Tools
The Pro-Line Hauler Bag is here! Designed with 4 easy access drawer compartments, several zipper pockets and tool storage, the Pro-Line Hauler Bag is perfect for your RC needs.
Stylish Pro-Line logos on the front, top and side stand out when arriving at the track and a collapsible pull handle and smooth rolling casters combine to get you organized in the pits.
The new Hauler Bag also includes tie-down Bungee straps for securing 1 vehicle (Buggy, SC, Truck, etc.) on top of the Bag for fewer trips between the Track and your vehicle. Get your own Pro-Line Hauler Bag today!
- High grade nylon construction
- Exterior Dimension: 21"(53.4cm) W x 20"(50.8cm)H x 13.5"(34.3cm) D
- 4 easy access drawers:
1 Large - 20"W x 8"H x 12.5"D
1 Medium - 20"W x 5"H x 12.5"D
2 Small - 10"W x 5"H x 12.5"D - Zipper and Velcro® compartments
- Tool organizer
- Retractable handle combine with smooth casters for easy transportation
Dimensions: 376 x 262 x 216mm
This is the 1/8 Buggy Tire Bag from ProTek RC.
The ProTek RC 1/8 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 8" tall, 4.75" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 17" wide, 12"deep, and 9" tall.
The lid of the bag features a large ProTek RC logo in white, and has a 16x11" mesh zipper pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory.
Features:
- Perfect for 1/8 Buggy, 1/10 Short Course, No Prep/Outlaw Drag Racing, and Crawler tires smaller than 12cm
- Six airtight 20.5cm tall, 12cm diameter PET tubes with screw on lid
- Heavy duty nylon material
- Bag measures 43.5cm wide, 30.5cm deep and 23cm tall
- Internal 40.5 x 28cm mesh zippered pocket
Features:
- Convenient compact size design
- KOS32306 foam is included
- Detachable shoulder strap included
- Very thick protective cover
- Please notice the bag is flexible. Dimensions below is for your reference. The actual size can be slightly different.
Size: W × D × H – 300× 240× 160 mm (outside)
Note: Cars, parts, accessories & others are not included.
Limited edition color commemorating the 60th anniversary of Kyosho.
Packet includes:
- 1x soft case with the Mini-Z logo
- 3x Box drivers: 3.5mm, 4.0mm, 4.5mm
- 3x Phillips screwdrivers: #00, #0, #1
- 1x Hex driver: 1.5mm
Also included is a removable grip which can be connected to each screwdriver. The stand and the transparent cover offer convenient and handy use.
This is a Finish Line Shock Oil Bag from Jconcepts.
An organized racing bag, pit area or workstation is highly under-rated. The JConcepts team believes in organization and that extends to tuning bits and items like oil. It is common for racers to have multiple weight shock oils and with the increased use of fluid filled diffs and large volume shocks, racers accumulate a lot of oil bottles. Thankfully JConcepts has added the shock oil bag to the line-up featuring a semi-rigid liner, woven technical appearing fabric and high-density foam insert built to handle up to 25 bottles.
The lid features a pocket on the inside for notes, instructions sheets or setup guides and has a handy Velcro closure. The Finish Line oil bag has a lot of functionality thanks to racers like Paul Wynn, Spencer Rivkin and Ryan Maifield always experimenting and asking for more. The bag is constructed with heavy-duty zipper closures and a top handle for easy handling and carrying ability. The item is topped off with embroidered JConcepts Finish Line logo for brand loyalty and authenticity. Get organized, stay in style with JConcepts.
Features:
- Compact size, great for storage
- Composite, semi-rigid liner
- High density foam with staggered hole placement
- Inner pocket for additional storage
- Luxurious Woven fabric for high-end looks
- Rugged handle, and strap
- Embroidered JConcepts logo
- Heavy-duty stitching throughout
From the mind of Gil Losi Jr. comes an ingenious way for 1/5, 1/8 and 1/10 racers to virtually eliminate chassis "tweak" by precisely matching the length and dampening rate of their shocks.
