kit. Length: 459mm.
- Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate.
- Wheel arches are pre-cut out for a simpler body assembly experience.
- The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.
- Separately molded plastic components depict rear wing and side mirrors.
- Racy 10-spoke wheels are molded in gun metal and paired with slick tires.
- Stickers are included to create an original livery, as are masking stickers for use when painting.
- Includes Tamiya Torque Tuned Motor.
- Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit.
Specifications:
| Length: | 459mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Shaft-Driven Full-Time 4WD |
| Differential type: | Front/Rear 4-Bevel Resin Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) |
| Motor: | Type 540 motor (included) |
| Electronic speed Controller: | Included |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
30th Anniversary Model
Tamiya 1/10 R/C 190 E EVO 2 Zakspeed TT-01E (TAM 58638)
A Classic Returns!
1992 was another great year of racing in the German Touring Car Championship (DTM), with rival cars from major makers Mercedes-Benz, Audi and BMW taking one another on. This R/C model assembly kit depicts the Mercedes-Benz 190 E 2.5-16 EVO.II car fielded in 1992 by Team Zakspeed.
It features an accurate polycarbonate body reproduction of the 190 E form with overfenders and front spoiler, plus separate polycarbonate wing parts. Metal-plated components recreate the famed Mercedes emblem and front grille, with separately molded plastic parts depicting side mirrors. Stickers are included to depict numerous logos (including main sponsor Diebels Alt), car numbers and more!
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Specifications
Separately Required Items
1992 was another great year of racing in the German Touring Car Championship (DTM), with rival cars from major makers Mercedes-Benz, Audi and BMW taking one another on. This R/C model assembly kit depicts the Mercedes-Benz 190 E 2.5-16 EVO.II car fielded in 1992 by Team Zakspeed.
It features an accurate polycarbonate body reproduction of the 190 E form with overfenders and front spoiler, plus separate polycarbonate wing parts. Metal-plated components recreate the famed Mercedes emblem and front grille, with separately molded plastic parts depicting side mirrors. Stickers are included to depict numerous logos (including main sponsor Diebels Alt), car numbers and more!
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Specifications
- Length:445mm
- Width: 184mm
- Height: 137mm
- Wheelbase: 257mm
- Tire Width/Diameter: 27/67mm
- Bathtub Type Chassis Frame
- Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD
- F/R 3-Bevel Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- F/R Friction Dampers
- Gear Ratio=8.35:1
- Type 540 Motor
Separately Required Items
- Electronic Speed Controller
- 2-channel R/C system
- Battery pack and charger
- Batteries for transmitter
Diebels Alt livery
Out of Stock
$274.95 Inc Tax
Tamiya 1/10 RC 1992 Audi V8 Touring Kitset (TT-02) (TAM 58699)
This Tamiya R/C kit recreates the classic 1992 Audi V8 Touring from 1992. We have faithfully recreated this classic racing car with a detailed polycarbonate body and mated it with our entry-level and user-friendly TT-02 chassis.
About the Audi V8 Touring:
The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Specifications:
Required Items (Sold Separately)
About the Audi V8 Touring:
The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Specifications:
| Length: | 463mm |
| Width: | 188mm |
| Height: | 138mm |
| Wheelbase: | 257mm |
| Chassis: | Bathtub Type Chassis Frame |
| Transmission type: | Shaft-Driven Full-Time 4WD |
| Differential type: | Front/Rear 4-Bevel Resin Differentials |
| Suspension: | 4-Wheel Double Wishbone Suspension |
| Gear Ratio: | 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) |
| Motor: | Type 540 motor (included) |
| Electronic speed Controller: | Included |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- ESC
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Great Choice for TT-02 Spec Racing
Tamiya 1/10 R/C 190E Team Zakspeed DEBIS: TT-01E (TAM 58656)
This is a classic Mercedes race car from the early 1990’s. It replicates the iconic 190 E 2.5-16 Evo.II. The livery in this kit faithfully replicates the colors of the Team Zakspeed car which ran in the 1991 DTM. Of special historical racing note; in races 6 and 7 of the season, the no.20 car was piloted by a young Michael Schumacher, who later went on to win 7 Formula One World Championships. The main sponsor of the car was Daimler-Benz’s now-defunct group company Debis.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Features:
Separately Required Items
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Features:
- 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm.
