Brushless ESC's
This is the Third generation Z8 PRO 1/8 Competition Gen3 Brushless ESC from REDS Racing.
The new 220A ESC came into existence with the notion from REDS Racing that they can create the best ESC there is. They never stop looking at what is possible in determining how to achieve high performance and reliability. Therefore, a new platform was created. The ESC was designed based on driver feedback, years of testing, the demands of racing and making sure that there were no compromises.
The New ESC features a new Built-In Communication Protocol for quick setup of parameters, firmware upgrades since they recently developed REDS Racing iOS and Android App. After downloading Reds App and connecting REDS ESC to your phone you can control your ESC (Throttle, Power, Voltage, Current, Temperature, RPM, Timing…) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. You can say goodbye to old devices such as program cards and so on.
Main Features:
- 1:8 Scale Buggy, Truggy, GT and On Road
- 2-4 Cell LiPo / 220 Amp
- Built in Communication Protocol allows programming via Apple or Android App
- 32 Bit high performance CPU
- Ultra-Low Resistance FET Board
- BEC Output: 6.0V , 7.4V , @6A
- Sensored: Yes (Sensorless not recommended)
- Motor Limit: 3000 KV @ 4S LiPo
- Dimensions LxWxH: 55x40x37 mm
APP DOWNLOAD:
This is the Firma 150 Amp Sensorless Brushless Smart ESC & 2050Kv Motor Combo from Spektrum.
Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Spektrum Smart electronics.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity*. Firma ESCs not only gather the data, but also send it to your Smart compatible transmitter in real time, allowing the ability to adjust settings as needed to boost performance on the go.
This ESC comes bundled with a Spektrum Firma 2050Kv Brushless Motor capable of handling everything this ESC can put out that is a perfect to get you driving with Spektrum Smart technology.
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
Features:
- Smart all-in-one telemetry*
- Fast, powerful 32-bit ARM M4 processor
- Waterproof
- Multiple options for easy programming:
- Multi-point protection:
- Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
- Comes bundled with Spektrum Firma 2050Kv Brushless Motor
- Compact for easy installation in most applications
- Ready to install — no soldering required
- Rugged plastic case with mounting tabs
- Aluminum heat sink for high efficiency
- Cooling fan
- Adjustable high-power BEC
- Firmware updatable through the Smart ESC Programming Box
- High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
- Limited 1-year warranty
Specifications:
- Auto Cutoff: Yes
- BEC: Yes
- BEC Continous Current: 5A
- BEC Type: Linear
- BEC Voltage: 6V
- Battery Connector: IC5
- Bearings or Bushings: Bearings
- Brakes: Yes
- Cells: 3-6S LiPo
- Efficiency: 86%
- Forward: Yes
- Height: 38.5mm, ESC
- Input Voltage: 11.1 - 22.2V (25.2V max)
- Length 58mm, ESC
- Low-Voltage Cutoff Programmable: Yes
- Maximum Burst Current: 950A
- Maximum Continuous Current: 150A
- Motor Connector: 4mm Female Bullet
- Motor Output Lead: 150mm 10AWG
- Motor Type: Brushless sensorless
- Number of Poles: 4
- Output: 3000W,4940A (6S)
- Overload Protection: Yes (Thermal protection as well)
- RPM/Volt (Kv): 2050,2050Kv
- Reverse: Yes
- Sensored: No
- Weight: 238g, ESC,
- Width: 47.5mm without tabs, 59.5mm with tabs, ESC
- 1xSpektrum™ Firma™ Smart ESC
- 1x Spektrum™ Firma™ 2050Kv Brushless Motor
- 1x Spektrum Smart sticker sheet
- 1x Product Manual
Needed to Complete:
- LiPo Battery w/EC5 or Spektrum Smart Battery w/IC5 connector*
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
This is the Firma 130 Amp Sensorless Brushless Smart ESC & 1900Kv Motor Combo from Spektrum.
Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Spektrum Smart electronics.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity*. Firma ESCs not only gather the data, but also send it to your Smart compatible transmitter in real time, allowing the ability to adjust settings as needed to boost performance on the go.
This ESC comes bundled with a Spektrum Firma 1900Kv Brushless Motor capable of handling everything this ESC can put out that is a perfect to get you driving with Spektrum Smart technology.