To set length, racers attach the shocks to the matching tool and use the easy to read gauge to adjust length. To check lengths are equal all they have to do is make sure the gauge at the bottom of the tool is centered.
The matching gauge swinging in the direction of the "weaker" shock during compression will indicate any difference in dampening rate.
The Shock Matching Tool is machined from anodized aluminum with a laser-etched measuring scale on the face. The pivoting gauge on the bottom of the tool is ball bearing supported for maximum precision.
Key Features:
- Hard-anodized aluminum
- Ball bearing pivot gauge for maximum precision
- Laser-etched measuring scale
- For all racers: 1/5- to 1/10-scale
This is a genuine MINI-Z Bag from Kyosho, which is a great addition to your storage needs.
This small bag is ideal for transporting or storing your Mini-Z Ready set, tools and spare parts.
The incorporated padded dividers, pockets and rubber bands all help to keep tools and components securely in place.
The outside of the bag is embroidered with the “Kyosho Mini-Z” logo to rep the brand in quality fashion.
Dimensions: 280x200x75mm
The ProTek R/C 1/8 Buggy Carrying Bag is a clean and convenient way to transport your buggy.
Designed for racers looking for a convenient solution to transport a nitro or electric buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/8 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/8 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/8 buggy w/body and w/tires
Dimensions (W x L x H): 34 x 45.5 x 14.5cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Buggy in pictures is for display purposes only and is not included.
The ProTek R/C 1/10 Buggy Carrying Bag is a clean and convenient way to transport your buggy.
Designed for racers looking for a convenient solution to transport an electric 1/10 buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/10 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your workshop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/10 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/10 buggy w/body and w/tires
Dimensions (W x L x H): 28 x 41 x 11cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Buggy in pictures is for display purposes only and is not included.
The ProTek R/C 1/8 Truggy Carrying Bag is a clean and convenient way to transport your truggy.
Designed for racers looking for a convenient solution to transport a nitro or electric Truck, this bag is a great way to keep your Truck from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/8 Truggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the Truggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/8 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/8 truggy w/body and w/tires
Dimensions (W x L x H): 44.5 x 53.5 x 12cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Truggy in pictures is for display purposes only and is not included.
The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use.
Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!
The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.
The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.
Features:
- Durable, heavy-duty bag material
- Dual handles won't interfere with tires
- Safe, one handed pit operation
- Straps optimized for truggy use
- No fumes in your face
- Compatible with boxes up to 14cm wide x 36.8cm long
- Made in the USA
Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8
NOTE: Truggy in pictures is for display purposes only and is not included.
This is a Crosshair Magnetic Body Mounting Kit from Protoform.
Have you ever painted up a killer race body, only to botch the mounting job by aligning it off-center, crooked, or too far forward or back on your chassis? Everyone has done this at least once. That's why the guys at PROTOform developed the PROTOform Crosshair Body Mounting Kit!
The PROTOform Crosshair Body Mounting Kit uses high-powered magnets to pinpoint the exact position of your car’s body posts. This simple but effective system is designed to make it easier to get your race body mounted up just the way you want it.
Here’s how it works:
- Place a Crosshair Body Post Cap on each of your chassis’ 4 body posts, securing them in place with a body clip. (Not included)
- Place your painted body on top of the posts, centering it from left to right as well as determining the fore/aft position, which can affect handling characteristics. (Standard position would be to center the front wheel opening trim line to the front axle of your chassis)
- Hold a Marking Magnet on the outside of your body close to where the body posts are. The magnet will attach itself to the precise position.
- Mark your body post position through the hole on the Marking Magnet with a fine-tip marker.
- Drill your body post holes on the marked locations with a body reamer or power drill.
Voila! All the hassle and guesswork of mounting your race body is taken out of the equation. Now you can hit the track in style.
Features:
- Designed specifically for mounting painted r/c car bodies
- Pinpoint accuracy from high-powered magnets
- Made from high-quality red-anodized aluminum with convenient storage box
- Fits most on-road chassis body posts
Includes:
- 4x Crosshair Body Post Caps
- 4x Marking Magnets
- 1x Storage Box
The Avid Digital Mini Scale is a commonly used tool now in everyone's pit arsenal, typically for filling diffs. With our 500g max weight scale you can now also measure all sorts of things such as your batteries, motors, and your friends' ego.
