1/10 Off-Road 4WD Front Tires

This is a packet of (2) 1/10 Hole Shot 3.0 2.2" 4WD Front Buggy Tires from Pro-Line.

This is a pair of (2) 1/10 HOLE SHOT 2.0 Buggy Tires in M4 (Super-Soft) compound from Proline.

The Hole Shot is the tire that everyone turns to when looking for an edge over the competition because it just works, everywhere. Period.

The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable.

Pro-Line's development staff is now proud to announce the Hole Shot 2.0 The 2.0 version features more pins and a wider contact patch for insane amounts of traction.

The unique mini-pin design gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 is a must have tire in everyone’s racing arsenal, so get some today!


Features:

• Updated pin design lasts longer
• Small, square-lug technology throughout tire
• Outer pins are angled to resist catching ruts
• Internal webbing reduces tire expansion under acceleration
• Fits any 1:10 2.2” Buggy front wheel
• Tire made 100% in the USA
• Foam Inserts included

Package Includes:

• 2x HOLE SHOT 2.0 1/10 4wd Front Buggy Race Tires
• 2x Foam Inserts

This is a pair of (2) 1/10 BLOCKADE Buggy Tires in M3 (Soft) compound from Proline.

The Pro-Line Blockade 2.2" 4WD Buggy Front Tire is perfect for loose, dusty or hard-packed conditions.

The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires.

This tire will give your buggy qualifying speed with tread life capable of outlasting the competition.


Features:

• Revolutionary Tread Design
• Longer Tread Life
• More Traction
• Based off the 1:8 Buggy 2011 ROAR Fuel Off-Road National Champion
• Dominate Tracks around the Globe
• Ideal for loose, dusty or hard packed conditions
• More Forward Bite
• Outlast the Competition
• Includes Closed Cell Foam
• Made in the USA, since 1982

Package Includes:

• 2x BLOCKADE 1/10 4wd Front Buggy Race Tires
• 2x Closed Cell Foam Inserts

This is a packet of (2) 1/10 Hole Shot 3.0 2.2" 4WD Front Buggy Tires from Pro-Line.

This is a packet of (2) 1/10 SPRINTER 4WD Front Buggy Tires from JConcepts.

The Sprinter tire is designed to have the ability to match front and rear pin tires from JConcepts. The Sprinter 4wd front tire has square, angled pins that are stacked vertically to flex and fold evenly across the tire. Typically, a stacked tread will wear less and provide more bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Starting with the new tread, the team focused on durability and performance to bring a front tire option to market that competes on loose surfaces which are wet or dusty.

With the popularity of dirt-oval racing, vehicles being designed with either mid-motor or laydown transmission options, a new generation pin style, carcass and outer tread design was needed. The outer sidewall of the tire has angled pins incorporated into the design to help “get into” the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation.

Horizontal traction bars connect several pins near the center of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite. The Sprinters are built on the conventional and popular 2.2” bead and carcass design making them interchangeable. The tire maintains a comfy ride while each set of tires includes the Dirt-Tech closed cell inserts.

Features:

• JConcepts original tread, available in multiple compounds
• Square, angled pins with horizontal traction bars
• Angled outer sidewall pins for “turn-in”
• Conventional, 2.2” bead mounting size
• Carefully shaped carcass = smooth driving characteristics
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 2.2" DOUBLE DEE's V2 4WD Front Buggy Tires from JConcepts.

The JConcepts Double Dee’s V2 4WD Front tire is perfect for a variety of track surfaces. The especially unique Double Dee lug technology combined with the sticky green compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time. Double Dee’s are good to the last drop as the design allows even wear all the way down to the tire body. The Double Dee’s incorporate a compact tire body with crisp tread and separation for intense racing. Double Dee’s excel on outdoor hard packed clay surfaces with either dry or wet conditions. Double Dee’s are at their best when used on a surface with a blue grooved surface.

Features:

• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" DOUBLE DEE's V2 2WD Front Buggy Tires from JConcepts.

The JConcepts Double Dee’s V2 2WD Front tire is perfect for a variety of track surfaces. The especially unique Double Dee lug technology combined with the sticky green compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time. Double Dee’s are good to the last drop as the design allows even wear all the way down to the tire body. The Double Dee’s incorporate a compact tire body with crisp tread and separation for intense racing. Double Dee’s excel on outdoor hard packed clay surfaces with either dry or wet conditions. Double Dee’s are at their best when used on a surface with a blue grooved surface.

Features:

• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" GOOSE BUMP's 4WD Front Buggy Tires from JConcepts.