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
Features:
- Smart all-in-one telemetry*
- Fast, powerful 32-bit ARM M4 processor
- Waterproof
- Multiple options for easy programming:
- Multi-point protection:
- Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
- Comes bundled with Spektrum Firma 1900Kv Brushless Motor
- Compact for easy installation in most applications
- Ready to install — no soldering required
- Rugged plastic case with mounting tabs
- Aluminum heat sink for high efficiency
- Cooling fan
- Adjustable high-power BEC
- Firmware updatable through the Smart ESC Programming Box
- High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
- Limited 1-year warranty
Specifications:
- Auto Cutoff: Yes
- BEC: Yes
- BEC Continous Current: 4A
- BEC Type: Linear
- BEC Voltage: 6V
- Battery Connector: IC5
- Battery Input Lead: 160mm 12AWG
- Bearings or Bushings: Bearings
- Brakes: Yes
- Cells: 3-6S LiPo
- Connector Type: D4
- Efficiency: 86%
- Forward: Yes
- Height: 38mm, ESC
- Input Voltage: 11.1 - 22.2V (25.2V max)
- Length 57mm, ESC
- Low-Voltage Cutoff Programmable: Yes
- Maximum Burst Current: 760A
- Maximum Continuous Current: 130A,60A
- Motor Connector: 4mm Female Bullet
- Motor Output Lead: 150mm 12AWG
- Motor Type: Brushless sensorless
- Number of Poles: 4
- Output: 3000W,4940A (6S)
- Overall Diameter: 42mm, motor
- Overall Length: 74 mm, motor
- Overload Protection: Yes (Thermal protection as well)
- RPM: 29100 @ 15V
- RPM/Volt (Kv): 1900,1900Kv
- Reverse: Yes
- Sensored: No
- Shaft Diameter: 5 mm
- Shaft Length: 18.5 mm
- Weight: 126g, ESC,416g, motor
- Width: 37mm, ESC
- 1xSpektrum™ Firma™ Smart ESC
- 1x Spektrum™ Firma™ 1900Kv Brushless Motor
- 1x Spektrum Smart sticker sheet
- 1x Product Manual
Needed to Complete:
- LiPo Battery w/EC5 or Spektrum Smart Battery w/IC5 connector*
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
This is the Xerun XR8 Pro G3 1/8 Competition Sensored Brushless Electronic Speed Controller from Hobbywing.
Loaded with cutting-edge technologies and features, this 1/8 competition ESC is designed to provide a higher level of performance and reliability for all competitive racers looking for the ultimate smooth control and supreme power you'd come to expect from Hobbywing!
For added protection, this ESC is equipped with advanced thermal protection and reverse polarity protection. These advancements allow for an ESC that is designed to outperform the competition
NOTE: Use appropriate settings provided by the factory or team drivers. Check the operating temperature in order to maximize your electronics. The wrong settings may damage the ESC or motor.
Features:
- Smart freewheeling technology enables the ESC to have higher drive efficiency and lower operating temperature
- Compared with the XR8 Pro G2, the maximum temperature is reduced by approximately 59F
- Dual brake mode
- Advanced Turbo and Boost timing technology
- Built-in reverse polarity protection circuit
- Real-time data recording function, easy to obtain power running status
- Capacitor thermal protection is designed and implemented into the ESC and will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload
- Superior dustproof protection
- Custom ultra-soft 11AWG silicone wire
- Frameless fan blade is designed with specially formulated material to reduce the defective rate of the fan caused by impact from small stones, sand and other foreign objects
- Intelligent fan with noise reduction and power saving functions
Specifications:
- Current: Continuous 200A, Burst:1080A
- Input: 2-4 LiPo
- Built-in BEC: 6V / 7.4V Adjustable
- ESC Programming: Yes, Via OTA Programmer or LCD G2 Program Box
- Motor Supported: Sensor and sensorless brushless motor
- Motor KV Limit:
- 3S LiPo: KV= 4000 3660 Size motor
- 4S LiPo: KV= 3000 4268 Size motor
- Suitable Cars: 1/8 Off-road, On-road Racing & 1/10th Short course & Monster truck
- Braking mode: FOC/BLDC
- Dimensions: 54.8 x 38.8 x 36.8mm
- Weight: 102.8g (w/o wires, cooling fan)
Package includes:
- 1x Xerun XR8 Pro G3 1/8 Competition Sensored Brushless ESC
- 1x Factory Decals and Accessories
Hobbywing XERUN XR10 Justock G3 ESC & G2.1 25.5 Turn Motor
The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 25.5T motor is an ideal choice for vintage trans am, formula and other on-road racing classes. These two components paired together make for an ideal choice for beginners and experts alike.
