Special Offers
These tires are only compatible with AKA EVO 2WD front wheels.
These tires are only compatible with AKA EVO 4WD front wheels.
These tires are only compatible with AKA EVO 4WD front wheels.
Clear so you can paint them to suit your Paint scheme
Out of Stock
$10.00 Inc Tax
$13.95
These wheels are designed for the AKA "EVO" tires.
Out of Stock
$5.00 Inc Tax
$9.75
Xtreme Racing Carbon Fiber Center Diff Top Plate: Kyosho MP9 (XTM 10727)
This is a optional Carbon Fiber Center Differential Top Plate from Xtreme Racing and is intended for use with the Kyosho MP9.
Add a little bling to your MP9
Team Losi Racing Rear Outer Hinge Pin Brace (3T/3A): 8ight & 8ight-T 2.0 (LOSA1749)
This is a 3T/3A Rear Outer Hinge Pin Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
AKA Racing 1/10 "EVO" TYPO 2.4" Front 2WD Buggy Tires (2) (Soft) (Red Inserts) (AKA 13220SR)
This is a packet of (2) 1/10 Soft "EVO" TYPO Front 2WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 2WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 2WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 2WD front wheels.
AKA Racing 1/10 "EVO" TYPO 2.4" Front 4WD Buggy Tires (2) (SuperSoft) (Red Inserts) (AKA 13320VR)
This is a packet of (2) 1/10 SuperSoft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 4WD front wheels.
AKA Racing 1/10 "EVO" TYPO 2.4" Front 4WD Buggy Tires (2) (Soft) (Red Inserts) (AKA 13320SR)
This is a packet of (2) 1/10 Soft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 4WD front wheels.
Team Losi Racing Rear HRC Anti-Squat Tuning Set: 22-4 (TLR234019)
This is a HRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
22-4 Anti-Squat Tuning Set
Team Losi Racing Gear Differential Seal Set: 22-4 (TLR232048)
This is a Gear Differential Seal Set from Team Losi Racing for their 22-4 2.0 buggies. Includes enough to rebuild 2 differentials.
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Time for diff maintenance?
Team Losi Racing Rear LRC Anti-Squat Tuning Set: 22-4 (TLR234018)
This is a LRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
22-4 LRC Anti-Squat Tuning Set
Team Losi Racing Servo Mount & Steering Horn Set: 22-4 & 22-4 2.0 (TLR234024)
This is a Servo Mount & Steering Horn Set from Team Losi Racing for their 22-4 & 22-4 2.0 4WD racing buggies.
Package includes:
- 1x 23T servo horns
- 1x 24T servo horns
- 1x 25T servo horns
- 1x A steering horns
- 1x B steering horns
- 1x 93mm turnbuckle
- 2x rod ends
22-4 Servo Mount & Steering Horn
Team Losi Racing Front & Rear Hub Set: 22-4 (TLR234015)
This is a Front & Rear Hub Set from Team Losi Racing for their 22-4 4WD racing buggies.
22-4 Front & Rear Hub Set
Team Losi Racing One-Way/Clicker Set: 22-4 (TLR232023)
This is a One-Way/Clicker Set from Team Losi Racing for their 22-4 4WD racing buggies.
Package includes:
- parts required to build the unit as a one way
- parts required to build the unit as full time 4wd assembly
- parts required to build the unit as a "clicker" assembly
22-4 One-Way/Clicker Set
Team Losi Racing Slipper Plate Set: 22-4 (TLR232021)
This is a Slipper Plate Set from Team Losi Racing for their 22-4 4WD racing buggies.
Package includes:
- 1x inner slipper plate
- 1x outer slipper plate
22-4 Slipper Plate Set
Team Losi Racing 12mm Shock End & Spring Cup Set: 22/T/SCT/22-4 (TLR5095)
This is a 12mm Shock End & Spring Cup Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.
