Futaba Receivers

This is the Noble NB4+ transmitter and FGr4B receiver from Flysky.


This product uses the 2.4GHz Third Generation AFHDS 3 protocol. The Noble NB4+ transmitter and FGr4B receiver constatute a system, compatible with model cars, boats and other models. and it also supports the USB simulator function (Default enabled).

Specification: 
Product Model: Noble NB4+
Compatible Receiver: All AFHDS 3 protocol receivers
Compatible Models: Cars, boats
Number of Channels: 8
Wireless Frequency: 2.4GHz ISM
Transmitting Power: < 20 dBm
Wireless Standard: AFHDS 3
Low Voltage Alarm: < 3.65V
Data Output: USB Type-C
Charging Interface: USB Type-C
Antenna Type: Built-in single antenna
Display Screen: 3.5-inch 320480 full-dot matrix color IPS touchscreen display
Channel Resolution: 4096
Input Power: 1S (4.35V) * 4300mAh lithium polymer battery+3450mAh 18650 battery
Remote Control Distance: >300m (open and undisturbed ground distance)
Language: CN Version(Only supports Simplified Chinese), EN&EU Version(Only supports English)
Online Update: Supported
Temperature Range: -10℃ to +60℃
Humidity Range: 20% to 95%
Appearance Color: Black
Dimensions: 131.4*190.6mm
Weight: 520g
Safety Certification: CE, SRRC, FCC ID: 2A2UNNB4PLUS00, MIC, RCM


FGr4B Receiver Specifications:
Product Designation: FGr4B
Compatible transmitters: all AFHDS 3 transmitters and RF Modules (PL18, Paladin EV, NB4, NB4 Lite, etc.)
Model Type: Car/boat etc
PWM Channels: 4
RF: 2.4GHz
Protocol: AFHDS 3
Antenna: Dual Antennas
Input Power: 3.5-9V
Data Output: PWM/PPM/i.BUS out/S.BUS
Temperature Range: -10℃ to +60℃
Humidity Limit: 20%-95%
Online Update: Yes
Dimensions: 17*29*16mm
Weight: 6.4g
Certification: CE，FCC ID:N4ZFGR4B000

This is the High Speed Response R404SBS-E F-4G T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba which are included with the new 10PX transmitters.

NOTE:

• SR mode servos must be used when using SR mode. Use of normal servos may cause servo glitching.
• Never use the R404SBS-E in gas or nitro powered models.

Specifications:

• Size: 25.5×20.7×10.6 mm
• Weight: 5.7 g
• Operating Voltage: DC 3.7V-7.4V

This is the High Speed Response R404SBS F-4G T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba which are included with the new 10PX transmitters.


Specifications:

• Size: 25.5×20.7×10.6 mm
• Weight: 5.7 g
• Operating Voltage: DC 3.7V-7.4V

This is the High Speed Response R334SBS-E T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba.

Designed for use with Futaba surface transmitters using TFHSS and
TFHSS-SR technology
TFHSS bidirectional telemetry
Programmable and compatible with S.Bus2 systems
Normal/high-speed modes (auto detection), normal mode accepts any
type of servo, high-speed mode only accepts digital servos
including BLS servos
High voltage
Dual antenna diversity
Battery fail safe
One year limited warranty through Hobby Services beginning at date of
purchase

NOTE:

• Never use the R344SBS-E in gas or nitro powered models.

Specifications:

• Size: 33.9×22.3×11.3 mm
• Weight: 7.3 g
• Operating Voltage: DC 3.7V-7.4V

This is the R314SB-E T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba compatible: 7PX / 7XC / 4PM / 4PX / 4PV / 4PLS / 4GRS / 3PV

T-FHSS Telemetry System 4-Channel Receiver T-FHSS/S.Bus2


NOTE:

• The R314SB-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.

Features:

• Compatible: 7PX / 7XC / 4PM / 4PX / 4PV / 4PLS / 4GRS / 3PV
• T-FHSS Telemetry System 4-Channel Receiver
• T-FHSS/S.Bus2

Specifications:

• Frequency: 2.4GHZ T-FHSS
• Nominal Input Voltage: 4.8-7.4V
• Dimensions: 35.1 x 23.2 x 12.5mm
• Weight: 7g
• Range: Only for Electric Powered Car Models

This is the R314SB T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba for 4PLS 4PX 4PXR 3PV Radios.


