1/10th Brushless ESC's
Reds Racing announces the all new 160A ZX PRO ESC for 1/10 RC car racing. After a year of continuous development, REDS has reached a new benchmark in high-performance speed controls for the 1/10 racing market.
The new ZX PRO ESC came to existence with notion that we can create the best ESC there is. We never stop looking at what is possible in determining how to achieve high performance and reliability. Therefore, a new platform was created. The ESC was designed based on driver feedback, months of testing, the demands of racing and making sure that there was no compromises.
High power output: continuous current of 160A guarantees a stable and high power output during competition; New Algorithms for exceptional throttle and braking. Reds Racing ZX Pro ESC features not only a fastest hardware, but it also has a redesigned algorithm firmware to improve its strength and guarantee the smoothest throttle, accurate and precise braking; The new model is lighter (95g with cable) and more compact compared to its previous version; New programming functions are now available.
| Categories | Stock (Blinking mode) and Modified |
|---|---|
| Functions | Forward/Brake and Forward/Brake/Reverse |
| Current Continuous | 160 A |
| Current Burst | 1200 A |
| lnput | 4-8 cells NiMh/NiCd or 2S LiPo, 2S LiFe |
| Supported Motors | 540 size 2 pole sensored brushless |
| Suitalble Motor | Over 3.5T |
| BEC Output | 6V-7.4V |
| Size (LxWxH) | 30.6x30.1x19.6mm |
| Weight | 95g (with wires) |
Downloads:
Hobbywing XERUN XR10 Justock G3 ESC & G2.1 25.5 Turn Motor
The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 25.5T motor is an ideal choice for vintage trans am, formula and other on-road racing classes. These two components paired together make for an ideal choice for beginners and experts alike.
Features:
- ESC:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Bluetooth module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- Supports ESC firmware upgrades
- User-friendly and convenient for set-up
- Motor:
- Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
- Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
- Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
- Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
- This Justock motor is applicable to various 1/10th, 1/12th on-road Stock Spec Racing, ICC, IOCC, USVTA, TOUR, Oval racing. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
- The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:
- ESC:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater, 3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- Motor:
- Scale: 1/10, 1/12
- Brushless: Yes
- Sensored: Yes
- Pole Count: 2
- KV Rating: 1600
- LiPo Cells: 2-3S
- No-Load Current(A): 2.8
- Outer Diameter: 35.9mm
- Length: 52.5mm
- Shaft Diameter: 3.17mm
- Weight: 173g
- Timing: Fixed
Includes:
- 1x Justock G3 ESC
- 1x Justock 25.5t G2.1 brushless motor
- 1x 5V cooling fan
- 1x Sensor cable
The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continuous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc.
The 23.5g light Totem esc comes with temporary reverse polarity protection and integrated capacitors for a even smaller footprint.
Features:
- For: 1/10 Stock Class Racing
- Material: Aluminum
- Color: Black
- Reverse Polarity Protection
- Bulit-in Capacitor
- Super light weight (23.5g)
- Narrow Footprint of 25.8mm
- Central cable output at rear of ESC
Specifications:
- For: 1/10 RC Car
- Material: Aluminium
- Color: Black
- System: Brushless
- Dimensions: 23.5 (L) x 33.6 (W) x 17.6 (H) mm
- Weight: 23.5g (Excluding Wires)
- Voltage Input: 6V-8.7V
- Peak Current: 380A
- Continuous Current: 100A
- Motor Limit: Over 10.5T
- Motor Type: Sensored 540 Sized Brushless Motor
- BEC: 4A_6V/7V
- Multi Protection System: Yes
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
- Maximum continuous current: 75A
- Input voltage: 6.6V - 7.2V
- Dimensions: 41.5mm x 33.4mm x 18mm
- Weight: 45g (including cables)
Features:
- Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
- Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
- Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
- Features overheating and overload protection functions to help ensure that your equipment avoids damage.
- Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.
LO/HI Battery Cut-off Information:
- LOW & HIGH Battery Low Voltage Protection Feature:
- LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
- HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)
This is the Xerun XR10 Justock G3S 1/10 Sensored Brushless Electronic Speed Controller from Hobbywing.
ESC Overview:
The Xerun XR10 Justock G3S 1/10 Sensored Brushless ESC is a versatile and reliable electronic speed controller designed for competitive RC racing. It features built-in polarity protection to prevent damage from reverse battery connections, ensuring system safety. With programmability options via OTA Wireless module or 3in1 program box, users can easily customize settings to suit their racing preferences. Additionally, its RPM speed limit function offers flexibility with up to 6 different speed selections, catering to various competition requirements worldwide. The ESC also incorporates a built-in capacitor module, eliminating the need for external capacitors and saving space.
Features:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Wireless module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
- Built-in data logging for post-run reports
Specifications:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater,3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- ROAR Approval: Yes
Includes:
- 1x Justock G3SS ESC
- 1x 5V cooling fan
Over-The-Air Programming Device fits in your pocket
OTA Programmer is a module which adopted the Bluetooth communication technology for transferring data between an ESC and a smart device (Android phone, tablet, and etc). It makes the wireless communication between ESC and smart device possible; the user can easily program and upgrade ESC and monitor data transferring via this unit.
Features / Why you need this?
- HOBBYWING over-the-air firmware update.
- Programming through a smartphone, smart devices
- Access to HW Support* User Manual, Profile manager, etc
- Fail-safe feature (Disable a throttle control when OTA programming is enabled)
*Recommend removing the unit before the official event.
The OTA Programmer module works with the following products of HOBBYWING.
- Some of XERUN series & EZRUN series of car ESCs.
- Some of PLATINUM series of aircraft ESCs.
- Some of SEAKING series of boat ESCs.
- For details, please refer to ESC manual to ensure if the ESC can work with OTA Programmer.
Specification:
- Working Voltage: 5V-12.6V
- Supported Bluetooth Version : ≥ 4.0
- Effective Range: 0-3m (Open Field)
- Size (LxWxH): 30.0x25.5x8.5mm
- Weight: 10.2g
- Apps: HW Link V2
- This Programming Box will allow you to program the new ZX PRO ESC to allow you to tune it for your track and driving style.
- Allows you to connect your ESC to your PC for updates
Downloads:
This ESC Program Card incorporates the convenience and flexibility of user's own Micro SD card(not included).
With Micro SD technology, it is literally unlimited in storage. With use of Micro SD, download of ORCA's TEAM Drivers setups is greatly facilitated so user can "Drive like a Pro".
Firmware update becomes a breeze now eliminating any computer compatibility previously experienced in last version of Program Card (OPC111VS). Presence of USB Port option allows user to connect the programmer to the computer to download software to the Micro SD card.
This ORCA Program Card comes with a 200mm programming cable. The LCD display is 2-line dot matrix with blue backlit.
- 1