Package includes:
Package includes:
- 4x Shock ends
- 4x spring cups
- 4x mounting balls
Fits most of the TLR 22 Buggies and Trucks
Team Losi Racing 3.5x48mm TiCN Front Shock Shaft (2): 22 SCT (TLR233001)
This is a packet of (2) 3.5x48mm TiCN Front Shock Shaft from Team Losi Racing for the 22 SCT racing Short Course Truck.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
22 SCT Front Shock Shaft
Team Losi Racing 3.5x44mm TiCN Front Shock Shafts (2): 22 & 22-4 2.0 (TLR233000)
This is a packet of (2) 3.5x44mm TiCN Front Shock Shaft from Team Losi Racing for the 22 and 22-4 2.0 racing buggies.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Common TLR Front Shock Shaft
Out of Stock
$10.00 Inc Tax
$14.50
Team Losi Racing 3.5x57.5mm TiCN Rear Shock Shafts (2): 22SCT (TLR233004)
This is a packet of (2) 3.5x52mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 SCT racing Trucks
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of SCT Trucks
Team Losi Racing 3.5x50mm TiCN Shock Shafts (2): 22, 22T & 22SCT (TLR233002)
This is a packet of (2) 3.5x50mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 racing buggies. These are also used as front shock shafts on the TLR 22T and 22SCT Racing Trucks
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of 2wd Buggies & Front of Trucks
Out of Stock
$10.00 Inc Tax
$14.50
Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) (TLR233008)
This is a packet of (4) (1.5x2) 12mm CNC Machined Shock Piston from Team Losi Racing.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
Fits most of the 22 series of 1/10 vehicles
Team Losi Clutch Bearing Set (LOSA6949)
This is the replacement clutch bearing set for the Losi 8IGHT buggy.
This set includes:- One 5x10x4mm bearing
- One 5x13x4mm bearing
(5x13x4mm & 5x10x4mm)
VBC Racing Graphite Bumper Top Plate with MyLaps Mount: WildFire (VBC A-01-VBC-0029-1)
This is a Graphite Bumper Top Plate with MyLaps Mount from VBC Racing
Mounts PT as far forward as possible
Yeah Racing Aluminium Motor Heatsink (380) (Blue) (YR YA-0132BU)
Fits a 380 size motor
Out of Stock
$10.00 Inc Tax
$14.95
Agama CNC Engine Mount: A8 / A8T / A215 (AG-7206)
This is a CNC Engine Mount from Agama for their 1/8 A8 & A215 Buggy and 1/8 A8T Truggy Kit Vehicles.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
Also fits the Kyosho MP9
Team Losi Racing Battery Cover Heat Shield: 5IVE B (TLR251009)
This is a Battery Cover Heat Shield from Team Losi Racing for their 5IVE B.
Heavily discounted
Out of Stock
$10.00 Inc Tax
$24.95
Agama Hinge Pins (4mm)(4): A8 / A8T / A215 (AG-8227)
This is a packet of (4) 4mm Hinge Pins from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Rear Uprights: A8/ A8T/A215T (AG-1010)
This is a Rear Uprights from Agama for their A8 Buggy and A8T, A215T Truggies.
Replace old, worn, damaged parts
Agama Cup Joint (Center): A8 / A8T (AG-8228)
This is a Center Cup Joint from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Differential Outdrives (2): A8 / A8T (AG-8219)
This is a packet of (2) Differential Outdrives from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Buggy Front Lower Arms: A8 (AG-1002)
This is a pair of Front lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Buggy Rear Lower Arms: A8 (AG-1003)
This is a pair of Rear lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Rear Gear Box Case: A8 / A8T (AG-1005)
This is a Rear Gear Box Case from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Team Losi Racing 8.8mm Suspension Balls: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA6049)
This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits most TLR 1/8 vehicles
Kyosho Rear Hub Set: V-One RRR (KYO KP VZ202)
This is a Front Torque Rod from Kyosho to fit their On-Road V-One RRR race car.
Fits the Kyosho V-One RRR
Team Losi Racing Nitro Starter Box: Starter Box Plate: 8IGHT-X (TLR346000)
This is a Starter Box Plate for the Team Losi Racing 1/8 nitro Starter Box (TLR99059) to assist it to align up better with the 8IGHT-X buggies.
For Losi Starter Box (TLR99059)
Aluminium 14mm Hex Wheel Adapters (6mm) (Red) (14MMHX6R)
This is a packet of (4) 6mm wide Red Anodised Aluminium 14mm hex wheel adapters.
Package include:
Package include:
- 4x 6mm wide Red 14mm Hex Aluminium wheel adapters
- 4x Wheel pins
- 4x Grub screws
Note: these are 14mm not the common 12mm
Aluminium 14mm Hex Wheel Adapters (6mm) (Silver) (14MMHX6S)
This is a packet of (4) 6mm wide Silver Anodised Aluminium 14mm hex wheel adapters.