Features:

• For: 4PLS 4PX 4PXR
• Modulation Method: 2.4GHz
• Color: Black

Specifications:

• Dimensions: 35.1 x 23.2 x 8.5mm
  Weight: 6.6g
  Rated Voltage: 4.8V-7.4V
  Operating Voltage: 4.0V-8.4V

This is the R204GF-E 4-Channel 2.4GHz S-FHSS Micro Receiver from Futaba which is ideally sized for electric powered 1/10 and 1/12 scale vehicles including rock crawlers. It features a built-in internal antenna system and compatible for use with Futaba S-FHSS or FHSS transmitters. 


Specifications:

• Operating Voltage: 4.8 - 7.4V
• Receiving Range: 70m
• Battery Failsafe: 3.8V
• Current Drain: 30Ma (at no signal)
• Size: 35.1 x 23.2 x 9mm
• Weight: 6g

This is the R203GF 3-Channel 2.4GHz S-FHSS Receiver from Futaba which is compatible with Futaba FHSS and S-FHSS transmitters. Futaba S-FHSS 2.4GHz receivers benefit from Futaba's patented Pre-Vision™ circuitry, which scans incoming data and corrects errors before they can become problems.

They sync perfectly with Continuous Channel Shifting, handling hundreds of frequency changes per second with flawless precision. Plus, they all offer the Easy-Link™ advantage — the feature that allows the receiver to “learn” the transmitter module’s unique code with the push of a button and establish a unique, unbreakable bond between the two.

Frequency Hopping Spread Spectrum (FHSS) technology minimizes interference from other 2.4GHz systems. Easy Link prevents unwanted signal conflicts by using a special, pre-assigned ID code. High-voltage  operation.

NOTE: This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.

Features:

• S-FHSS/FHSS auto detection
• Compatible with Futaba S-FHSS/FHSS protocol
• Normal and high-speed mode:
• Normal mode has a frame rate output of 13.63ms and accepts any type of servos or peripherals
• High-speed mode, with an output of 6.8ms, accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs

Specifications:
Dimensions: 26x39x10mm
Weight: 8g
Operating Voltage: 4.8 to 7.4V |
Number of Ports: 4
PWM Output: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Speed: Yes
High Voltage: Yes
Connector: J (STND)
Range: Full Range

NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.

This is the FGr4D 4-Channel 2.4GHz Receiver from Flysky with dual built-in antennas.

Specifications:
Product Designation: FGr4D
Compatible transmitters: all AFHDS 3 transmitters and RF Modules (PL18, Paladin EV, NB4, NB4 Lite, etc.)
Model Type: Car/boat etc
PWM Channels: 4
RF: 2.4GHz
Protocol: AFHDS 3
Antenna: Dual built-in antennas
Input Power: 3.5-9V/DC
Data Output: PWM/PPM/i.BUS 2/S.BUS/i.BUS
Temperature Range: -10℃ to +60℃
Humidity Range: 20%-95%
Online Update: Yes
Dimensions: 30.3*25.8*20mm
Weight: 7.2g
Certification: CE，FCC ID:2A2UNFGR4D

This is the FGr4B 4-Channel 2.4GHz Receiver from Flysky.

Specifications:
Product Designation: FGr4B
Compatible transmitters: all AFHDS 3 transmitters and RF Modules (PL18, Paladin EV, NB4, NB4 Lite, etc.)
Model Type: Car/boat etc
PWM Channels: 4
RF: 2.4GHz
Protocol: AFHDS 3
Antenna: Dual Antennas
Input Power: 3.5-9V
Data Output: PWM/PPM/i.BUS out/S.BUS
Temperature Range: -10℃ to +60℃
Humidity Limit: 20%-95%
Online Update: Yes
Dimensions: 17*29*16mm
Weight: 6.4g
Certification: CE，FCC ID:N4ZFGR4B000

This is the R202GF 2-Channel 2.4GHz S-FHSS Receiver from Futaba which is compatible with Futaba FHSS and S-FHSS transmitters.

Specifications:
Dimensions: 35x23x9mm
Weight: 6g
Operating Voltage: 4.8 to 7.4V
Number of Ports: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Voltage: Yes

NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.