- Body is made of durable polycarbonate, with separate molded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-pointed star emblem.
- Marking stickers included to recreate sponsor logos and numbers on the No.20 car.
- 6-spoke wheels are molded in soft green and paired with slick tires.
- The TT-01 Type-E chassis features shaft-driven 4WD system and full independent suspension that offers easy handling and great customizability.
Separately Required Items
- 2-channel R/C system
- Electronic Speed Controller
- Battery pack and charger
- Batteries for transmitter
DEBIS livery
Out of Stock
$250.00 Inc Tax
Tamiya 1/10 RC Concept Chassis Kit (M-07) (TAM 58647)
An M Revolution!
This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers a responsive drive and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly.
CVA oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, gear differential unit and universal drive shafts.
It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Features:
Specifications:
Required Items (Sold Separately)
This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers a responsive drive and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly.
CVA oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, gear differential unit and universal drive shafts.
It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Features:
- 1/10 scale R/C model assembly kit
- Monocoque frame chassis (with detachable lower section)
- Long suspension arms and steering linkage components optimize damper leverage ratio
- The chassis' camber can also be adjusted
- Adjust the M-07 Concept's rear toe angle via the insertion of spacers where the suspension mount parts are attached
- One of the key points is the easy-access gear differential unit, which can be removed and changed from the underside
- CVA oil dampers
- Full ball bearings
- Enjoy silky-smooth power from your chassis thanks to full ball bearings, universal drive shafts and gear differential unit
Specifications:
- Length: 332mm (including bumper)
- Width: 164mm
- Wheelbase: 225mm or 239mm (Selectable)
- Monocoque Frame
- Front-Midship Motor, Front-Wheel Drive
- Gear Differential
- 3-Piece Steering Tie-Rod
- 4-Wheel Independent Double Wishbone Suspension
- CVA Oil Dampers
- Gear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears)
- Requires an Electronic Speed Controller (sold separately)
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- M-Chassis Body
- Paint
- AA Batteries for Transmitter
A true little race kit
Tamiya 1/10 RC ALPINE A110 JAGERMEISTER 1973 Kitset (M-06) (TAM 58708)
A Class Act
The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained motor racing fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first world rally champion and its J?germeister orange version achieved a class victory in German circuit races. This is an R/C model assembly kit of such an Alpine A110, its polycarbonate body realistically capturing the distinctive 2-door coupe form in style. Stickers are included to recreate sponsor logos, race numbers and more. The model uses the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rear-mounted motor.
Great RR Performance from the M-06:
The M-06 chassis features a rear-mounted motor, rear-drive setup and has a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses gray colored wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.
Specifications:
Required Items (Sold Separately)
The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained motor racing fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first world rally champion and its J?germeister orange version achieved a class victory in German circuit races. This is an R/C model assembly kit of such an Alpine A110, its polycarbonate body realistically capturing the distinctive 2-door coupe form in style. Stickers are included to recreate sponsor logos, race numbers and more. The model uses the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rear-mounted motor.
Great RR Performance from the M-06:
The M-06 chassis features a rear-mounted motor, rear-drive setup and has a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses gray colored wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.
Specifications:
- Length: 395mm
- Width: 168mm
- Height: 121mm
- Wheelbase: 210mm
- Tread (front/rear): 138mm
- Rear-motor, rear-wheel drive
- 3-bevel differential gear
- 3-piece steering tie-rod
- 4-wheel independent double wishbone suspension
- Front/rear friction dampers
- Gear ratio = 5.8:1 (using kit-standard 20T pinion)
- Tire width/diameter (front/rear): 25mm/59mm
- Type 540 motor
Required Items (Sold Separately)
- Transmitter/Receiver
- Electronic Speed Controller
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Rear Wheel Drive M-06 kit
- 1