Package include:
Package include:
- 4x 6mm wide Red 14mm Hex Aluminium wheel adapters
- 4x Wheel pins
- 4x Grub screws
Note: these are 14mm not the common 12mm
BittyDesign Rear Mud Guards (TLR 2.0) (BTD BDMG-LOS)
This is a packet of (2) clear mudguards from BittyDesign's for TLR 2.0 1/8 scale buggy, but may fit other vehicles.
Bittydesign's Lexan mudguards are designed to help protect the rear driveshafts and shock components from dirt and other contaminants.
Molded from 1mm thick high quality Lexan® polycarbonate, they can be painted to match your paint scheme for that pro bling look!
Bittydesign's Lexan mudguards are designed to help protect the rear driveshafts and shock components from dirt and other contaminants.
Molded from 1mm thick high quality Lexan® polycarbonate, they can be painted to match your paint scheme for that pro bling look!
Clear so you can paint them to suit your Paint scheme
Out of Stock
$10.00 Inc Tax
$13.95
Tamiya Monster Truck Front Wheels (Red) (2) (TAM 50428-1)
This is a pair of (2) Red Front Monster Truck Wheels from Tamiya similar to the rims on the Monster Racer, King Cab and Bush Devil except Red.
Like on the Monster Racer, King Cab and Bush Devil but Red
Team Losi Racing .250 & .500 Wing Spacer Set: 8ight & 8ight-T 2.0 3.0 4.0 (TLR244010)
This is a .250 & .500 Wing Spacer Set from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0, 3.0 & 4.0.
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
- 2x .250 spacers
- 2x .500 spacers
Use to tune the wing position
Agama Front Gear Box Case: A8 / A8T (AG-1004)
This is a Front Gear Box Case from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Team Losi Racing LRC Anti-Squat Tuning Set: 22 2.0, 22T 2.0 & 22SCT 2.0 (TLR234009)
This is a Front/Rear LRC Anti-Squat Tuning Set from Team Losi Racing for their 2nd generation 22 buggy & Truck kits.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
Fits 1st & 2nd generation TLR 22 buggy & Truck kits
Team Losi Racing Wing Stay Set: 22 & 22T (TLR4161)
This is a Wing Stay Set from Team Losi Racing for their 1st and 2nd generation of the 22 buggy and 22T Race trucks.
Fits early TLR 22, 22 2.0, 22T and 22T 2.0 kits
Team Losi Racing HRC Anti-Squat Tuning Set: 22 2.0, 22T 2.0 & 22SCT 2.0 (TLR234010)
This is a Front/Rear HRC Anti-Squat Tuning Set from Team Losi Racing for their 2nd generation 22 buggy & Truck kits.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
Fits 1st & 2nd generation TLR 22 buggy & Truck kits
VBC Racing Shock Springs (2) (Orange) (VBC B-02-VBC-0073-A)
This is a packet of (2) Shock Springs from VBC Racing for their WildFire Touring Cars.
For tuning the WildFire touring car
Team Losi Racing Upper Deck Support & Body Mount Set: Mini-8 -T (LOS211003)
This is a Upper Deck Support & Body Mount Set from Team Losi Racing for their 1/14 Mini-8T Truck Kits.
Packet includes:
Packet includes:
- 1 x chassis upper deck
- 1 x front body mounts
- 1 x rear body mounts
- 1 x front bumper
- 1 x center spur cover
Fits the Mini-8T Truck (not the Mini-8 buggy)
Team Losi Racing 6.8mm Flanged Suspension Ball (4): 8ight & 8ight-T 2.0 (LOSA6055)
This is a packet of (4) 6.8mm Flanged Suspension Ball (4) from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
Kyosho 20 Degree Front Hub Carriers: MP7.5 (KYO KP IFW138)
This is a packet of (2) 20 Degree Front Hub Carriers from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
For early 1/8 Nitro Inferno MP7.5 racer
Kyosho Front Torque Rod: MP7.5 (KYO KP IFW112)
This is a Front Torque Rod from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
For early 1/8 Nitro Inferno MP7.5 racer
VBC Racing Axle Lock Spring (10) (VBC B-02-VBC-0027)
This is a packet of (10) Axle Lock Spring from VBC Racing for their WildFire Touring Cars.