The JConcepts Goose Bumps tire is just what the doctor ordered. The totally unique step pin and bar lug design combined with sticky compounds like yellow, blue and green allow even greater control on slightly loamy and wet conditions. The Goose Bumps are a special breed, designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Once the driver wears through the initial pin, a bar follows to maximize potential on aggressive surfaces.

The Goose Bumps incorporate a compact tire body with a crisp tread pattern with precise separation for intense racing competition. Goose Bumps in new condition excel on soft surfaces with either dry or wet conditions. Worn Goose Bumps excel on indoor or outdoor clay tracks where a slight groove has formed.

Features:

• Compact tire body with crisp tread and precise separation
• Aggressive step pin and bar lug combination design
• Includes firm And-1 inserts

This is a packet of (2) 1/10 DIRT WEBS 4WD Front Buggy Tires from JConcepts.

The tread, originally based on the popular Pressure Points tire design connects uniformly positioned Web-Bars to create an amazingly stable tire.     The Dirt Webs, the ultimate Bar-Tire, relies heavily on the Web-treatment for massive forward acceleration; however, the design does not stop there.   Inside the supported bar portion rests horizontal and vertical alternating bars which help balance side-bite and backs up the Web-Bars to help minimize wear.    Down in the corners, small Pressure Point sized pins break-in quickly providing surface area for specialty indoor racing and also lend a helping hand to stabilize the tire in extreme high-grip conditions.    

 

The outer edges feature a single rib on each side which proves extra side-bite during heavy cornering and side-loading characteristics.    The Dirt Web thread sits on the proven “Bar Code” tire carcass giving the tire a low-profile, wide-body appearance allowing clipped tread to extend all the way to the outer edges.  The carefully shaped profile allows a great balance of monster forward traction and comfortable side-bite.    Available in multiple compounds, the Dirt Webs can easily be matched to any track conditions ranging from indoor clay, indoor dirt to outdoor hard-packed or treated clay or dirt.

 

Features:

• JConcepts original tread, available in multiple compounds

• Designed in conjunction with Brian Kinwald and Jason Ruona

• Connected Web-bars for stability / forward grip

• Horizontal and vertical bars for side-bite

• Pressure Point pins adds surface area

• 2.2” bead mounting size for compatibility

• Carefully shaped carcass = forward traction

• Includes firm And-1 foam inserts

This is a packet of (2) 1/10 ELLIPSE's 4WD Front Buggy Tires from JConcepts.

The Ellipse, named after the center bar built into the tread, is a compliment to successful tires such as the Dirt Webs and Space Bars. The “Web” style tire was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The center section of the tire is a home run utilizing a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability.

The Dirt Web tire was originally released during the 2013 racing season and debuted in spectacular fashion with a win at the CRCRC Midwest Championships. Since that time, the Dirt Webs have been an industry leader for indoor performance and often chosen as a control tire for performance, reliability and consistency. During 2016, the Space Bars were introduced to a victory at the 1/10th Off-Road Nationals in the hands of Ryan Maifield in the 4wd modified class.

Jason Ruona explains, “The Ellipse has a slightly tighter carcass, it allows the driver to attack high-speed sections with more comfort. The “home plate” and connected web of tread has more stability high-speed and holds the tire together for today’s high-powered vehicles. Connected tread wears significantly better which is useful racing indoors where a racer can break-in and race with the same pair all weekend.”

The Ellipse tires are available in a huge selection of compounds such as blue, green, aqua, gold and the ROAR National Champion, silver compound. As a rule of thumb, blue and green are compounds conditioned to perform outdoors while aqua, gold and silver remain the favorites indoors. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Features:

• Designed in conjunction with World Champions Ryan Maifield, Spencer Rivkin and Ryan Cavalieri
• Ellipse center-bar control and support
• Diamond “home plate” design with extension webs
• 2.2” bead mounting size for compatibility
• Available in multiple compounds
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 SuperSoft Front 4wd IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 4wd IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 4wd VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The staggered center bars on the 4WD front provide extra forward bite regardless of the direction of the lugs. The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Front 4wd VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The staggered center bars on the 4WD front provide extra forward bite regardless of the direction of the lugs. The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) Front spike tires from Tamiya for vehicles like their Supershot and VQS but will fit other 1/10 vehicle.


Keep your car in good running order by replacing worn out tires, or used to help restore that old car that you have lying around.

This is a packet of (2) 1/10 SuperSoft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.

The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.

NOTE: These tires are only compatible with AKA EVO 4WD front wheels.

Features:

• EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond. 
• EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
• Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
• Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.

This is a packet of (2) 1/10 Soft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.

The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.

NOTE: These tires are only compatible with AKA EVO 4WD front wheels.

Features:

• EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond. 
• EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
• Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
• Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.