Avid RC 48 Pitch Pinions
AVID Racing Concepts 48 Pitch Pinion Gear (41T) (AVD AV1400-41)
The Avid 41 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 41 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (40T) (AVD AV1400-40)
The Avid 40 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 40 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (39T) (AVD AV1400-39)
The Avid 39 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 39 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (38T) (AVD AV1400-38)
The Avid 38 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 38 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (37T) (AVD AV1400-37)
The Avid 37 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 37 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (36T) (AVD AV1400-36)
The Avid 36 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 36 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (35T) (AVD AV1400-35)
The Avid 35 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 35 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (34T) (AVD AV1400-34)
The Avid 34 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 34 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (33T) (AVD AV1400-33)
The Avid 33 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 33 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (32T) (AVD AV1400-32)
The Avid 32 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 32 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (31T) (AVD AV1400-31)
The Avid 31 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 31 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (30T) (AVD AV1400-30)
The Avid 30 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 30 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (29T) (AVD AV1400-29)
The Avid 29 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 29 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (28T) (AVD AV1400-28)
The Avid 28 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 28 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (27T) (AVD AV1400-27)
The Avid 27 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 27 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (26T) (AVD AV1400-26)
The Avid 26 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 26 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (25T) (AVD AV1400-25)
The Avid 25 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 25 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (24T) (AVD AV1400-24)
The Avid 24 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 24 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (23T) (AVD AV1400-23)
The Avid 23 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 23 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (22T) (AVD AV1400-22)
The Avid 22 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 22 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (21T) (AVD AV1400-21)
The Avid 21 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 21 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (20T) (AVD AV1400-20)
The Avid 20 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 20 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (19T) (AVD AV1400-19)
The Avid 19 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 19 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (18T) (AVD AV1400-18)
The Avid 18 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 18 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
Out of Stock
$12.95 Inc Tax
AVID Racing Concepts 48 Pitch Pinion Gear (17T) (AVD AV1400-17)
The Avid 17 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 17 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (16T) (AVD AV1400-16)
The Avid 16 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 16 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (15T) (AVD AV1400-15)
The Avid 15 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 15 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (14T) (AVD AV1400-14)
The Avid 14 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 14 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
AVID Racing Concepts 48 Pitch Pinion Gear (13T) (AVD AV1400-13)
The Avid 13 tooth 48 pitch pinion is made out of 7075-T6 aluminum and hard-anodized to reduce wear and friction.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
AVID RC have laser etched all the details onto the pinion for easy notification.
It is the common 1/8" bore (3.17mm) and includes one set screw.
Details
- 48 Pitch | 13 Tooth
- 7075-T6 Hard-Anodized Aluminum
- Full range available | 13 - 41 tooth
- Laser etched for your convenience
Used in 1/10 on-road and off-road vehicles.
- 1