Packet of 10 Axle Lock Spring
VBC Racing TBB Shock Piston (3 holes) (4) (VBC A-03-VBC-0123)
This is a packet of (4) 3 hole TBB Shock Piston from VBC Racing.
Fits VBC TBB Shocks
Agama Rear Shock Shafts (2): A8 / A8T / A215 (AG-8251)
This is a packet of (4) Rear Shock Shafts from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
AVID Racing Concepts Gold Battery Bullets (2) (Low Profile) (5 & 4mm) (AVD AV1092-54LP)
This is a packet of (2) AVID Racing Concepts 5 to 4mm gold plated battery bullets which are excellent for putting on your charger so that you may charge both battery bullet sizes with ease.
They also feature the low profile head design to keep your wire setup nice and clean looking.
Specifications:
Packet includes:
They also feature the low profile head design to keep your wire setup nice and clean looking.
Specifications:
- Gold plated plug from 5mm to 4mm thick.
- Battery stem 16.00mm long, low profile post 3.00mm tall, and total length 19mm.
Packet includes:
- 2 x 5mm to 4mm gold plated battery bullets
Excellent for putting on your charger
Team Losi Racing Front Shock Tower: 22 (TLR1055)
This is a Front Shock Tower from Team Losi Racing for most of their 22 buggy race kits.
Fits most TLR 22 Buggy kits
Agama Shock Seals and Guides Maintenance Pack: A8 / A8T / A215 (AG-4910)
This is a Shock Seals and Guides Maintenance Pack from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Front Shock Shafts (2): A8T / A215T (AG-8250T)
This is a packet of (2) Front Shock Shafts from Agama for their A8T & A215T Truggies.
Replace old, worn, damaged parts
Avid Racing Concepts Spring Tube Pack (8th Off-Road) (4) (AVD AV1203-TUBE)
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
Keep your 1/8 springs safe and tidy
Avid Racing Concepts Spring Tube Pack (10th On-Road) (4) (AVD AV1205-TUBE)
This is a packet of (4) 10th scale touring spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 24.9mm X Ht. 38.1mm
- Inside: Dia. 20.3mm X Ht. 35.3mm
Keep your 1/10 Touring springs safe and tidy
ProTek RC "TruTorque" Standard Hex Replacement Tip (1/16") (PTK-8240)
This is a 1/16" Allen Hex Wrench replacement Tip from Protek.
Replacement tip only
ProTek RC "TruTorque" Standard Hex Ball End Replacement Tip (3/32") (PTK-8263)
This is a 3/32" Ball End Allen Hex Wrench replacement Tip from Protek.
Replacement tip only
Kyosho 1st Spur Gear (51T): FW-06 (KYO KP VS006)
This is a 51Tooth 1st Spur Gear from Kyosho to fit their On-Road FW-06 race car.
Fits the Kyosho FW-06
Agama Front Shock Shafts (2): A8 (AG-8250)
This is a packet of (2) Front Shock Shafts from Agama for their A8 Buggy.
Replace old, worn, damaged parts
Kyosho 3x29.5mm Suspension Shafts (2): MP9 (KYO KP IF425-29.5)
This is a packet of (2) 3x29.5mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.
Fits all MP9 models
VBC Racing Carbon Fiber Steering Stiffener Bar (VBC A-03-VBC-0078)
This is a Steering Stiffener Bar from VBC Racing for their WildFire Touring Cars.
Add some carbon fiber bling
VBC Racing Steering Swivel Tubes (4) (VBC B-02-VBC-0033)
This is a packet of (4) Steering Swivel Tubes from VBC Racing for their WildFire Touring Cars.
Packet of 4 Steering Swivel Tubes
VBC Racing M3x10 Set Screws (20) (VBC C-02-SC-SS-0310)
This is a packet of (20) M3x10 Set Screws from VBC Racing.
Packet of 20 M3x10 Set Screws
VBC Racing Front Stabilizer Set: WildFire (VBC D-05-VBC-0045)
This is a packet of front stabilizer set from VBC Racing for their WildFire Touring Car kits.
Assist tuning WildFire touring car
Agama Rod End Set (4): A8/ A8T/A215/A215E/A215T/A215SV (AG-1307)
This is a Rod End Set (4) from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Team Losi Racing 6.8mm Steering Ball Set: 8ight 2.0, 3.0 & 4.0 (LOSA6050)
This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits 8ight 2.0, 3.0 & 4.0 vehicles
Kyosho 3x35mm Suspension Shafts (2): MP9 (KYO KP IF425-35)
This is a packet of (2) 3x35mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.
