Brushed ESC's

This is the TBLE-04S Electronic Speed Controller from Tamiya that is Compatible with brushed and brushless motors.

This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.

High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.

Setup is shown by an LED, and the ESC also features two protection functions.

Spcifications:

• Maximum continuous current: 75A
• Input voltage: 6.6V - 7.2V
• Dimensions: 41.5mm x 33.4mm x 18mm
• Weight: 45g (including cables)

Features:

• Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
• Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
• Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
• Features overheating and overload protection functions to help ensure that your equipment avoids damage.
• Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.

LO/HI Battery Cut-off Information:

• LOW & HIGH Battery Low Voltage Protection Feature:
  • LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
  • HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

This is the 800 Series 80A V2 Brushed ESC With LED Program Card from Orca.

The reliable hardware combined with powerful software (features an array of programmable parameters like start force, drag brake rate, and etc.) creates an ideal power solution to 1/10th, 1/8th rock crawlers but is equally a reliable, powerful option for other 1/10 brushed motor applications.


Features:

• For: 1/10 RC
• Material: Aluminum / Plastic
• Color: Black
• Super Small Size
• Upgraded High Output 5A BEC
• Aluminum Bottom Case
• Waterproof
• 80A High Current Output
• LED Program Card

Specifications:

• Size: 29x34.8x10.2mm
• XT60 Plug for battery connection
• Weight: 20g
• Input Voltage: 6-12.6V (2-3S LiPo)
• Peak Current: 400A
• Continuous Current: 80A
• Motor Type: 540 and 550 size Brushed Motors
• B.E.C.: 5A/6V

This is the TEU-201BK Twin Motor Electronic Speed Controller from Tamiya that is Compatible with brushed motors.

This ESC is designed for dual motor builds and features smooth, predictable power output.


Specifications:

• Maximum continuous current: 80A
• Input voltage: 6.6V - 7.2V
• Dimensions: 45.9mm x 34.7mm x 26.5mm
• Weight: 75g (including cables)
• Output – Forward 100%, reverse 50%
• Tamiya JST type battery connector

This is the QuicRun 80A WP-1080 G2 ESC from Hobbywing.

The reliable hardware combined with powerful software (features an array of programmable parameters like start force, drag brake rate, and etc.) creates an ideal power solution to 1/10th, 1/8th rock crawlers but is equally a reliable, powerful option for other 1/10 brushed motor applications.

Features:

• Fully Water-proof and dust-proof, suitable for all-weather races.
• Small in size, with a built-in capacitor module.
• Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV)
• In the first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
• Real-Time Adjustment of Drag Braking Force.
• 15 programmable parameter items
• PWM Frequency: 1K/2K/4K/8K/16K Adjustable
• Freewheeling (DEO) capability
• Drag brake rate in 9 levels (adjustable)
• Electronic switch
• Aluminum case for great heat dissipation
• Great current endurance capability. 
• Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V
• Automatic throttle range calibration, easy to use.
• Multiple protections:
• Over Voltage Protection
• Low voltage cut-off protection for battery
• Over-heating protection
• Throttle signal loss protection, and much more

Specifications:

• Continuous / Peak Current: 80A/400A
• Voltage Range: 2-3S Lipo or 5-9 NiMH
• Cars Applicable:1/10 Touring Car / Buggy / SCT / Monster / Crawler
• Battery: 2-3S LiPo or 5-9S NiMH
• Size: 37.2 x 31.9 x 18.4mm
• Weight: 70.2g including wire and connectors
• Separate Programming Port
• LED Program Box
• PWM Frequency: Adjustable 1K/2K/4K/8K/16K
• BEC Output 6V/7.4V @ 3A (switch mode)
• Adjustable Reverse/Brake Force
• LED program box supported
• Brushed Motors (540/550 Series of Motors)

WP-1080 G2 ESC VS WP-1080 (G1)

• BEC output can go up to 8.4V
• Real-Time Adjustment of Drag Braking Force.
• Real Car Mode
• New Aluminum case

This is a waterproof, brushed ESC by Dynamite which is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes.

Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

Features: 

• 2-3S LiPo compatible
• 5-9 cell NiMH compatible
• Removable mounting tabs
• Crawler Mode
• Small footprint for mounting flexibility
• LiPo safety cutoff

BEC Voltage:	5V
Full On Resistance:	.0008 ohms
Auto Cutoff:	Yes
BEC:	Yes
BEC Continous Current:	2A
BEC Type:	Linear
Battery Input Lead:	16AWG, 115mm
Brakes:	Yes
Drive Type:	Forward/Brake/Reverse
Forward:	Yes
Input Connector Types:	EC3
Input Voltage:	2-3S Lipo, 5-9 cells NiMH/NiCd
Low-Voltage Cutoff Programmable:	Yes
Reverse:	Yes
Speed Control Type:	Brushed
Time Delay Brake:	Yes

NOTE: While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.

This is the QuicRun 60A WP-1060 ESC from Hobbywing.

Features:

• Waterproof and dust-proof, suitable for all-weather condition races
• Small size with built-in capacitor module
• Three running modes:
  • Forward/Brake,
  • Forward/Reverse/Brake
  • Forward/Reverse
• Built-in BEC output capacity
• Automatic throttle range calibration, easy to use
• Easy to set the ESC parameters with jumpers
• Multiple protections:
  • Low voltage cut-off protection for battery
  • Over-heat protection
  • Throttle signal loss protection

Specifications:

• Fwd. Cont. / Peak Current: 60A/360A
• Rev. Cont. / Peak Current: 30A/180A
• Voltage Range: 2-3S Lipo or 4-9 NiMH
• Cars Applicable:1/10 Touring Car / Buggy / SCT / Monster / Crawler