Features:
- ESC:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Bluetooth module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- Supports ESC firmware upgrades
- User-friendly and convenient for set-up
- Motor:
- Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
- Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
- Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
- Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
- This Justock motor is applicable to various 1/10th, 1/12th on-road Stock Spec Racing, ICC, IOCC, USVTA, TOUR, Oval racing. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
- The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:
- ESC:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater, 3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- Motor:
- Scale: 1/10, 1/12
- Brushless: Yes
- Sensored: Yes
- Pole Count: 2
- KV Rating: 1600
- LiPo Cells: 2-3S
- No-Load Current(A): 2.8
- Outer Diameter: 35.9mm
- Length: 52.5mm
- Shaft Diameter: 3.17mm
- Weight: 173g
- Timing: Fixed
Includes:
- 1x Justock G3 ESC
- 1x Justock 25.5t G2.1 brushless motor
- 1x 5V cooling fan
- 1x Sensor cable
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
- Maximum continuous current: 75A
- Input voltage: 6.6V - 7.2V
- Dimensions: 41.5mm x 33.4mm x 18mm
- Weight: 45g (including cables)
Features:
- Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
- Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
- Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
- Features overheating and overload protection functions to help ensure that your equipment avoids damage.
- Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.
LO/HI Battery Cut-off Information:
- LOW & HIGH Battery Low Voltage Protection Feature:
- LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
- HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)
This is the Xerun XR10 Justock G3S 1/10 Sensored Brushless Electronic Speed Controller from Hobbywing.
ESC Overview:
The Xerun XR10 Justock G3S 1/10 Sensored Brushless ESC is a versatile and reliable electronic speed controller designed for competitive RC racing. It features built-in polarity protection to prevent damage from reverse battery connections, ensuring system safety. With programmability options via OTA Wireless module or 3in1 program box, users can easily customize settings to suit their racing preferences. Additionally, its RPM speed limit function offers flexibility with up to 6 different speed selections, catering to various competition requirements worldwide. The ESC also incorporates a built-in capacitor module, eliminating the need for external capacitors and saving space.
Features:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Wireless module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
- Built-in data logging for post-run reports
Specifications:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater,3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- ROAR Approval: Yes
Includes:
- 1x Justock G3SS ESC
- 1x 5V cooling fan
Over-The-Air Programming Device fits in your pocket
OTA Programmer is a module which adopted the Bluetooth communication technology for transferring data between an ESC and a smart device (Android phone, tablet, and etc). It makes the wireless communication between ESC and smart device possible; the user can easily program and upgrade ESC and monitor data transferring via this unit.
Features / Why you need this?
- HOBBYWING over-the-air firmware update.
- Programming through a smartphone, smart devices
- Access to HW Support* User Manual, Profile manager, etc
- Fail-safe feature (Disable a throttle control when OTA programming is enabled)
*Recommend removing the unit before the official event.
The OTA Programmer module works with the following products of HOBBYWING.
- Some of XERUN series & EZRUN series of car ESCs.
- Some of PLATINUM series of aircraft ESCs.
- Some of SEAKING series of boat ESCs.
- For details, please refer to ESC manual to ensure if the ESC can work with OTA Programmer.
Specification:
- Working Voltage: 5V-12.6V
- Supported Bluetooth Version : ≥ 4.0
- Effective Range: 0-3m (Open Field)
- Size (LxWxH): 30.0x25.5x8.5mm
- Weight: 10.2g
- Apps: HW Link V2
Set, review, adjust and save the operating parameters of your Avian and Firma electronic speed controls using the Spektrum Smart ESC Programmer. When connected to a PC using the included USB cable, the programmer will update Smart ESC firmware and can adjust parameters through the Spektrum SmartLink app. You can also use it to check the balance of your LiPo battery cells.
Smart Technology — More connected for more confidence and control
Spektrum™ Smart Technology is about offering a higher connection to your hobby. It's an RC ecosystem that puts you in complete control while making vital components of your model easier to use than ever before. Smart technology ensures that all of your model's electronics work together seamlessly for the greatest efficiency and performance. It keeps you aware of every component's status, boosts your confidence in its capabilities, and makes your entire system more responsive and simple to use.
Spektrum radios with Smart features can download firmware updates instantly using Wi-Fi and can swap setups with compatible radios via Bluetooth. Spektrum Smart LiPo batteries have a built-in microchip that records and communicates your charging preferences automatically to Smart chargers — just connect your pack and press "Start." Smart IC™ series connectors include an innovative data wire that transfers information easily between Smart components with a single connection. Finally, Smart ESCs not only deliver power but also eliminate the hassles from running telemetry. The days of installing and connecting multiple wires, sensors, modules and links are over.
Features:
- Review, adjust and save Spektrum Smart ESC parameters
- Connect (via USB) to a PC to update Smart ESC firmware and adjust parameters via Spektrum SmartLink PC app
- Check a LiPo battery's cell balance
Needed to Complete:
- Compatible Spektrum™ Smart ESC
- PC with internet access
- 1x Smart ESC Programmer
- 1x USB Cable
- 1x ESC Cable
- 1x Product Manual
- 1