This package also includes two screws
AKA Racing 1/10 "EVO" 4WD 2.4" Front Buggy Closed Cell Tire Inserts (2) (AKA 33021)
This is a packet of (2) 1/10 "EVO" 4WD Buggy Closed Cell Front Tire Inserts from AKA Racing.
AKA, the pioneer of the closed cell insert, has developed an insert specifically for use with AKA EVO 1/10 scale buggy tires.
These inserts were designed to decrease the lateral deflection of the tire while at the same time increasing vertical impact absorption, to provide better handling in the bumps.
Using a soft foam or hollowing out the inner circumference leaves the car feeling squirmy with a less accurate feeling through the bumps, not to mention a loss of durability. Gil Losi and Mark Pavidis knew this compromise was not the solution. The solution they found was the addition of lateral grooves to the inner diameter. The lateral grooves allow the insert to flex vertically, absorbing large impacts while still maintaining the lateral stability and overall durability AKA inserts are known for, providing you with a no compromise, high performance foam insert. The result is a more predictable handling car, with no sacrifice in insert durability.
AKA, the pioneer of the closed cell insert, has developed an insert specifically for use with AKA EVO 1/10 scale buggy tires.
These inserts were designed to decrease the lateral deflection of the tire while at the same time increasing vertical impact absorption, to provide better handling in the bumps.
Using a soft foam or hollowing out the inner circumference leaves the car feeling squirmy with a less accurate feeling through the bumps, not to mention a loss of durability. Gil Losi and Mark Pavidis knew this compromise was not the solution. The solution they found was the addition of lateral grooves to the inner diameter. The lateral grooves allow the insert to flex vertically, absorbing large impacts while still maintaining the lateral stability and overall durability AKA inserts are known for, providing you with a no compromise, high performance foam insert. The result is a more predictable handling car, with no sacrifice in insert durability.
These inserts are designed for the AKA EVO 4WD front wheels.
AKA Racing 1/10 "EVO" 4WD Front Wheels (2) (9.5mm Hex) (B44.2) (White) (AKA 23312W)
This is a packet of (2) 1/10 "EVO" 2.2 4WD Front White Wheels from AKA Racing.
These wheels are compatible with the Associated B44 family of buggies. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.
The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.
These wheels are compatible with the Associated B44 family of buggies. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.
The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.
These wheels are designed for the AKA "EVO" tires.
Out of Stock
$5.00 Inc Tax
$9.75
AKA Racing 1/10 "EVO" 4WD Front Wheels (2) (10mm Hex) (TLR 22 1.0/2.0) (White) (AKA 23211W)
This is a packet of (2) 1/10 "EVO" 2.2 4WD Front White Wheels from AKA Racing.
These wheels are compatible with the TLR 22 1.0 and 2.0 buggies with a 10mm front hex. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.
The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.
These wheels are compatible with the TLR 22 1.0 and 2.0 buggies with a 10mm front hex. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.
The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.
These wheels are designed for the AKA "EVO" tires.
AKA Racing "HEXlite" 2.2 Rear Wheel Stiffener (2) (Yellow) (AKA 33101Y)
This is a Packet of (2) "HEXlite" 2.2 Rear Wheel Stiffeners from AKA Racing intended for use with AKA Racing HEXlite rear 1/10 buggy wheels.
Revolutionary to the 1:10 buggy market is the optional wheel stiffener insert. It has been designed to help keep dirt from building up inside the wheel, making it go out of balance, and stiffens the already stiff wheel.
Revolutionary to the 1:10 buggy market is the optional wheel stiffener insert. It has been designed to help keep dirt from building up inside the wheel, making it go out of balance, and stiffens the already stiff wheel.
Prevents dirt from building up inside the wheel
AKA Racing "HEXlite" 2.2 Rear Wheel Stiffener (2) (White) (AKA 33101W)
This is a Packet of (2) "HEXlite" 2.2 Rear Wheel Stiffeners from AKA Racing intended for use with AKA Racing HEXlite rear 1/10 buggy wheels.
Revolutionary to the 1:10 buggy market is the optional wheel stiffener insert. It has been designed to help keep dirt from building up inside the wheel, making it go out of balance, and stiffens the already stiff wheel.