Specifications:
- Flip cover to keep your scale protected.
- 500g max weight with a 0.01g accuracy.
- LCD display with back-light for easy reading.
- Multiple weighing units: (g / gn / oz / ozt / ct / t / dwt).
- Supports tare weighing.
- Over-load and low-power indication.
- Auto power-offs.
- Size: 128 x 76 x 20mm.
- Includes: (1) scale and (2) AAA batteries.
This is the Fuel Gun and Bottle Holster from ProTek RC.
This innovative and handy accessory allows you to securely carry your fuel gun and bottle, making it easy to access during races and practice sessions. No more fumbling around searching for your fuel bottle or gun, give yourself the holster the pro's use and dominate pit lane!
Note: This holster fits most fuel bottles and guns but may not be compatible with every option available. We recommend the ProTek RC "Fast Fill 2" fuel bottle (PTK-7606) and the ProTek RC "Quick Pit 2" Dump Fuel Gun (PTK-7608) for proper fitment.
Features:
- Securely holds fuel gun and bottle
- Convenient for quick access during races
- Durable construction for long-lasting use
- Secure belt loop and thigh strap mounting
- Pair with the ProTek RC Pro Pit Pack (PTK-8125) for the ultimate pit stop experience!
- Holds both a fuel bottle Fuel Gun
This is the Pro Pit Pack from ProTek RC.
Designed for racers and mechanics alike, this versatile pack ensures that your essential tools and accessories are organized and easily accessible during pit stops. Whether you're at the track or in the workshop, the Pro Pit Pack keeps everything you need within reach, allowing for quick and efficient adjustments.
Constructed from heavy-duty fabric, this pack is built to withstand the rigors of the racing environment. Its compact design makes it easy to carry, while a zippered compartment and elastic straps securely hold your tools, ensuring nothing is left behind. The zippered pouch is perfect for storing small parts like glow plugs, and the additional elastic straps behind the zippered pouch are ideal for items like tuning screwdrivers or glow igniters. With belt clips included, this is a must have for any racer!
Features:
- Compact design for easy portability
- Durable construction to withstand tough conditions
- Multiple compartments for organized storage
- Elastic straps to securely hold tools in place
- Zippered pouch for small part storage
Features:
- A precise droop gauge to check the droop in range 60~140mm
- Quickly and accurately measure the droop by mounting the gauge to your upper shock nut
- Precise scale engraved on both sides for quick check
- CNC-machined from lightweight aluminum material
- Excellent for 1/8 & 1/10 off-road & GT cars
Note: Cars, parts, accessories & others are not included.
Features:
- Hard case for tools & accessories
- Excellent for Koswork H165mm Vacuum Pump
- Lid includes net pocket with zipper
- Better protection for your equipment
- Great for mobile phone power bank, adapter & cable storage
- Please notice the bag is flexible. Dimensions below is for your reference.
- The actual size can be slightly different.
Size:
- W × D × H – 180 × 90 × 85 mm (inside)
Note: Cars, parts, accessories & others are not included.
Features:
- Hard case for tools & accessories
- Excellent for Koswork H130mm Vacuum Pump
- Lid includes net pocket with zipper
- Better protection for your equipment
- Great for mobile phone power bank, adapter & cable storage
- Please notice the bag is flexible. Dimensions below is for your reference.
- The actual size can be slightly different.
Size:
- W × D × H – 140 × 90 × 85 mm (inside)
Note: Cars, parts, accessories & others are not included.
Being organized is the name of the game. The best organized, best prepared racers are typically the ones reaching for that top step of the podium. JConcepts has reached into their bag of tricks to help racer organization. The motor | rotor box includes plenty of space for assembled motors, individually spaced rotors and a pocket for miscellaneous motor tuning items.
The motor/rotor box has a small footprint which makes it ideal for short trips with minimal amounts of space. Inside the box is roomy enough for three assembled motors and cushioned with high-impact foam that allow the items to lay in a bed like a cradle during rest periods. At the other end, five areas can house rotors and the pocket at the end gives all-important extra storage. The foam insert material has a grabby feel and allows the user to manipulate to grab needed items. The custom built storage box, molded black in color has JConcepts.net logo for authenticity and built-in plastic latch for easy open and close operation.
Note – rotors are extremely magnetic and setting them in the cradle can be tricky. Enter and remove with ease and patience and maintain separation until they are resting in their individual cradles.
Features:
- Innovative design, durable material
- Fits, three assembled motors, five rotors
- Miscellaneous storage pocket
- High-impact and steady foam cradle
- Finger tip and grip access
- Handy, built-in latch
Blast away debris from your bearings and extend bearing life with the RPM Bearing Blaster! This simple, two piece tool, works with your favorite cleaning agent, such as Motor Spray, WD-40, electrical contact cleaner, etc. (any cleaner that is pressurized and has a directional spray tube).
The RPM Bearing Blaster has an open, flow through design that eliminates back-pressure problems which also permits more efficient elimination of dirt and grit from the bearings being cleaned.
This tool uses hand pressure to hold the bearing in place during cleaning which means easier access to the bearings and makes cleaning bearings much quicker. By using hand pressure, you will know for sure the cleaning agent is passing through the bearing and not around it.
The Bearing Blaster works with all bearings* with a minimum I.D. of 3mm. and a maximum O.D. 19mm. Standing at a mere 29mm tall and 45mm in diameter, it will be the smallest, most effective tool in your tool box!
No other bearing cleaning method currently available compares to the effectiveness of the RPM Bearing Blaster!
This is a handy multiuse case with a MINI-Z logo from Kyosho.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Technical Specifications:
- Dimensions: approx. 201 x 108 x 52mm
- Maximum MINI-Z size: approx. 187 x 95 x 48mm
Features:
- Designed to install under the battery
- For shorty lipo
- Low CG
Note: Cars, parts, accessories & others are not included.
Features:
- Designed to install under the battery
- For shorty lipo
- Low CG
Note: Cars, parts, accessories & others are not included.
This pack of 5 small hinged branded plastic doodad containers are great for those small items in your tool box that just need a tad bit more of that OCD attention to detail. We have been using this container for years now for our engine bearing line etc. They come in so handy when you just need a small container for that slipper rebuild, piston change, or engine bearing swap yet you don't want the part to mingle with the other parts in your screw container.
Specifications:
- Outside: Diameter = 30.0mm X Height = 11.2mm
- Inside: Diameter = 26.9mm X Height = 9.4mm
Features:
- Designed to install under the battery
- For shorty lipo
- Low CG
Note: Cars, parts, accessories & others are not included.
NOTE: This is a gold version not the black one shown in the photo.
Specifications:
- Durable plastic with a single latch and 1 compartment bin.
- Branded with Avid's new logo in the bottom right corner.
- Dimensions: 144x84x34mm
Specifications:
- Durable plastic with a single latch and 8 compartment bins
- Branded with Avid's new logo in the bottom right corner
- Dimensions: 137x68x28mm
It definitely helps to tidy up the screws/parts storage.
It includes 2 movable plastic plates for multiple partition therefore you can store the screws/parts in a more convenient way.
It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts.
Specifications:
- Material: Plastic
- Color: Black
- Length: Approx. 86mm
- Width: Approx. 55mm
- Height: Approx. 20mm
Features:
- Excellent for touring car and small cars
- Prevents flat spots on tires
- W × D × H – 150 × 90× 30 mm
Note: Cars, parts, accessories & others are not included.
Features:
- Excellent for touring car and small cars
- Prevents flat spots on tires
- Removable characters
- W × D × H – 150 × 90× 30 mm
Note: Cars, parts, accessories & others are not included.
Features:
- Good for various sizes of bottles
- Designed for KOS32204 Shock/Diff Fluid Bag
- Can be used inside bag drawers
- W × D × H – 202 x 104 x 25mm
- 1