Revolutionary to the 1:10 buggy market is the optional wheel stiffener insert. It has been designed to help keep dirt from building up inside the wheel, making it go out of balance, and stiffens the already stiff wheel.
Prevents dirt from building up inside the wheel
Team Losi Racing Rear Shock Tower (Rear Motor): 22 & 22 2.0 (TLR2049)
This is a Rear Shock Tower from Team Losi Racing for their 1st and 2nd generation of the 22 buggy kit.
This shock tower is used when the motor is in the rear position.
This shock tower is used when the motor is in the rear position.
Used when the motor is in the rear position
Team Losi Racing 5x8x2.5mm Bearings (2) (TLR237000)
This is a packet of (2) replacement 5x8x2.5mm Bearings from Team Losi Racing and are intended for use with their 22 line of 1/10 scale vehicles, as well as the XXX line of 1/10 scale vehicles.
These bearings are used in the ball differential.
These bearings are used in the ball differential.
Common bearing used in TLR ball differential.
Team Losi Racing 4mm Turnbuckle Rod End (12) : 22 3.0, 22-4 2.0 & 22 SCT (TLR6017)
This is a packet of (12) 4.0mm Rod Ends from Team Losi Racing designed for the 3rd Gen TLR 22 range.
Designed for 3rd Gen TLR 22 range
Yeah Racing Carbon Body Wing Protector (2) (YR YA-0278G)
This is a packet of (2) carbon fibre plates designed to protect the body of 1/10 touring car where the rear wing mounts
Features:
Features:
- For: On Road Cars
- Color: carbon fibre
Strengthen your 1/10 On-Road Body
Team Losi Racing 15mm Shock Shaft (4x57mm): 8IGHT & 8IGHT-T 2.0 (LOSA5413)
This is a 4x57mm Shock Shaft from Team Losi Racing for their 8IGHT racing buggy and 8ight-T Truggy 1.0 & 2.0.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
Kyosho 1/8 Front Bumper (KYO KP IF127)
This is a 1/8 Front Bumper from Kyosho for their older 1/8 buggies and truggies.
Fit a number of older 1/8 vehicles
Agama Throttle Brake Link: A8 / A8T / A215 (AG-6003)
This is a packet of (3) Throttle Brake Links from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Suspension Pin Bushing (8): A8/ A8T/A215/A215E/A215T/A215SV (AG-1116-W)
This is a packet of (8) Suspension Pin Bushings from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Agama Suspension Pin Bushing (Hollow Type)(8): A8/ A8T/A215/A215E/A215T/A215SV (AG-1117-W)
This is a packet of (8) Suspension Pin Bushings (Hollow Type) from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Yeah Racing Chassis Tweak Adjustment Washer (10) (Light Blue) (YR WR-0009BU)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
- Compatible to all graphite plate chassis design
- Material: Aluminium & Rubber
- Color: Blue
- 10x O-Ring Washer
- 10x O-Ring
Avoid Chassis Tweak on 1/10 On-road cars
Yeah Racing Chassis Tweak Adjustment Washer (10) (Black) (YR WR-0009BK)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
- Compatible to all graphite plate chassis design
- Material: Aluminum & Rubber
- Color: Black
- 10x O-Ring Washer
- 10x O-Ring
Avoid Chassis Tweak on 1/10 On-road cars
Spec-R Wing Screw Holder Set (SPR032-WH)
This is a packet of wing holders from Spec-R for 1/10 touring cars
REDS Racing Quattro Clutch Collet (REDS ES213023)
This is a 3.5cc Collet from REDS Racing and is intended for use with the .21 M & R Series REDS Engines.
1/8 Off-Road
Out of Stock
$4.00 Inc Tax
$4.95
Team Losi Racing Rear Chassis Brace: 8ight & 8ight-T 2.0 3.0 (LOSA4414)
This is a Rear Chassis Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0 & 3.0.
Fits 8ight & 8ight-T 1.0/2.0/3.0 Models
SWORKz 1/10 4WD Rear Wheels (2) (White): S104 (SW-2501811WH)
This is a packet of (2) White 4wd Rear Wheels from SWORKz for their 1/10 S104 Buggies.
Fits the SWORKz S104 Buggy
SWORKz 1/10 4WD Front Wheels (2) (White): S104 (SW-2501810WH)
This is a packet of (2) White 4wd Front Wheels from SWORKz for their 1/10 S104 Buggies.
Fits the SWORKz S104 Buggy